D: [iurt_root_command] chroot Building target platforms: i686 Building for target i686 Installing /home/iurt/rpmbuild/SRPMS/@2317365:zapata-1.4.12.1-19.mga10.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.54Sfq0 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.XuDTaF + umask 022 + cd /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + rm -rf zaptel-1.4.12.1 + /usr/lib/rpm/rpmuncompress -x /home/iurt/rpmbuild/SOURCES/zaptel-1.4.12.1.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd zaptel-1.4.12.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (zaptel-1.4.12.1-printf.diff):' Patch #0 (zaptel-1.4.12.1-printf.diff): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .fprintf --fuzz=0 patching file ztcfg.c + echo 'Patch #1 (zaptel-1.4.12.1-makefile.diff):' Patch #1 (zaptel-1.4.12.1-makefile.diff): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .kernel --fuzz=0 patching file Makefile + echo 'Patch #2 (zaptel-1.4.12.1-firmware.diff):' Patch #2 (zaptel-1.4.12.1-firmware.diff): + /usr/bin/patch --no-backup-if-mismatch -f -p0 -b --suffix .firmware --fuzz=0 patching file Makefile + echo 'Patch #3 (zaptel-1.4.12-missing-include.patch):' Patch #3 (zaptel-1.4.12-missing-include.patch): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .include --fuzz=0 patching file menuselect/strcompat.c + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/autoconf.h . + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz -C ./firmware/ zaptel-fw-oct6114-064.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz -C ./firmware/ zaptel-fw-oct6114-128.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz -C ./firmware/ zaptel-fw-tc400m.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz -C ./firmware/ zaptel-fw-vpmadt032.bin + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.auMnxs + umask 022 + cd /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd zaptel-1.4.12.1 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + CONFIGURE_TOP=. + '[' 1 = 1 ']' ++ find . -name config.guess -o -name config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./menuselect/config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./menuselect/config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./menuselect/config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./menuselect/config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./menuselect/config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./menuselect/config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./config.guess + /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html) + /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool + /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking + /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs . + /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib + ./configure --host=i686-mageia-linux-gnu --build=i686-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking for i686-mageia-linux-gnu-gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking for GNU make... make checking for grep... /usr/bin/grep checking for sh... /bin/sh checking for ln... /usr/bin/ln checking for wget... /usr/bin/wget checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for newtBell in -lnewt... no checking for usb_init in -lusb... no configure: creating ./config.status config.status: creating build_tools/menuselect-deps config.status: creating makeopts config.status: creating build_tools/make_firmware_object configure: *** Zaptel build successfully configured *** + /usr/bin/make -O -j12 V=1 VERBOSE=1 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf"' prefix=/usr libdir=/usr/lib BIN_DIR=/usr/sbin Generating input for menuselect ... make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for GNU make... make checking for asprintf... yes checking for getloadavg... yes checking for setenv... yes checking for strcasestr... yes checking for strndup... yes checking for strnlen... yes checking for strsep... yes checking for strtoq... yes checking for unsetenv... yes checking for vasprintf... yes checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... no checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for pkg-config... pkg-config Package gtk+-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `gtk+-2.0.pc' to the PKG_CONFIG_PATH environment variable Package 'gtk+-2.0' not found configure: creating ./config.status config.status: creating makeopts config.status: creating autoconfig.h configure: configuring in mxml configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' 'LDFLAGS=-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' --cache-file=/dev/null --srcdir=. checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for cp... /usr/bin/cp checking for ln... /usr/bin/ln checking for mkdir... /usr/bin/mkdir checking for nroff... no checking for groff... no checking for rm... /usr/bin/rm checking for strdup... yes checking for vsnprintf... yes configure: creating ./config.status config.status: creating Makefile config.status: creating mxml.list config.status: creating mxml.pc config.status: creating config.h configure: Menuselect build configuration successfully completed make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o strcompat.o strcompat.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-string.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-private.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-entity.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-set.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-attr.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-search.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-node.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-index.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o menuselect_curses.o menuselect_curses.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o menuselect.o menuselect.c : warning: ISO C99 requires whitespace after the macro name menuselect.c: In function 'generate_makeopts_file': menuselect.c:1027:41: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 1027 | system(rmcommand); | ^~~~~~~~~~~~~~~~~ menuselect.c:1037:33: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 1037 | system(rmcommand); | ^~~~~~~~~~~~~~~~~ make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-file.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' /usr/bin/rm -f libmxml.a /usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o a - mxml-attr.o a - mxml-entity.o a - mxml-file.o a - mxml-index.o a - mxml-node.o a - mxml-search.o a - mxml-set.o a - mxml-private.o a - mxml-string.o ranlib libmxml.a make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect/mxml' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o mxml/libmxml.a mxml/libmxml.a -lncurses make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/menuselect' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -c -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zonedata.lo zonedata.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o zonedata.o zonedata.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' Building FXO modes from: ../../wctdm.c ../../fxo_modes.h perl -n -e 'print if (/^static struct fxo_mode {$/ .. /};$/)' ../../wctdm.c ../../fxo_modes.h >wctdm_fxomodes.h || rm -f wctdm_fxomodes.h make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztspeed.o -c ztspeed.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zt_registration > zt_registration.8 || rm -f zt_registration.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 xpp_sync > xpp_sync.8 || rm -f xpp_sync.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' for i in zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware; do perl -I./zconf -c $i || exit 1; done zt_registration syntax OK xpp_sync syntax OK lszaptel syntax OK xpp_blink syntax OK zapconf syntax OK zaptel_hardware syntax OK touch perlcheck make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 lszaptel > lszaptel.8 || rm -f lszaptel.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztspeed ztspeed.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 xpp_blink > xpp_blink.8 || rm -f xpp_blink.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zttest.o -c zttest.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zttest zttest.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zaptel_hardware > zaptel_hardware.8 || rm -f zaptel_hardware.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' gcc -o print_modes -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" print_modes.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' ./print_modes >init_fxo_modes make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztscan.o -c ztscan.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zapconf > zapconf.8 || rm -f zapconf.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztscan ztscan.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o tonezone.o tonezone.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' ar rcs libtonezone.a zonedata.o tonezone.o ranlib libtonezone.a make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -c -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o tonezone.lo tonezone.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -shared -Wl,-soname,libtonezone.so.1.0 -o libtonezone.so zonedata.lo tonezone.lo -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztmonitor.o -c ztmonitor.c : warning: ISO C99 requires whitespace after the macro name ztmonitor.c: In function 'main': ztmonitor.c:633:33: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 633 | write(afd, buf_tx, res_brx << 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ztmonitor.c:635:33: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 635 | write(afd, buf_brx, res_brx); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztmonitor ztmonitor.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o fxotune.o -c fxotune.c : warning: ISO C99 requires whitespace after the macro name fxotune.c: In function 'fxotune_read': fxotune.c:115:17: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 115 | write(audio_dump_fd, buffer, len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o fxotune fxotune.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztcfg.o -c ztcfg.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fPIC -DPIC -D_REENTRANT -Iinclude -DHAVE_STRTOQ -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztcfg ztcfg.o libtonezone.a -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.rR0yeG + umask 022 + cd /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT ++ dirname /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT + mkdir -p /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + mkdir /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -fomit-frame-pointer -m32 -march=i686 -msse2 -mtune=generic -mfpmath=sse -mstackrealign -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd zaptel-1.4.12.1 + '[' 1 -eq 1 ']' + install -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT//etc/rc.d/init.d + install -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT//etc + install -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/sysconfig + install -m0644 zaptel.conf.sample /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT//etc/zaptel.conf + install -m0755 zaptel.init /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT//etc/rc.d/init.d/zaptel + install -m0644 zaptel.sysconfig /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/sysconfig/zaptel + rm -rf /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT 'INSTALL=/usr/bin/install -p' libdir=/usr/lib includedir=/usr/include PERLLIBDIR=/usr/share/perl5/vendor_perl BIN_DIR=/usr/sbin make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1' mkdir -p /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/ctl rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/channel rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/pseudo rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/timer rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/transcode rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/253 rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/252 rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/251 rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/250 N=1; \ while [ $N -lt 250 ]; do \ rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/dev/zap/$N; \ N=$[$N+1]; \ done [ `id -u` = 0 ] && /sbin/depmod -a 5.15.126-server-1.mga8 || : make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' /usr/bin/install -p -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/sbin /usr/bin/install -p genzaptelconf zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/sbin/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/zaptel /usr/bin/install -p -m 644 ../firmwares/FPGA_1141.hex ../firmwares/FPGA_1151.hex ../firmwares/FPGA_FXS.hex ../firmwares/USB_FW.hex init_fxo_modes /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/zaptel/ /usr/bin/install -p ../init_card_1_30 ../init_card_2_30 ../init_card_3_30 ../init_card_4_30 xpp_fxloader /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/zaptel/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/man/man8 /usr/bin/install -p -m 644 genzaptelconf.8 zt_registration.8 xpp_sync.8 lszaptel.8 xpp_blink.8 zapconf.8 zaptel_hardware.8 /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/man/man8/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/hotplug/usb /usr/bin/install -p -m 644 xpp_fxloader.usermap /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/hotplug/usb/ # for backward compatibility and for hotplug users: ln -sf /usr/share/zaptel/xpp_fxloader /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/hotplug/usb/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/udev/rules.d /usr/bin/install -p -m 644 xpp.rules /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/udev/rules.d/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/perl5/vendor_perl for i in Zaptel Zaptel/Config Zaptel/Hardware Zaptel/Xpp; \ do \ /usr/bin/install -p -d "/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/perl5/vendor_perl/$i"; \ done for i in Zaptel.pm Zaptel/Chans.pm Zaptel/Hardware.pm Zaptel/Span.pm Zaptel/Utils.pm Zaptel/Xpp.pm Zaptel/Config/Defaults.pm Zaptel/Hardware/PCI.pm Zaptel/Hardware/USB.pm Zaptel/Xpp/Line.pm Zaptel/Xpp/Xbus.pm Zaptel/Xpp/Xpd.pm; \ do \ /usr/bin/install -p -m 644 "zconf/$i" "/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/perl5/vendor_perl/$i"; \ done make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/kernel/xpp/utils' install -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/sbin install fxotune ztcfg ztmonitor ztspeed zttest ztscan /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/sbin/ install -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/man/man8 install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/share/man/man8/ /usr/bin/install -p -D -m 644 zaptel.conf.sample /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/zaptel.conf /usr/bin/install -p -D -m 755 libtonezone.a /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib/libtonezone.a /usr/bin/install -p -D -m 755 libtonezone.so /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib/libtonezone.so.1.0 rm -f /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/liblibtonezone.so /usr/bin/ln -sf libtonezone.so.1.0 \ /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib/libtonezone.so.1 /usr/bin/ln -sf libtonezone.so.1.0 \ /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib/libtonezone.so /usr/bin/install -p -D -m 644 kernel/zaptel.h /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/include/zaptel/zaptel.h /usr/bin/install -p -D -m 644 tonezone.h /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/include/zaptel/tonezone.h /usr/bin/make -C firmware hotplug-install DESTDIR=/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT HOTPLUG_FIRMWARE=yes make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/firmware' mkdir -p /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib/hotplug/firmware mkdir -p /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/lib/firmware Installing zaptel-fw-oct6114-064.bin to hotplug firmware directories Installing zaptel-fw-oct6114-128.bin to hotplug firmware directories Installing zaptel-fw-tc400m.bin to hotplug firmware directories Installing zaptel-fw-vpmadt032.bin to hotplug firmware directories make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1/firmware' ################################################### ### ### Zaptel installed successfully. ### If you have not done so before, install init scripts with: ### ### make config ### ################################################### + mkdir -p /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib + mv /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/etc/udev /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT/usr/lib/ + find /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT -name '*.a' -delete + /usr/bin/find-debuginfo -j12 --strict-build-id -m -i --build-id-seed 1.4.12.1-19.mga10 --unique-debug-suffix -1.4.12.1-19.mga10.i386 --unique-debug-src-base zapata-1.4.12.1-19.mga10.i386 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/zaptel-1.4.12.1 find-debuginfo: starting Extracting debug info from 7 files DWARF-compressing 7 files sepdebugcrcfix: Updated 7 CRC32s, 0 CRC32s did match. Creating .debug symlinks for symlinks to ELF files Copying sources found by 'debugedit -l' to /usr/src/debug/zapata-1.4.12.1-19.mga10.i386 find-debuginfo: done + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/sbin/genzaptelconf from /bin/bash to #!/usr/bin/bash mangling shebang in /usr/share/zaptel/xpp_fxloader from /bin/bash to #!/usr/bin/bash + env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j12 + /usr/lib/rpm/redhat/brp-python-hardlink Reading /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/SPECPARTS/rpm-debuginfo.specpart Processing files: zapata-1.4.12.1-19.mga10.i686 Provides: zapata = 1.4.12.1-19.mga10 zapata(x86-32) = 1.4.12.1-19.mga10 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh Requires(preun): /bin/sh Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.34) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_ABI_GNU_TLS) libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libm.so.6(GLIBC_2.27) libm.so.6(GLIBC_2.29) perl(File::Basename) perl(Getopt::Std) perl(Zaptel) perl(Zaptel::Config::Defaults) perl(Zaptel::Hardware) perl(Zaptel::Span) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl(strict) perl-base >= 2:5.42.0 Processing files: zapata-firmware-1.4.12.1-19.mga10.i686 Provides: zapata-firmware = 1.4.12.1-19.mga10 zapata-firmware(x86-32) = 1.4.12.1-19.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: libzap1-1.4.12.1-19.mga10.i686 Provides: libtonezone.so.1.0 libzap1 = 1.4.12.1-19.mga10 libzap1(x86-32) = 1.4.12.1-19.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.29) Processing files: libzap-devel-1.4.12.1-19.mga10.i686 Provides: libzap-devel = 1.4.12.1 libzap-devel = 1.4.12.1-19.mga10 libzap-devel(x86-32) = 1.4.12.1-19.mga10 zapata-devel = 1.4.12.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-zapata-1.4.12.1-19.mga10.i686 Provides: perl(Zaptel) perl(Zaptel::Chans) perl(Zaptel::Config::Defaults) perl(Zaptel::Hardware) perl(Zaptel::Hardware::PCI) perl(Zaptel::Hardware::USB) perl(Zaptel::Span) perl(Zaptel::Utils) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Line) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl-zapata = 1.4.12.1-19.mga10 perl-zapata(x86-32) = 1.4.12.1-19.mga10 zapata-perl = 1.4.12.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl(Zaptel::Chans) perl(Zaptel::Hardware) perl(Zaptel::Hardware::PCI) perl(Zaptel::Hardware::USB) perl(Zaptel::Span) perl(Zaptel::Utils) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Line) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl(strict) perl-base >= 2:5.42.0 Processing files: zapata-debugsource-1.4.12.1-19.mga10.i686 Provides: zapata-debugsource = 1.4.12.1-19.mga10 zapata-debugsource(x86-32) = 1.4.12.1-19.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: zapata-debuginfo-1.4.12.1-19.mga10.i686 Provides: debuginfo(build-id) = 2864fc3adc0d3b966acca0eac7ffd976e575810d debuginfo(build-id) = 6d40dbf9a9158c040a94f1705983ee9ac13536db debuginfo(build-id) = 70fc99e233a1de6a05463d7c50c37ef96b56cded debuginfo(build-id) = 78a8327fb6ef5282fe5b781318f24d28497d559e debuginfo(build-id) = a57c3530939d2cd06f550e6783e5edb37aedb8d7 debuginfo(build-id) = ebab2c2bb32245fee2181d09d5f3945a750a772a zapata-debuginfo = 1.4.12.1-19.mga10 zapata-debuginfo(x86-32) = 1.4.12.1-19.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: zapata-debugsource(x86-32) = 1.4.12.1-19.mga10 Processing files: libzap1-debuginfo-1.4.12.1-19.mga10.i686 Provides: debuginfo(build-id) = 416561796a509b02f4cd956f9bbebd52df304272 libzap1-debuginfo = 1.4.12.1-19.mga10 libzap1-debuginfo(x86-32) = 1.4.12.1-19.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: zapata-debugsource(x86-32) = 1.4.12.1-19.mga10 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build/BUILDROOT Wrote: /home/iurt/rpmbuild/RPMS/i686/zapata-debuginfo-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/zapata-debugsource-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/libzap-devel-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/libzap1-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/perl-zapata-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/libzap1-debuginfo-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/zapata-1.4.12.1-19.mga10.i686.rpm Wrote: /home/iurt/rpmbuild/RPMS/i686/zapata-firmware-1.4.12.1-19.mga10.i686.rpm Executing(rmbuild): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FHwshJ + umask 022 + cd /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + test -d /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + rm -rf /home/iurt/rpmbuild/BUILD/zapata-1.4.12.1-build + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!