D: [iurt_root_command] chroot Building target platforms: armv7hl Building for target armv7hl Installing /home/iurt/rpmbuild/SRPMS/@2388754:perl-Scope-Upper-0.350.0-1.mga11.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.qSEhrE Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FsRhND + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + rm -rf Scope-Upper-0.35 + /usr/lib/rpm/rpmuncompress -x /home/iurt/rpmbuild/SOURCES/Scope-Upper-0.35.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd Scope-Upper-0.35 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.Ciszrx + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Scope-Upper-0.35 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Checking if this is an official release of perl... yes Checking if this is gcc 3.4 on Windows trying to link against an import library... no Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scope::Upper Writing MYMETA.yml and MYMETA.json + /usr/bin/make -O -j16 V=1 VERBOSE=1 Running Mkbootstrap for Upper () chmod 644 "Upper.bs" "/usr/bin/perl5.42.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Upper.bs blib/arch/auto/Scope/Upper/Upper.bs 644 cp lib/Scope/Upper.pm blib/lib/Scope/Upper.pm "/usr/bin/perl5.42.0" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Upper.xs > Upper.xsc mv Upper.xsc Upper.c gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"0.35\" -DXS_VERSION=\"0.35\" -fPIC "-I/usr/lib/perl5/CORE" -DSU_RELEASE=1 Upper.c rm -f blib/arch/auto/Scope/Upper/Upper.so gcc -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong Upper.o -o blib/arch/auto/Scope/Upper/Upper.so \ -lperl \ chmod 755 blib/arch/auto/Scope/Upper/Upper.so Manifying 1 pod document + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.Du5zbH + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT ++ dirname /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT + mkdir -p /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + mkdir /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Scope-Upper-0.35 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p' "/usr/bin/perl5.42.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Upper.bs blib/arch/auto/Scope/Upper/Upper.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/lib/perl5/vendor_perl/auto/Scope/Upper/Upper.so Installing /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/lib/perl5/vendor_perl/Scope/Upper.pm Installing /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/man/man3/Scope::Upper.3pm Appending installation info to /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/lib/perl5/perllocal.pod + /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 0.350.0-1.mga11 --unique-debug-suffix -0.350.0-1.mga11.arm --unique-debug-src-base perl-Scope-Upper-0.350.0-1.mga11.arm --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35 find-debuginfo: starting Extracting debug info from 1 files DWARF-compressing 1 files sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. Creating .debug symlinks for symlinks to ELF files Copying sources found by 'debugedit -l' to /usr/src/debug/perl-Scope-Upper-0.350.0-1.mga11.arm find-debuginfo: done + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs + env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16 + /usr/lib/rpm/redhat/brp-python-hardlink Reading /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/SPECPARTS/rpm-debuginfo.specpart Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.LfkXvw + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Scope-Upper-0.35 + '[' 1 -eq 1 ']' + /usr/bin/make -O -j16 V=1 VERBOSE=1 test "/usr/bin/perl5.42.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Upper.bs blib/arch/auto/Scope/Upper/Upper.bs 644 PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.42.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t # Testing Scope::Upper 0.35, Perl 5.042000, /usr/bin/perl5.42.0 t/00-load.t ...................... ok t/01-import.t .................... ok t/05-words.t ..................... ok t/06-want_at.t ................... ok t/07-context_info.t .............. ok # Using threads 2.43 # Using threads::shared 1.7 t/09-load-threads.t .............. ok t/11-reap-level.t ................ ok t/12-reap-block.t ................ ok t/13-reap-ctl.t .................. ok t/15-reap-multi.t ................ ok t/16-reap-numerous.t ............. ok t/20-localize-target.t ........... ok t/21-localize-level.t ............ ok t/22-localize-block.t ............ ok t/23-localize-ctl.t .............. ok t/24-localize-magic.t ............ ok t/25-localize-multi.t ............ ok t/26-localize-numerous.t ......... ok t/30-localize_elem-target.t ...... ok t/31-localize_elem-level.t ....... ok t/32-localize_elem-block.t ....... ok t/34-localize_elem-magic.t ....... ok t/36-localize_elem-numerous.t .... ok t/40-localize_delete-target.t .... ok t/41-localize_delete-level.t ..... ok t/44-localize_delete-magic.t ..... ok t/46-localize_delete-numerous.t .. ok t/50-unwind-target.t ............. ok t/51-unwind-multi.t .............. ok t/52-unwind-context.t ............ ok t/53-unwind-misc.t ............... ok # Using threads 2.43 # Using threads::shared 1.7 # Using usleep() from Time::HiRes 1.9778 t/54-unwind-threads.t ............ ok t/55-yield-target.t .............. ok t/57-yield-context.t ............. ok t/58-yield-misc.t ................ ok # Using threads 2.43 # Using threads::shared 1.7 # Using usleep() from Time::HiRes 1.9778 t/59-yield-threads.t ............. ok t/60-uplevel-target.t ............ ok t/61-uplevel-args.t .............. ok t/62-uplevel-return.t ............ ok t/63-uplevel-ctl.t ............... ok t/64-uplevel-caller.t ............ ok t/65-uplevel-multi.t ............. ok t/66-uplevel-context.t ........... ok t/67-uplevel-scope.t ............. ok # Using threads 2.43 # Using threads::shared 1.7 # Using usleep() from Time::HiRes 1.9778 t/69-uplevel-threads.t ........... ok t/70-uid-target.t ................ ok t/74-uid-validate.t .............. ok t/75-uid-uplevel.t ............... ok # Using threads 2.43 # Using threads::shared 1.7 # Using usleep() from Time::HiRes 1.9778 t/79-uid-threads.t ............... ok t/81-stress-level.t .............. ok t/84-stress-unwind.t ............. ok t/85-stress-yield.t .............. ok t/86-stress-uplevel.t ............ ok t/87-stress-uid.t ................ ok All tests successful. Files=54, Tests=89771, 9 wallclock secs ( 2.76 usr 0.25 sys + 7.33 cusr 0.87 csys = 11.21 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-Scope-Upper-0.350.0-1.mga11.armv7hl Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.CepSaU + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + cd Scope-Upper-0.35 + DOCDIR=/home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/CONTRIBUTING /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/Changes /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/META.json /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/META.yml /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/MYMETA.yml /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/README /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + cp -pr /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/Scope-Upper-0.35/samples /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT/usr/share/doc/perl-Scope-Upper + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl(Scope::Upper) = 0.350.0 perl-Scope-Upper = 0.350.0-1.mga11 perl-Scope-Upper(armv7hl-32) = 0.350.0-1.mga11 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libperl.so.5.42 perl >= 0:5.006_001 perl(Exporter) perl(XSLoader) perl(base) perl(strict) perl(warnings) perl-base >= 2:5.42.0 Processing files: perl-Scope-Upper-debugsource-0.350.0-1.mga11.armv7hl Provides: perl-Scope-Upper-debugsource = 0.350.0-1.mga11 perl-Scope-Upper-debugsource(armv7hl-32) = 0.350.0-1.mga11 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-Scope-Upper-debuginfo-0.350.0-1.mga11.armv7hl Provides: debuginfo(build-id) = 5fa7e04e925cc8e146592f5aa56152904ad294f3 perl-Scope-Upper-debuginfo = 0.350.0-1.mga11 perl-Scope-Upper-debuginfo(armv7hl-32) = 0.350.0-1.mga11 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: perl-Scope-Upper-debugsource(armv7hl-32) = 0.350.0-1.mga11 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build/BUILDROOT Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Scope-Upper-debugsource-0.350.0-1.mga11.armv7hl.rpm Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Scope-Upper-0.350.0-1.mga11.armv7hl.rpm Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Scope-Upper-debuginfo-0.350.0-1.mga11.armv7hl.rpm Executing(rmbuild): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.zXm6o5 + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + test -d /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + rm -rf /home/iurt/rpmbuild/BUILD/perl-Scope-Upper-0.350.0-build + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!