D: [iurt_root_command] chroot Building target platforms: noarch Building for target noarch Installing /home/pterjan/rpmbuild/SRPMS/po-debconf-1.0.21-5.mga10.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.TdrNqX Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.41Vqp5 + umask 022 + cd /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + rm -rf po-debconf-1.0.21 + /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/po-debconf_1.0.21.tar.xz + STATUS=0 + '[' 0 -ne 0 ']' + cd po-debconf-1.0.21 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/po-debconf-1.0.16-no-utf8-to-pod2man.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.N1JRdr + umask 022 + cd /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd po-debconf-1.0.21 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/make /usr/bin/make -C doc make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21/doc' po4a -v --previous --rm-backups \ --package-name po-debconf \ --package-version 1.0.21 \ --msgid-bugs-address po-debconf@packages.debian.org \ po4a/po-debconf.cfg Using '/home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21/doc/po4a/po' as a po_directory. Found language 'de' in the provided po_directory: po4a/po/de.po Found language 'es' in the provided po_directory: po4a/po/es.po Found language 'fr' in the provided po_directory: po4a/po/fr.po Found POT file 'po4a/po/po-debconf.pot' in the provided po_directory. Found language 'pt' in the provided po_directory: po4a/po/pt.po Found language 'ru' in the provided po_directory: po4a/po/ru.po Found language 'vi' in the provided po_directory: po4a/po/vi.po POT file po4a/po/po-debconf.pot already up to date. Updating po4a/po/de.po: 310 translated messages. Updating po4a/po/es.po: 310 translated messages. Updating po4a/po/fr.po: 310 translated messages. Updating po4a/po/pt.po: 310 translated messages. Updating po4a/po/ru.po: 310 translated messages. Updating po4a/po/vi.po: 310 translated messages. po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! de/debconf-gettextize.1.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! de/debconf-updatepo.1.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! de/po2debconf.1.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! de/po-debconf.7.pod is 100% translated (98 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! de/podebconf-display-po.1.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! de/podebconf-report-po.1.pod is 100% translated (158 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! es/debconf-gettextize.1.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! es/debconf-updatepo.1.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! es/po2debconf.1.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! es/po-debconf.7.pod is 100% translated (98 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! es/podebconf-display-po.1.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! es/podebconf-report-po.1.pod is 100% translated (158 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! fr/debconf-gettextize.1.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! fr/debconf-updatepo.1.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! fr/po2debconf.1.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! fr/po-debconf.7.pod is 100% translated (98 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! fr/podebconf-display-po.1.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! fr/podebconf-report-po.1.pod is 100% translated (158 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pt/debconf-gettextize.1.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pt/debconf-updatepo.1.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pt/po2debconf.1.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pt/po-debconf.7.pod is 100% translated (98 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pt/podebconf-display-po.1.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pt/podebconf-report-po.1.pod is 100% translated (158 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ru/debconf-gettextize.1.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ru/debconf-updatepo.1.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ru/po2debconf.1.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ru/po-debconf.7.pod is 100% translated (98 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ru/podebconf-display-po.1.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ru/podebconf-report-po.1.pod is 100% translated (158 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! vi/debconf-gettextize.1.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! vi/debconf-updatepo.1.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! vi/po2debconf.1.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! vi/po-debconf.7.pod is 100% translated (98 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! vi/podebconf-display-po.1.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! vi/podebconf-report-po.1.pod is 100% translated (158 strings). for l in de en es fr pt ru vi; do \ for m in debconf-gettextize.1 debconf-updatepo.1 po2debconf.1 podebconf-display-po.1 podebconf-report-po.1 po-debconf.7; do \ test -f $l/$m.pod || continue; \ s=`echo $m | sed -e 's/.*\.//'`; \ p=`echo $m | sed -e 's/\..//'`; \ cp $l/$m.pod $p.pod; \ pod2man -r '' -c po-debconf --section=$s $p.pod > $l/$p.$s; \ # Fix the POD quotes (--quotes is not sufficient for the French quotes) \ case $l in \ de) \ sed -i -e 's/ds C` ""$/ds C` »/' \ -e "s/ds C' \"\"$/ds C' «/" \ $l/$p.$s; \ ;; \ fr) \ sed -i -e 's/ds C` ""$/ds C` «\\ /' \ -e "s/ds C' \"\"$/ds C' \\\\ »/" \ $l/$p.$s; \ ;; \ esac; \ rm -f $p.pod; \ test $l = en || mv $l/$p.$s $l/$p.$l.$s; \ done; \ done # groff does not support UTF-8 pages. build the Vietnames HTML pages for m in debconf-gettextize.1 debconf-updatepo.1 po2debconf.1 podebconf-display-po.1 podebconf-report-po.1 po-debconf.7; do \ test -f vi/$m.pod || continue; \ pod2html --quiet --noindex vi/$m.pod > vi/$m.html; \ done make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21/doc' /usr/bin/make fix make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21' make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.aBfQAH + umask 022 + cd /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + '[' 1 -eq 1 ']' + '[' /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT '!=' / ']' + rm -rf /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT ++ dirname /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + mkdir /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd po-debconf-1.0.21 + '[' 1 -eq 1 ']' + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/bin /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/po-debconf/ + for prog in debconf-gettextize debconf-updatepo po2debconf podebconf-display-po podebconf-report-po + install -m 755 debconf-gettextize /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/bin + for prog in debconf-gettextize debconf-updatepo po2debconf podebconf-display-po podebconf-report-po + install -m 755 debconf-updatepo /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/bin + for prog in debconf-gettextize debconf-updatepo po2debconf podebconf-display-po podebconf-report-po + install -m 755 po2debconf /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/bin + for prog in debconf-gettextize debconf-updatepo po2debconf podebconf-display-po podebconf-report-po + install -m 755 podebconf-display-po /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/bin + for prog in debconf-gettextize debconf-updatepo po2debconf podebconf-display-po podebconf-report-po + install -m 755 podebconf-report-po /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/bin + rm -rf doc/vi ++ find doc/ -name '*.1' -exec dirname '{}' ';' ++ sort -u + for lang_man in `find doc/ -name "*.1" -exec dirname {} \; | sort -u` + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/man1/ ++ basename doc/de ++ sed -e s/en//g + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/de/man1 ++ sed -e s/en//g ++ basename doc/de + install -m 644 doc/de/debconf-gettextize.de.1 doc/de/debconf-updatepo.de.1 doc/de/po2debconf.de.1 doc/de/podebconf-display-po.de.1 doc/de/podebconf-report-po.de.1 /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/de/man1 + for lang_man in `find doc/ -name "*.1" -exec dirname {} \; | sort -u` + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/man1/ ++ sed -e s/en//g ++ basename doc/en + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man//man1 ++ basename doc/en ++ sed -e s/en//g + install -m 644 doc/en/debconf-gettextize.1 doc/en/debconf-updatepo.1 doc/en/po2debconf.1 doc/en/podebconf-display-po.1 doc/en/podebconf-report-po.1 /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man//man1 + for lang_man in `find doc/ -name "*.1" -exec dirname {} \; | sort -u` + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/man1/ ++ basename doc/es ++ sed -e s/en//g + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/es/man1 ++ sed -e s/en//g ++ basename doc/es + install -m 644 doc/es/debconf-gettextize.es.1 doc/es/debconf-updatepo.es.1 doc/es/po2debconf.es.1 doc/es/podebconf-display-po.es.1 doc/es/podebconf-report-po.es.1 /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/es/man1 + for lang_man in `find doc/ -name "*.1" -exec dirname {} \; | sort -u` + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/man1/ ++ basename doc/fr ++ sed -e s/en//g + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/fr/man1 ++ basename doc/fr ++ sed -e s/en//g + install -m 644 doc/fr/debconf-gettextize.fr.1 doc/fr/debconf-updatepo.fr.1 doc/fr/po2debconf.fr.1 doc/fr/podebconf-display-po.fr.1 doc/fr/podebconf-report-po.fr.1 /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/fr/man1 + for lang_man in `find doc/ -name "*.1" -exec dirname {} \; | sort -u` + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/man1/ ++ basename doc/pt ++ sed -e s/en//g + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/pt/man1 ++ basename doc/pt ++ sed -e s/en//g + install -m 644 doc/pt/debconf-gettextize.pt.1 doc/pt/debconf-updatepo.pt.1 doc/pt/po2debconf.pt.1 doc/pt/podebconf-display-po.pt.1 doc/pt/podebconf-report-po.pt.1 /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/pt/man1 + for lang_man in `find doc/ -name "*.1" -exec dirname {} \; | sort -u` + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/man1/ ++ basename doc/ru ++ sed -e s/en//g + mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/ru/man1 ++ basename doc/ru ++ sed -e s/en//g + install -m 644 doc/ru/debconf-gettextize.ru.1 doc/ru/debconf-updatepo.ru.1 doc/ru/po2debconf.ru.1 doc/ru/podebconf-display-po.ru.1 doc/ru/podebconf-report-po.ru.1 /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/man/ru/man1 + install -m 644 encodings /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/po-debconf + install -m 755 pot-header /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/po-debconf/ + cp -a podebconf-report-po_templates/ /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT//usr/share/po-debconf/templates + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/bin/po2debconf from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/debconf-updatepo from /bin/sh to #!/usr/bin/sh *** WARNING: ./usr/share/po-debconf/pot-header is executable but has no shebang, removing executable bit + env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16 + /usr/lib/rpm/redhat/brp-python-hardlink Processing files: po-debconf-1.0.21-5.mga10.noarch Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.x7UIbA + umask 022 + cd /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + cd po-debconf-1.0.21 + DOCDIR=/home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT/usr/share/doc/po-debconf + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT/usr/share/doc/po-debconf + cp -pr /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21/COPYING /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT/usr/share/doc/po-debconf + cp -pr /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21/README /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT/usr/share/doc/po-debconf + cp -pr /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/po-debconf-1.0.21/README-trans /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT/usr/share/doc/po-debconf + RPM_EC=0 ++ jobs -p + exit 0 Provides: po-debconf = 1.0.21-5.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl(Cwd) perl(Debconf::AutoSelect) perl(Debconf::Config) perl(Debconf::Db) perl(Debconf::Template::Transient) perl(File::Path) perl(File::Spec) perl(File::Temp) perl(Getopt::Long) perl(MIME::Base64) perl(MIME::QuotedPrint) perl(POSIX) perl(Text::Tabs) perl(Text::Wrap) perl(strict) perl-base >= 2:5.42.0 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build/BUILDROOT Wrote: /home/pterjan/rpmbuild/RPMS/noarch/po-debconf-1.0.21-5.mga10.noarch.rpm Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.lKZuB3 + umask 022 + cd /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + test -d /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + rm -rf /home/pterjan/rpmbuild/BUILD/po-debconf-1.0.21-build + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!