D: [iurt_root_command] chroot Building target platforms: armv7hl Building for target armv7hl Installing /home/iurt/rpmbuild/SRPMS/@2382700:perl-Libconf-0.42.10-31.mga11.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.CM97be Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.chLAvH + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + rm -rf perl-Libconf-0.42.10 + /usr/lib/rpm/rpmuncompress -x /home/iurt/rpmbuild/SOURCES/perl-Libconf-0.42.10.tar.bz2 + STATUS=0 + '[' 0 -ne 0 ']' + cd perl-Libconf-0.42.10 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (perl-Libconf-0.39.9-fix-drakups.patch):' Patch #0 (perl-Libconf-0.39.9-fix-drakups.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p0 --fuzz=0 patching file ./perl-Libconf/Glueconf/NUT/Ups_conf.pm Hunk #1 succeeded at 101 (offset 19 lines). + echo 'Patch #1 (perl-Libconf-fix-doc-build.patch):' Patch #1 (perl-Libconf-fix-doc-build.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p0 --fuzz=0 patching file ./doc/Makefile + echo 'Patch #2 (perl-Libconf-0.42.10-perl510.patch):' Patch #2 (perl-Libconf-0.42.10-perl510.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .perl510 --fuzz=0 patching file bindings/c/src/conf2xml.c + echo 'Patch #3 (perl-Libconf-0.42.10-perl-Libconf_Makefile-fix-indentation.patch):' Patch #3 (perl-Libconf-0.42.10-perl-Libconf_Makefile-fix-indentation.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .makefile-fix-indentation --fuzz=0 patching file perl-Libconf/Makefile + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.CH8EkA + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd perl-Libconf-0.42.10 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/make all 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard -Wall -O2 -fpic' 'BINDINGS=bash c' make -C perl-Libconf all make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf' if [ "x" = "x1" ]; then find . -type f | grep '.p.$' | xargs etags; fi cd .. && if [ ! -e Libconf ]; then ln -sf perl-Libconf Libconf; fi make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf' make -C bindings all make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings' for i in bash c; do make -C $i all; done; make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/bash' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/bash' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c' make -C src all make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c/src' gcc -Wall -fPIC -c conf2xml.c `perl -MExtUtils::Embed -e ccopts` conf2xml.c: In function 'conf2xml': conf2xml.c:71:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 71 | strncat(perl_code, perl_code1, strlen(perl_code1)); | ^ conf2xml.c:71:36: note: length computed here 71 | strncat(perl_code, perl_code1, strlen(perl_code1)); | ^~~~~~~~~~~~~~~~~~ conf2xml.c:72:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 72 | strncat(perl_code, filename, strlen(filename)); | ^ conf2xml.c:72:34: note: length computed here 72 | strncat(perl_code, filename, strlen(filename)); | ^~~~~~~~~~~~~~~~ conf2xml.c:73:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 73 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^ conf2xml.c:73:34: note: length computed here 73 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^~~~~~~~~~~~~~~~ conf2xml.c:74:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 74 | strncat(perl_code, template, strlen(template)); | ^ conf2xml.c:74:34: note: length computed here 74 | strncat(perl_code, template, strlen(template)); | ^~~~~~~~~~~~~~~~ conf2xml.c:75:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 75 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^ conf2xml.c:75:34: note: length computed here 75 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^~~~~~~~~~~~~~~~ conf2xml.c:76:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 76 | strncat(perl_code, template_options, strlen(template_options)); | ^ conf2xml.c:76:42: note: length computed here 76 | strncat(perl_code, template_options, strlen(template_options)); | ^~~~~~~~~~~~~~~~~~~~~~~~ conf2xml.c:77:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 77 | strncat(perl_code, perl_code2, strlen(perl_code2)); | ^ conf2xml.c:77:36: note: length computed here 77 | strncat(perl_code, perl_code2, strlen(perl_code2)); | ^~~~~~~~~~~~~~~~~~ conf2xml.c: In function 'xml2conf': conf2xml.c:130:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 130 | strncat(perl_code, perl_code1, strlen(perl_code1)); | ^ conf2xml.c:130:36: note: length computed here 130 | strncat(perl_code, perl_code1, strlen(perl_code1)); | ^~~~~~~~~~~~~~~~~~ conf2xml.c:131:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 131 | strncat(perl_code, xml_string, strlen(xml_string)); | ^ conf2xml.c:131:36: note: length computed here 131 | strncat(perl_code, xml_string, strlen(xml_string)); | ^~~~~~~~~~~~~~~~~~ conf2xml.c:132:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 132 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^ conf2xml.c:132:34: note: length computed here 132 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^~~~~~~~~~~~~~~~ conf2xml.c:133:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 133 | strncat(perl_code, filename, strlen(filename)); | ^ conf2xml.c:133:34: note: length computed here 133 | strncat(perl_code, filename, strlen(filename)); | ^~~~~~~~~~~~~~~~ conf2xml.c:134:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 134 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^ conf2xml.c:134:34: note: length computed here 134 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^~~~~~~~~~~~~~~~ conf2xml.c:135:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 135 | strncat(perl_code, template, strlen(template)); | ^ conf2xml.c:135:34: note: length computed here 135 | strncat(perl_code, template, strlen(template)); | ^~~~~~~~~~~~~~~~ conf2xml.c:136:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 136 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^ conf2xml.c:136:34: note: length computed here 136 | strncat(perl_code, perl_sep, strlen(perl_sep)); | ^~~~~~~~~~~~~~~~ conf2xml.c:137:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 137 | strncat(perl_code, template_options, strlen(template_options)); | ^ conf2xml.c:137:42: note: length computed here 137 | strncat(perl_code, template_options, strlen(template_options)); | ^~~~~~~~~~~~~~~~~~~~~~~~ conf2xml.c:138:5: warning: '__builtin___strncat_chk' specified bound depends on the length of the source argument [-Wstringop-overflow=] 138 | strncat(perl_code, perl_code2, strlen(perl_code2)); | ^ conf2xml.c:138:36: note: length computed here 138 | strncat(perl_code, perl_code2, strlen(perl_code2)); | ^~~~~~~~~~~~~~~~~~ perl -MExtUtils::Embed -e xsinit -- -o perlxsi.c gcc -Wall -fPIC -c perlxsi.c `perl -MExtUtils::Embed -e ccopts` gcc -Wall -fPIC -o libconf2xml.so -shared conf2xml.o perlxsi.o `perl -MExtUtils::Embed -e ccopts -e ldopts` make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c/src' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings' + /usr/bin/make -s check **** Libconf tests **** . successful test _ skipped test *********************** tput: unknown terminal "unknown" * testing autologin ....... done tput: unknown terminal "unknown" * testing proxy .. done tput: unknown terminal "unknown" * testing ebuild . done tput: unknown terminal "unknown" * testing keyvalue ...... done tput: unknown terminal "unknown" * testing inittab .... done tput: unknown terminal "unknown" * testing group .... done tput: unknown terminal "unknown" * testing passwd .... done tput: unknown terminal "unknown" * testing smb.conf ...... done tput: unknown terminal "unknown" * testing resolv .. done tput: unknown terminal "unknown" * testing postfix .. done tput: unknown terminal "unknown" * testing ups.conf ... done tput: unknown terminal "unknown" * testing msec ... done tput: unknown terminal "unknown" * testing xf86config ... done tput: unknown terminal "unknown" * testing gdm.conf .. done tput: unknown terminal "unknown" * testing lilo.conf . done **** Glueconf tests **** . successful test _ skipped test *********************** tput: unknown terminal "unknown" * testing autologin .... done tput: unknown terminal "unknown" * testing passwd .. done tput: unknown terminal "unknown" * testing resolv ..... done tput: unknown terminal "unknown" * testing shell ........ done tput: unknown terminal "unknown" * testing samba ....... done tput: unknown terminal "unknown" * testing ups .. done tput: unknown terminal "unknown" * testing postfix .. done tput: unknown terminal "unknown" * testing gdm .. done tput: unknown terminal "unknown" * testing inittab .... done tput: unknown terminal "unknown" * testing sshd_config ... done tput: unknown terminal "unknown" * testing hosts .. done tput: unknown terminal "unknown" * testing lilo . done **** C binding tests **** . successful test _ skipped test *********************** tput: unknown terminal "unknown" * testing samba . * testing samba : TEST N°1 FAILED tput: unknown terminal "unknown" * testing resolv . * testing resolv : TEST N°1 FAILED tput: unknown terminal "unknown" * testing shell . * testing shell : TEST N°1 FAILED + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.9pFMws + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT ++ dirname /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT + mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + mkdir /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd perl-Libconf-0.42.10 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT 'INSTALL=/usr/bin/install -p' PREFIX=/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr LIB_DIR=/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/lib NAME=perl-Libconf make -C perl-Libconf doc make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf pod2html --htmlroot=. Libconf.pm > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf.html for i in Templates.pm Glueconf.pm Conf2XML.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/`basename $i .pm`.html; \ done make -C Templates doc make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Templates for i in Shell.pm Group.pm Passwd.pm Samba.pm XF86Config.pm Inittab.pm Resolv.pm Ups.pm Gdm.pm Lilo.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Templates/`basename $i .pm`.html; \ done make -C Generic doc make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates/Generic' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Templates/Generic for i in KeyValue.pm KeyValues.pm Sections.pm KeyValueSections.pm Value.pm List.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Templates/Generic/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates/Generic' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates' make -C Glueconf doc make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf' for i in Generic Networking NUT Postfix Samba System X Samba Wrapper ; do \ make -C $i doc; \ done make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Generic' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Generic/ for i in ExportedCShell.pm ExportedShell.pm KeyValue.pm Shell.pm ValuesSection.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Generic/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Generic' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Networking' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Networking for i in Hosts.pm Resolv.pm Sshd_config.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Networking/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Networking' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/NUT' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/NUT/ for i in Ups_conf.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/NUT/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/NUT' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Postfix' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Postfix/ for i in Main_cf.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Postfix/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Postfix' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Samba/ for i in Smb_conf.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Samba/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/System' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/System/ for i in Autologin.pm Passwd.pm Inittab.pm Lilo.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/System/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/System' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/X' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/X/ for i in XF86Config.pm Gdm.pm Xdm.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/X/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/X' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Samba/ for i in Smb_conf.pm; do \ pod2html --htmlroot=. $i > /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc/html/Libconf/Glueconf/Samba/`basename $i .pm`.html; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Wrapper' for i in ; do \ make -C $i doc; \ done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Wrapper' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf' make -C bindings doc make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings' for i in c python ruby bash; do make -C $i doc; done; make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c' make[2]: 'doc' is up to date. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/python' make[2]: Nothing to be done for 'doc'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/python' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/ruby' make[2]: Nothing to be done for 'doc'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/ruby' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/bash' make[2]: Nothing to be done for 'doc'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/bash' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings' make -C perl-Libconf install make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/templates install -m 644 Libconf.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl install -m 644 Types.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf install -m 644 Glueconf.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf install -m 644 Conf2XML.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf install -m 644 Templates.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf install -m 644 libconf_powered.png /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf make -C Glueconf install make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf for i in Wrapper.pm; do install -m 644 $i /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf; done for i in Generic Networking NUT Postfix Samba System X Samba Wrapper ; do make -C $i; done make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Generic' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Generic install -m 644 ExportedCShell.pm ExportedShell.pm KeyValue.pm Shell.pm ValuesSection.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Generic make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Generic' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Networking' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Networking install -m 644 Hosts.pm Resolv.pm Sshd_config.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Networking make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Networking' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/NUT' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/NUT install -m 644 Ups_conf.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/NUT make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/NUT' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Postfix' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Postfix install -m 644 Main_cf.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Postfix make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Postfix' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Samba install -m 644 Smb_conf.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Samba make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/System' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/System install -m 644 Autologin.pm Passwd.pm Inittab.pm Lilo.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/System make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/System' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/X' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/X install -m 644 XF86Config.pm Gdm.pm Xdm.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/X make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/X' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Samba install -m 644 Smb_conf.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Samba make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Samba' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Wrapper' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Wrapper for i in Hash.pm; do install -m 644 $i /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Glueconf/Wrapper; done for i in ; do make -C $i; done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf/Wrapper' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Glueconf' make -C GUI install make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/GUI' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/GUI install -m 644 Gtk2.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/GUI for i in Gtk2; do make -C $i install; done make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/GUI/Gtk2' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/GUI/Gtk2 install -m 644 CheckButton.pm Combo.pm Entry.pm Hostname.pm SpinButton.pm Widget.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/GUI/Gtk2 for i in ; do make -C $i; done make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/GUI/Gtk2' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/GUI' make -C Templates install make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Templates install -m 644 Shell.pm Group.pm Passwd.pm Samba.pm XF86Config.pm Inittab.pm Resolv.pm Ups.pm Gdm.pm Lilo.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Templates make -C Generic install make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates/Generic' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Templates/Generic install -m 644 KeyValue.pm KeyValues.pm Sections.pm KeyValueSections.pm Value.pm List.pm /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/perl5/vendor_perl/Libconf/Templates/Generic make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates/Generic' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf/Templates' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/perl-Libconf' make -C bindings install make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings' for i in c python ruby bash; do make -C $i install; done; make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c' make -C src install make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c/src' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/lib install -m 0664 libconf2xml.so /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/lib/libconf2xml.so install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/include install -m 0664 conf2xml.h /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/include/conf2xml.h make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c/src' make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/c' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/python' cd src && python setup.py install --root=/ /usr/lib/python3.13/site-packages/setuptools/_distutils/cmd.py:90: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. Follow the current Python packaging guidelines when building Python RPM packages. This deprecation is overdue, please update your project and remove deprecated calls to avoid build errors in the future. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html and https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/ for details. ******************************************************************************** !! self.initialize_options() conf2xmlmodule.c:1:10: fatal error: Python.h: No such file or directory 1 | #include "Python.h" | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/gcc' failed with exit code 1 make[2]: *** [Makefile:6: install] Error 1 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/python' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/ruby' make -C src install make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/ruby/src' make[3]: *** No rule to make target 'install'. Stop. make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/ruby/src' make[2]: *** [Makefile:7: install] Error 2 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/ruby' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/bash' install -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/bin install -m 755 libconf /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/bin/libconf make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings/bash' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/bindings' make -C doc install make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc' mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf/html && cp -a html/* /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf/html rm -rf /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf/html/Libconf/Libconf ln -sf . /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf/html/Libconf/Libconf make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/doc' + rm -f /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT//usr/share/doc/perl-Libconf/html/Libconf/Libconf + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files Warning: undefined symbols in /usr/lib/libconf2xml.so: + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs + env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16 + /usr/lib/rpm/redhat/brp-python-hardlink Reading /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/SPECPARTS/rpm-debuginfo.specpart Processing files: perl-Libconf-0.42.10-31.mga11.armv7hl Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.rwjKnS + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + cd perl-Libconf-0.42.10 + DOCDIR=/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf + cp -pr /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/ChangeLog /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl(Libconf) = 0.42.10 perl(Libconf::Conf2XML) perl(Libconf::Glueconf) perl(Libconf::Glueconf::Generic::ExportedCShell) perl(Libconf::Glueconf::Generic::ExportedCShell::Wrapper) perl(Libconf::Glueconf::Generic::ExportedShell) perl(Libconf::Glueconf::Generic::ExportedShell::Wrapper) perl(Libconf::Glueconf::Generic::KeyValue) perl(Libconf::Glueconf::Generic::KeyValue::Wrapper) perl(Libconf::Glueconf::Generic::Shell) perl(Libconf::Glueconf::Generic::Shell::Wrapper) perl(Libconf::Glueconf::Generic::ValuesSection) perl(Libconf::Glueconf::Generic::ValuesSection::SectionWrapper) perl(Libconf::Glueconf::Generic::ValuesSection::Wrapper) perl(Libconf::Glueconf::NUT::Ups_conf) perl(Libconf::Glueconf::NUT::Ups_conf::SectionWrapper) perl(Libconf::Glueconf::NUT::Ups_conf::Wrapper) perl(Libconf::Glueconf::Networking::Hosts) perl(Libconf::Glueconf::Networking::Resolv) perl(Libconf::Glueconf::Networking::Resolv::Domain::Wrapper) perl(Libconf::Glueconf::Networking::Resolv::Nameserver::Wrapper) perl(Libconf::Glueconf::Networking::Resolv::Options::Wrapper) perl(Libconf::Glueconf::Networking::Resolv::Search::Wrapper) perl(Libconf::Glueconf::Networking::Resolv::Sortlist::Wrapper) perl(Libconf::Glueconf::Networking::Resolv::Wrapper) perl(Libconf::Glueconf::Networking::Sshd_config) perl(Libconf::Glueconf::Networking::Sshd_config::Wrapper) perl(Libconf::Glueconf::Postfix::Main_cf) perl(Libconf::Glueconf::Postfix::Main_cf::Wrapper) perl(Libconf::Glueconf::Samba::Smb_conf) perl(Libconf::Glueconf::Samba::Smb_conf::SectionWrapper) perl(Libconf::Glueconf::Samba::Smb_conf::Wrapper) perl(Libconf::Glueconf::System::Autologin) perl(Libconf::Glueconf::System::Inittab) perl(Libconf::Glueconf::System::Lilo) perl(Libconf::Glueconf::System::Lilo::Global) perl(Libconf::Glueconf::System::Lilo::GlobalKeyValueOptions) perl(Libconf::Glueconf::System::Lilo::GlobalValueOptions) perl(Libconf::Glueconf::System::Lilo::Kernels) perl(Libconf::Glueconf::System::Lilo::Others) perl(Libconf::Glueconf::System::Lilo::SectionKeyValueOptions) perl(Libconf::Glueconf::System::Lilo::SectionValueOptions) perl(Libconf::Glueconf::System::Lilo::SectionWrapper) perl(Libconf::Glueconf::System::Lilo::Wrapper) perl(Libconf::Glueconf::System::Passwd) perl(Libconf::Glueconf::System::Passwd::Wrapper) perl(Libconf::Glueconf::Wrapper) perl(Libconf::Glueconf::Wrapper::Hash) perl(Libconf::Glueconf::Wrapper::ValueCommentWrapper) perl(Libconf::Glueconf::X::Gdm) perl(Libconf::Glueconf::X::XF86Config) perl(Libconf::Glueconf::X::XF86Config::DisplaySectionWrapper) perl(Libconf::Glueconf::X::XF86Config::KVArrayWrapper) perl(Libconf::Glueconf::X::XF86Config::LoadSectionWrapper) perl(Libconf::Glueconf::X::XF86Config::MetaSectionWrapper) perl(Libconf::Glueconf::X::XF86Config::OptionSectionWrapper) perl(Libconf::Glueconf::X::XF86Config::SectionWrapper) perl(Libconf::Glueconf::X::XF86Config::Wrapper) perl(Libconf::Glueconf::X::Xdm) perl(Libconf::Templates) perl(Libconf::Templates::Gdm) perl(Libconf::Templates::Generic::KeyValue) perl(Libconf::Templates::Generic::KeyValueSections) perl(Libconf::Templates::Generic::KeyValues) perl(Libconf::Templates::Generic::List) perl(Libconf::Templates::Generic::Sections) perl(Libconf::Templates::Generic::Value) perl(Libconf::Templates::Group) perl(Libconf::Templates::Inittab) perl(Libconf::Templates::Lilo) perl(Libconf::Templates::Passwd) perl(Libconf::Templates::Resolv) perl(Libconf::Templates::Samba) perl(Libconf::Templates::Shell) perl(Libconf::Templates::Ups) perl(Libconf::Templates::XF86Config) perl(Libconf::Types) perl-Libconf = 0.42.10-31.mga11 perl-Libconf(armv7hl-32) = 0.42.10-31.mga11 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl(Data::Dumper) perl(Exporter) perl(FileHandle) perl(IPC::Open2) perl(Libconf) perl(Libconf::Glueconf) perl(Libconf::Glueconf::Generic::KeyValue) perl(Libconf::Glueconf::Generic::Shell) perl(Libconf::Glueconf::Generic::ValuesSection) perl(Libconf::Glueconf::System::Passwd) perl(Libconf::Glueconf::Wrapper) perl(Libconf::Glueconf::Wrapper::Hash) perl(Libconf::Templates) perl(Libconf::Templates::Gdm) perl(Libconf::Templates::Generic::KeyValue) perl(Libconf::Templates::Generic::KeyValueSections) perl(Libconf::Templates::Generic::KeyValues) perl(Libconf::Templates::Generic::List) perl(Libconf::Templates::Generic::Sections) perl(Libconf::Templates::Generic::Value) perl(Libconf::Templates::Inittab) perl(Libconf::Templates::Lilo) perl(Libconf::Templates::Passwd) perl(Libconf::Templates::Resolv) perl(Libconf::Templates::Samba) perl(Libconf::Templates::Shell) perl(Libconf::Templates::Ups) perl(Libconf::Templates::XF86Config) perl(Text::DelimMatch) perl(strict) perl(vars) perl-base >= 2:5.42.0 Obsoletes: perl-Libconf-gui < 0.42.10-31 Processing files: perl-Libconf-samples-0.42.10-31.mga11.armv7hl Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.nNupnA + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + cd perl-Libconf-0.42.10 + DOCDIR=/home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf-samples + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf-samples + cp -pr /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/perl-Libconf-0.42.10/ChangeLog /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT/usr/share/doc/perl-Libconf-samples + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl-Libconf-samples = 0.42.10-31.mga11 perl-Libconf-samples(armv7hl-32) = 0.42.10-31.mga11 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl(Data::Dumper) perl(Getopt::Long) perl(Term::ReadLine) perl(Text::ParseWords) perl-base >= 2:5.42.0 Processing files: perl-Libconf-devel-0.42.10-31.mga11.armv7hl Provides: libconf2xml.so perl-Libconf-devel = 0.42.10-31.mga11 perl-Libconf-devel(armv7hl-32) = 0.42.10-31.mga11 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libperl.so.5.42 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build/BUILDROOT Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Libconf-devel-0.42.10-31.mga11.armv7hl.rpm Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Libconf-samples-0.42.10-31.mga11.armv7hl.rpm Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Libconf-0.42.10-31.mga11.armv7hl.rpm Executing(rmbuild): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.n7xnWw + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + test -d /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + rm -rf /home/iurt/rpmbuild/BUILD/perl-Libconf-0.42.10-build + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!