D: [iurt_root_command] chroot Building target platforms: armv7hl Building for target armv7hl Installing /home/iurt/rpmbuild/SRPMS/@2247868:perl-Crypt-SMIME-0.310.0-2.mga10.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.ZPXV2t Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.ug31tY + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + rm -rf Crypt-SMIME-0.31 + /usr/lib/rpm/rpmuncompress -x /home/iurt/rpmbuild/SOURCES/Crypt-SMIME-0.31.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd Crypt-SMIME-0.31 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.Z33yT6 + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Crypt-SMIME-0.31 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Checking if your kit is complete... Looks good checking for gettimeofday... yes checking for time... yes checking for libcrypto... 3.5.0 checking for LIBCRYPTO_CFLAGS... checking for LIBCRYPTO_LIBS... -lcrypto Generating a Unix-style Makefile Writing Makefile for Crypt::SMIME Writing MYMETA.yml and MYMETA.json + /usr/bin/make -O -j16 V=1 VERBOSE=1 Running Mkbootstrap for SMIME () chmod 644 "SMIME.bs" mkdir -p lib echo "# This file is automatically generated from SMIME.pl" > lib/SMIME.pm echo "# All of your changes will be lost if you edit this directly." >> lib/SMIME.pm cat SMIME.pl >> lib/SMIME.pm cat const-autoload.inc >> lib/SMIME.pm echo # >> lib/SMIME.pm echo __END__ >> lib/SMIME.pm echo # >> lib/SMIME.pm cat SMIME.pod >> lib/SMIME.pm "/usr/bin/perl5.40.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- SMIME.bs blib/arch/auto/Crypt/SMIME/SMIME.bs 644 cp lib/SMIME/JA.pod blib/lib/Crypt/SMIME/JA.pod cp lib/SMIME.pm blib/lib/Crypt/SMIME.pm "/usr/bin/perl5.40.1" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31/typemap' SMIME.xs > SMIME.xsc mv SMIME.xsc SMIME.c gcc -c -DOPENSSL_LOAD_CONF -DHAVE_GETTIMEOFDAY -DHAVE_SYS_TIME_H -DHAVE_TIME -DHAVE_TIME_H -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"0.31\" -DXS_VERSION=\"0.31\" -fPIC "-I/usr/lib/perl5/CORE" SMIME.c SMIME.c: In function 'XS_Crypt__SMIME_DESTROY': SMIME.c:679:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 679 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_setPrivateKey': SMIME.c:726:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 726 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_setPrivateKeyPkcs12': SMIME.c:794:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 794 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_setPublicKey': SMIME.c:870:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 870 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME__addPublicKey': SMIME.c:983:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 983 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_setPublicKeyStore': SMIME.c:1051:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1051 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME__sign': SMIME.c:1172:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1172 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME__signonly': SMIME.c:1215:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1215 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME__encrypt': SMIME.c:1258:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1258 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_check': SMIME.c:1309:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1309 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_decrypt': SMIME.c:1357:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1357 | this = (Crypt_SMIME) tmp; | ^ SMIME.c: In function 'XS_Crypt__SMIME_setAtTime': SMIME.c:1672:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1672 | this = (Crypt_SMIME) tmp; | ^ rm -f blib/arch/auto/Crypt/SMIME/SMIME.so gcc -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong SMIME.o -o blib/arch/auto/Crypt/SMIME/SMIME.so \ -lcrypto -lperl \ chmod 755 blib/arch/auto/Crypt/SMIME/SMIME.so Manifying 2 pod documents + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.8VBqos + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT ++ dirname /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT + mkdir -p /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + mkdir /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Crypt-SMIME-0.31 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p' "/usr/bin/perl5.40.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- SMIME.bs blib/arch/auto/Crypt/SMIME/SMIME.bs 644 Manifying 2 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/lib/perl5/vendor_perl/auto/Crypt/SMIME/SMIME.so Installing /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/lib/perl5/vendor_perl/Crypt/SMIME.pm Installing /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/lib/perl5/vendor_perl/Crypt/SMIME/JA.pod Installing /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/man/man3/SMIME::JA.3pm Installing /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/man/man3/SMIME.3pm Appending installation info to /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/lib/perl5/perllocal.pod + /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 0.310.0-2.mga10 --unique-debug-suffix -0.310.0-2.mga10.arm --unique-debug-src-base perl-Crypt-SMIME-0.310.0-2.mga10.arm --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31 find-debuginfo: starting Extracting debug info from 1 files DWARF-compressing 1 files sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. Creating .debug symlinks for symlinks to ELF files Copying sources found by 'debugedit -l' to /usr/src/debug/perl-Crypt-SMIME-0.310.0-2.mga10.arm find-debuginfo: done + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs + env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16 + /usr/lib/rpm/redhat/brp-python-hardlink Reading /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/SPECPARTS/rpm-debuginfo.specpart Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.O5SukJ + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -march=armv7-a -mfpu=vfpv3-d16 -mtune=generic-armv7-a -mabi=aapcs-linux -mfloat-abi=hard ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd Crypt-SMIME-0.31 + '[' 1 -eq 1 ']' + rm -f t/manifest.t + /usr/bin/make -O -j16 V=1 VERBOSE=1 test "/usr/bin/perl5.40.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- SMIME.bs blib/arch/auto/Crypt/SMIME/SMIME.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl5.40.1" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t # Testing Crypt::SMIME 0.31, Perl 5.040001, /usr/bin/perl5.40.1 t/00-load.t ........... ok t/01-smime.t .......... skipped: Executable `openssl' was not found t/02-smime.more.t ..... skipped: Executable `openssl' was not found t/03-chained-certs.t .. skipped: Executable `openssl' was not found t/04-taint.t .......... skipped: Test::Taint 1.06 required for testing behaviors on tainted inputs t/boilerplate.t ....... ok t/pod-coverage.t ...... skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.t ............... skipped: Test::Pod 1.14 required for testing POD All tests successful. Files=8, Tests=4, 1 wallclock secs ( 0.02 usr 0.03 sys + 0.67 cusr 0.06 csys = 0.78 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-Crypt-SMIME-0.310.0-2.mga10.armv7hl Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.XJEl9X + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + cd Crypt-SMIME-0.31 + DOCDIR=/home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + cp -pr /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31/Changes /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + cp -pr /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31/META.json /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + cp -pr /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31/META.yml /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + cp -pr /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31/MYMETA.yml /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + cp -pr /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/Crypt-SMIME-0.31/README /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT/usr/share/doc/perl-Crypt-SMIME + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl(Crypt::SMIME) = 0.310.0 perl-Crypt-SMIME = 0.310.0-2.mga10 perl-Crypt-SMIME(armv7hl-32) = 0.310.0-2.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.4) libcrypto.so.3 libcrypto.so.3(OPENSSL_3.0.0) libperl.so.5.40 perl(Exporter) perl(XSLoader) perl(strict) perl(warnings) perl-base >= 2:5.40.1 Processing files: perl-Crypt-SMIME-debugsource-0.310.0-2.mga10.armv7hl Provides: perl-Crypt-SMIME-debugsource = 0.310.0-2.mga10 perl-Crypt-SMIME-debugsource(armv7hl-32) = 0.310.0-2.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-Crypt-SMIME-debuginfo-0.310.0-2.mga10.armv7hl Provides: debuginfo(build-id) = 81c3eaaa65d7a27a9c6d0e852469018a408b0079 perl-Crypt-SMIME-debuginfo = 0.310.0-2.mga10 perl-Crypt-SMIME-debuginfo(armv7hl-32) = 0.310.0-2.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: perl-Crypt-SMIME-debugsource(armv7hl-32) = 0.310.0-2.mga10 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build/BUILDROOT Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Crypt-SMIME-0.310.0-2.mga10.armv7hl.rpm Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Crypt-SMIME-debuginfo-0.310.0-2.mga10.armv7hl.rpm Wrote: /home/iurt/rpmbuild/RPMS/armv7hl/perl-Crypt-SMIME-debugsource-0.310.0-2.mga10.armv7hl.rpm Executing(rmbuild): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.9ZUfhy + umask 022 + cd /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + test -d /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + rm -rf /home/iurt/rpmbuild/BUILD/perl-Crypt-SMIME-0.310.0-build + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!