D: [iurt_root_command] chroot Building target platforms: noarch Building for target noarch Installing /home/pterjan/rpmbuild/SRPMS/hardening-check-2.20.2-4.mga10.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.mydZUo Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.RCT6U8 + umask 022 + cd /home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build + rm -rf devscripts-2.20.2 + /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/devscripts_2.20.2.tar.xz + STATUS=0 + '[' 0 -ne 0 ']' + cd devscripts-2.20.2 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/hardening-check-locale_anti_barfer.diff + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/hardening-check-2.20.2-mga-docbook-path.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.To4KEi + umask 022 + cd /home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd devscripts-2.20.2 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/make -O -j16 V=1 VERBOSE=1 /usr/bin/make -C po4a/ make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' # po4a translate and clean need ../doc/devscripts.1, rebuild it make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' /usr/bin/make -C ../doc devscripts.1 make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/doc' cat devscripts.1.in > devscripts.1.tmp.2190369-2190366 cat ../README | \ awk '/^- annotate-output/,/^ mailing lists./'|sed -e '/^[[:space:]]*$/d' -e 's/^/ /g' | \ perl genmanpage.pl \ >> devscripts.1.tmp.2190369-2190366 mv devscripts.1.tmp.2190369-2190366 devscripts.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/doc' rm -f version dpkg-parsechangelog -SVersion > version /usr/bin/make -C scripts/ rm -f conf.default conf.default.tmp VERSION=`cat version` && sed -e "s/###VERSION###/$VERSION/" conf.default.in \ > conf.default.tmp && mv conf.default.tmp conf.default make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/scripts' dpkg-buildapi: error: cannot read debian/control: No such file or directory /usr/share/dpkg//buildapi.mk:14: *** non-numeric first argument to 'intcmp' function: empty value. Stop. make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/scripts' make: *** [Makefile:63: make_scripts] Error 2 make: *** Waiting for unfinished jobs.... make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' po4a --previous --no-backups --keep=0 devscripts-po4a.conf po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! (3491 entries) po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! touch translate make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/tagpending.fr.pl fr/tagpending.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/tagpending.fr.pl > fr/tagpending.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/namecheck.fr.pl fr/namecheck.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/namecheck.fr.pl > fr/namecheck.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/desktop2menu.fr.pl fr/desktop2menu.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/desktop2menu.fr.pl > fr/desktop2menu.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/svnpath.fr.pl fr/svnpath.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/svnpath.fr.pl > fr/svnpath.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/sadt.fr.pod fr/sadt.fr.pod pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/sadt.fr.pod > fr/sadt.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/build-rdeps.fr.pl fr/build-rdeps.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/build-rdeps.fr.pl > fr/build-rdeps.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/mass-bug.fr.pl fr/mass-bug.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/mass-bug.fr.pl > fr/mass-bug.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/mk-build-deps.fr.pl fr/mk-build-deps.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/mk-build-deps.fr.pl > fr/mk-build-deps.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/rmadison.fr.pl fr/rmadison.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/rmadison.fr.pl > fr/rmadison.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/chdist.fr.pl fr/chdist.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/chdist.fr.pl > fr/chdist.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/mk-origtargz.fr.pl fr/mk-origtargz.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/mk-origtargz.fr.pl > fr/mk-origtargz.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/dget.fr.pl fr/dget.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/dget.fr.pl > fr/dget.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/debcommit.fr.pl fr/debcommit.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/debcommit.fr.pl > fr/debcommit.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/debcheckout.fr.pl fr/debcheckout.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/debcheckout.fr.pl > fr/debcheckout.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/bts.fr.pl fr/bts.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/bts.fr.pl > fr/bts.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/who-permits-upload.fr.pl fr/who-permits-upload.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/who-permits-upload.fr.pl > fr/who-permits-upload.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/transition-check.fr.pl fr/transition-check.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/transition-check.fr.pl > fr/transition-check.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/origtargz.fr.pl fr/origtargz.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/origtargz.fr.pl > fr/origtargz.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/git-deborig.fr.pl fr/git-deborig.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/git-deborig.fr.pl > fr/git-deborig.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/build-rdeps.de.pl de/build-rdeps.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/build-rdeps.de.pl > de/build-rdeps.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/desktop2menu.de.pl de/desktop2menu.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/desktop2menu.de.pl > de/desktop2menu.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/chdist.de.pl de/chdist.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/chdist.de.pl > de/chdist.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/mass-bug.de.pl de/mass-bug.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/mass-bug.de.pl > de/mass-bug.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' xsltproc --nonet -o fr/deb-reversion.fr.1 \ /usr/share/sgml/docbook/xsl-stylesheets-1.79.2/manpages/docbook.xsl fr/deb-reversion.fr.dbk Note: meta source : no *info/productname or alternative deb-reversion Note: meta source : see http://www.docbook.org/tdg5/en/html/produ deb-reversion Note: meta source : no refentry/refmeta/refmiscinfo@class=source deb-reversion Note: meta source : see http://www.docbook.org/tdg5/en/html/refmi deb-reversion Note: meta version: no *info/productnumber or alternative deb-reversion Note: meta version: see http://www.docbook.org/tdg5/en/html/produ deb-reversion Note: meta version: no refentry/refmeta/refmiscinfo@class=version deb-reversion Note: meta version: see http://www.docbook.org/tdg5/en/html/refmi deb-reversion Warn: meta source : no fallback for source, so inserted a fixme deb-reversion Note: meta manual : no titled ancestor of refentry deb-reversion Note: meta manual : no refentry/refmeta/refmiscinfo@class=manual deb-reversion Note: meta manual : see http://www.docbook.org/tdg5/en/html/refmi deb-reversion Warn: meta manual : no fallback for manual, so inserted a fixme deb-reversion Warn: meta author : no refentry/info/author deb-reversion Note: meta author : see http://www.docbook.org/tdg5/en/html/autho deb-reversion Warn: meta author : no author data, so inserted a fixme deb-reversion Note: Writing deb-reversion.1 mv fr/deb-reversion.1 fr/deb-reversion.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/debcheckout.de.pl de/debcheckout.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/debcheckout.de.pl > de/debcheckout.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker fr/hardening-check.fr.pl fr/hardening-check.fr.pl pod syntax OK. pod2man --utf8 --center=" " --release="Utilitaires Debian" fr/hardening-check.fr.pl > fr/hardening-check.fr.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/debcommit.de.pl de/debcommit.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/debcommit.de.pl > de/debcommit.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/dget.de.pl de/dget.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/dget.de.pl > de/dget.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' xsltproc --nonet -o de/deb-reversion.de.1 \ /usr/share/sgml/docbook/xsl-stylesheets-1.79.2/manpages/docbook.xsl de/deb-reversion.de.dbk Note: meta source : no *info/productname or alternative deb-reversion Note: meta source : see http://www.docbook.org/tdg5/en/html/produ deb-reversion Note: meta source : no refentry/refmeta/refmiscinfo@class=source deb-reversion Note: meta source : see http://www.docbook.org/tdg5/en/html/refmi deb-reversion Note: meta version: no *info/productnumber or alternative deb-reversion Note: meta version: see http://www.docbook.org/tdg5/en/html/produ deb-reversion Note: meta version: no refentry/refmeta/refmiscinfo@class=version deb-reversion Note: meta version: see http://www.docbook.org/tdg5/en/html/refmi deb-reversion Warn: meta source : no fallback for source, so inserted a fixme deb-reversion Note: meta manual : no titled ancestor of refentry deb-reversion Note: meta manual : no refentry/refmeta/refmiscinfo@class=manual deb-reversion Note: meta manual : see http://www.docbook.org/tdg5/en/html/refmi deb-reversion Warn: meta manual : no fallback for manual, so inserted a fixme deb-reversion Warn: meta author : no refentry/info/author deb-reversion Note: meta author : see http://www.docbook.org/tdg5/en/html/autho deb-reversion Warn: meta author : no author data, so inserted a fixme deb-reversion Note: Writing deb-reversion.1 mv de/deb-reversion.1 de/deb-reversion.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/mk-build-deps.de.pl de/mk-build-deps.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/mk-build-deps.de.pl > de/mk-build-deps.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/bts.de.pl de/bts.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/bts.de.pl > de/bts.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/sadt.de.pod de/sadt.de.pod pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/sadt.de.pod > de/sadt.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/namecheck.de.pl de/namecheck.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/namecheck.de.pl > de/namecheck.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/rmadison.de.pl de/rmadison.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/rmadison.de.pl > de/rmadison.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/svnpath.de.pl de/svnpath.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/svnpath.de.pl > de/svnpath.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/tagpending.de.pl de/tagpending.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/tagpending.de.pl > de/tagpending.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/mk-origtargz.de.pl de/mk-origtargz.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/mk-origtargz.de.pl > de/mk-origtargz.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/who-permits-upload.de.pl de/who-permits-upload.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/who-permits-upload.de.pl > de/who-permits-upload.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/transition-check.de.pl de/transition-check.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/transition-check.de.pl > de/transition-check.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/origtargz.de.pl de/origtargz.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/origtargz.de.pl > de/origtargz.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/git-deborig.de.pl de/git-deborig.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/git-deborig.de.pl > de/git-deborig.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' podchecker de/hardening-check.de.pl de/hardening-check.de.pl pod syntax OK. pod2man --utf8 --center=" " --release="Debian-Hilfswerkzeuge" de/hardening-check.de.pl > de/hardening-check.de.1 make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/hardening-check-2.20.2-build/devscripts-2.20.2/po4a' touch translated_manpages error: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.To4KEi (%build) RPM build errors: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.To4KEi (%build) I: [iurt_root_command] ERROR: chroot