D: [iurt_root_command] chroot
Building target platforms: x86_64
Building for target x86_64
Installing /home/pterjan/rpmbuild/SRPMS/system-config-printer-1.5.18-5.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ucclVe
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.nfPOVQ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.18-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.18-build
+ rm -rf system-config-printer-1.5.18
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/system-config-printer-1.5.18.tar.xz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd system-config-printer-1.5.18
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #200 (system-config-printer-1.5.0-mga_custom-applet.patch):'
Patch #200 (system-config-printer-1.5.0-mga_custom-applet.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .mga_custom-applet --fuzz=0
patching file applet.py
Hunk #2 succeeded at 119 (offset 8 lines).
Hunk #3 succeeded at 383 (offset 8 lines).
+ echo 'Patch #202 (system-config-printer-1.5.6-mga_custom-system-config-printer.patch):'
Patch #202 (system-config-printer-1.5.6-mga_custom-system-config-printer.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .mga_custom-system-config-printer --fuzz=0
patching file newprinter.py
Hunk #2 succeeded at 1366 (offset 204 lines).
Hunk #3 succeeded at 1635 (offset 336 lines).
Hunk #4 succeeded at 3273 (offset 398 lines).
patching file ppdsloader.py
patching file system-config-printer.py
Hunk #2 succeeded at 546 (offset 90 lines).
Hunk #3 succeeded at 1986 (offset 156 lines).
patching file udev/udev-add-printer
Hunk #3 succeeded at 108 (offset 1 line).
Hunk #4 succeeded at 198 (offset 1 line).
Hunk #5 succeeded at 219 (offset 1 line).
+ echo 'Patch #203 (system-config-printer-1.5.2-start-applet.patch):'
Patch #203 (system-config-printer-1.5.2-start-applet.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .start_applet --fuzz=0
patching file print-applet.desktop.in
+ echo 'Patch #204 (system-config-printer-1.4.4-udev-configure-printer-mga.patch):'
Patch #204 (system-config-printer-1.4.4-udev-configure-printer-mga.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .udev-configue-printer-mga --fuzz=0
patching file configure.ac
Hunk #1 succeeded at 61 (offset 28 lines).
patching file Makefile.am
Hunk #1 succeeded at 190 (offset 8 lines).
patching file udev/udev-configure-printer.c
Hunk #2 succeeded at 1000 (offset 7 lines).
Hunk #3 succeeded at 1938 (offset 26 lines).
Hunk #4 succeeded at 2033 (offset 33 lines).
Hunk #5 succeeded at 2180 (offset 39 lines).
Hunk #6 succeeded at 2309 (offset 72 lines).
+ echo 'Patch #300 (system-config-printer-1.3.7-remove-Brother-HL-2030-blacklist.patch):'
Patch #300 (system-config-printer-1.3.7-remove-Brother-HL-2030-blacklist.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p0 -b --suffix .mga-1349 --fuzz=0
patching file ./xml/preferreddrivers.xml
Hunk #1 succeeded at 199 (offset 7 lines).
+ echo 'Patch #301 (system-config-printer-1.5.5-mga_visual-artifacts.patch):'
Patch #301 (system-config-printer-1.5.5-mga_visual-artifacts.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p0 -b --suffix .mga-14981 --fuzz=0
patching file system-config-printer.py
Hunk #1 succeeded at 1077 (offset 77 lines).
Hunk #2 succeeded at 1090 (offset 77 lines).
Hunk #3 succeeded at 1109 (offset 80 lines).
+ echo 'Patch #302 (apply-new-udev-rules.patch):'
Patch #302 (apply-new-udev-rules.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p0 --fuzz=0
patching file system-config-printer.py
Hunk #1 succeeded at 550 (offset 41 lines).
+ echo 'Patch #303 (avoid-reinstall-of-libsane-hpaio.patch):'
Patch #303 (avoid-reinstall-of-libsane-hpaio.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p0 --fuzz=0
patching file newprinter.py
Hunk #1 succeeded at 1529 (offset -14 lines).
+ echo 'Patch #304 (system-config-printer-mga_custom-print-testpage-location.patch):'
Patch #304 (system-config-printer-mga_custom-print-testpage-location.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .custom-location --fuzz=0
patching file printerproperties.py
+ echo 'Patch #1001 (0001-Fix-debugprint-in-options.py-fixes-291.patch):'
Patch #1001 (0001-Fix-debugprint-in-options.py-fixes-291.patch):
+ /usr/bin/patch --no-backup-if-mismatch -f -p1 --fuzz=0
patching file options.py
+ sed -i 's/setup.py install --prefix=$(DESTDIR)$(prefix)/setup.py install --root $(DESTDIR) --prefix=$(prefix)/' Makefile.am Makefile.am.udev-configue-printer-mga Makefile.in
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.MzUXDs
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.18-build
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full '
+ export FFLAGS
+ FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd system-config-printer-1.5.18
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ ./bootstrap
autopoint: *** AM_GNU_GETTEXT without 'external' argument is no longer supported in version 0.20
autopoint: *** Stop.
configure.ac:4: warning: macro 'AM_GNU_GETTEXT_VERSION' not found in library
configure.ac:6: warning: macro 'AM_GNU_GETTEXT' not found in library
configure.ac:5: error: macro AM_GNU_GETTEXT is not defined; is a m4 file missing?
/usr/share/aclocal/ax_require_defined.m4:35: AX_REQUIRE_DEFINED is expanded from...
configure.ac:5: the top level
autom4te: error: /usr/bin/m4 failed with exit status: 1
aclocal: error: autom4te failed with exit status: 1
aclocal.m4:17: warning: this file was generated for autoconf 2.71.
You have another version of autoconf.  It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.
configure.ac:3: error: version mismatch.  This is Automake 1.18.1,
configure.ac:3: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:3: comes from Automake 1.16.5.  You should run
configure.ac:3: autoreconf -f (or otherwise erase all old files, run
configure.ac:3: aclocal to recreate aclocal.m4, and rerun automake).
aclocal.m4:17: warning: this file was generated for autoconf 2.71.
You have another version of autoconf.  It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.
configure.ac:20: warning: The macro 'AC_HELP_STRING' is obsolete.
configure.ac:20: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.ac:20: the top level
configure.ac:67: warning: The macro 'AC_HELP_STRING' is obsolete.
configure.ac:67: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.ac:67: the top level
configure.ac:103: warning: The macro 'AC_HELP_STRING' is obsolete.
configure.ac:103: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.ac:103: the top level
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full '
+ export FFLAGS
+ FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ CONFIGURE_TOP=.
+ '[' 1 = 1 ']'
++ find . -name config.guess -o -name config.sub
+ for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub)
++ basename ./config.guess
+ '[' -f /usr/lib/rpm/mageia/config.guess ']'
++ basename ./config.guess
+ cp -af /usr/lib/rpm/mageia/config.guess ./config.guess
+ for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub)
++ basename ./config.sub
+ '[' -f /usr/lib/rpm/mageia/config.sub ']'
++ basename ./config.sub
+ cp -af /usr/lib/rpm/mageia/config.sub ./config.sub
+ /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool
Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html)
+ /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool
+ /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking
+ /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs .
+ /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64
+ ./configure --host=x86_64-mageia-linux-gnu --build=x86_64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-systemdsystemunitdir=/usr/lib/systemd/system --with-udev-rules
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking whether make supports the include directive... yes (GNU style)
checking for x86_64-mageia-linux-gnu-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking build system type... x86_64-mageia-linux-gnu
checking host system type... x86_64-mageia-linux-gnu
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking 32-bit host C ABI... no
checking how to run the C preprocessor... gcc -E
checking for egrep -e... /usr/bin/grep -E
checking for ELF binary format... yes
checking for the common suffixes of directories in the library search path... lib,lib,lib64
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyPreferredLanguages... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for a Python interpreter with version >= 3... python
checking for python... /usr/bin/python
checking for python version... 3.13
checking for python platform... linux
checking for GNU default python prefix... ${prefix}
checking for GNU default python exec_prefix... ${exec_prefix}
checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.13/site-packages
checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.13/site-packages
checking for x86_64-mageia-linux-gnu-pkg-config... /usr/bin/x86_64-mageia-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CUPS SERVERBIN dir... /usr/lib/cups
checking for GLIB... yes
checking for DBUS... yes
checking for DBUSGLIB... yes
checking for libudev... yes
checking for libusb... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: creating system-config-printer
config.status: creating system-config-printer-applet
config.status: creating install-printerdriver
config.status: creating dbus/scp-dbus-service
config.status: creating udev/configure-printer@.service
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing depfiles commands
+ /usr/bin/make
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/home/pterjan/rpmbuild/BUILD/system-config-printer-1.5.18-build/system-config-printer-1.5.18/missing' aclocal-1.16 
configure.ac:4: warning: macro 'AM_GNU_GETTEXT_VERSION' not found in library
configure.ac:6: warning: macro 'AM_GNU_GETTEXT' not found in library
configure.ac:5: error: macro AM_GNU_GETTEXT is not defined; is a m4 file missing?
/usr/share/aclocal/ax_require_defined.m4:35: AX_REQUIRE_DEFINED is expanded from...
configure.ac:5: the top level
autom4te: error: /usr/bin/m4 failed with exit status: 1
aclocal-1.16: error: autom4te failed with exit status: 1
make: *** [Makefile:828: aclocal.m4] Error 1
error: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.MzUXDs (%build)

RPM build errors:
    Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.MzUXDs (%build)
I: [iurt_root_command] ERROR: chroot