D: [iurt_root_command] chroot
Building target platforms: noarch
Building for target noarch
warning: /home/pterjan/rpmbuild/SPECS/golang-github-urfave-cli-2.spec line 40: autopatch: no matching patches in range
Installing /home/pterjan/rpmbuild/SRPMS/golang-github-urfave-cli-2-2.27.1-1.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.vFtdlR
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ErGOaE
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ rm -rf cli-2.27.1
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/cli-2.27.1.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd cli-2.27.1
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ rm -fr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/vendor
+ [[ ! -e /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/bin ]]
+ install -m 0755 -vd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/bin
install: creating directory '/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build'
install: creating directory '/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/bin'
+ export GOPATH=/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build:/usr/share/gocode
+ GOPATH=/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build:/usr/share/gocode
+ [[ ! -e /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli/v2 ]]
++ dirname /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli/v2
+ install -m 0755 -vd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli
install: creating directory '/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src'
install: creating directory '/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com'
install: creating directory '/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave'
install: creating directory '/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli'
+ ln -fs /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1 /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli/v2
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli/v2
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.2Pw1tr
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ mkdir /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT
+ cd cli-2.27.1
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src/github.com/urfave/cli/v2
+ IFS=
+ gosupfiles=
+ mapfile -t gosupfilesA
+ go-rpm-integration install -i github.com/urfave/cli/v2 -b /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/bin -s /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build -o golang-github-urfave-cli-2-devel.file-list -O /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1 -V 2.27.1-1.mga10 -p /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT -g /usr/share/gocode -r '.*example.*'
Installing: github.com/urfave/cli/v2
+ IFS=
+++ realpath -e --relative-base=. docs CODE_OF_CONDUCT.md README.md godoc-current.txt mkdocs-reqs.txt cmd/urfave-cli-genflags/README.md
+++ sort -u
++ listfiles_include='CODE_OF_CONDUCT.md
README.md
cmd/urfave-cli-genflags/README.md
docs
godoc-current.txt
mkdocs-reqs.txt'
++ echo 'CODE_OF_CONDUCT.md
README.md
cmd/urfave-cli-genflags/README.md
docs
godoc-current.txt
mkdocs-reqs.txt'
+ godocs='CODE_OF_CONDUCT.md
README.md
cmd/urfave-cli-genflags/README.md
docs
godoc-current.txt
mkdocs-reqs.txt'
+ [[ -n CODE_OF_CONDUCT.md
README.md
cmd/urfave-cli-genflags/README.md
docs
godoc-current.txt
mkdocs-reqs.txt ]]
+ IFS=
+ read -r f
+ echo %doc '"CODE_OF_CONDUCT.md"'
+ IFS=
+ read -r f
+ echo %doc '"README.md"'
+ IFS=
+ read -r f
+ echo %doc '"cmd/urfave-cli-genflags/README.md"'
+ IFS=
+ read -r f
+ echo %doc '"docs"'
+ IFS=
+ read -r f
+ echo %doc '"godoc-current.txt"'
+ IFS=
+ read -r f
+ echo %doc '"mkdocs-reqs.txt"'
+ IFS=
+ read -r f
+ IFS=
+++ sort -u
+++ realpath -e --relative-base=. LICENSE
++ listfiles_include=LICENSE
++ echo LICENSE
+ golicenses=LICENSE
+ [[ -n LICENSE ]]
+ IFS=
+ read -r f
+ echo %license '"LICENSE"'
+ IFS=
+ read -r f
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.cHyrfA
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ cd cli-2.27.1
+ '[' 1 -eq 1 ']'
+ for test in "TestToMan" "TestToManWithSection"
++ grep -rl TestToMan
+ awk -i inplace '/^func.*TestToMan\(/ { print; print "\tt.Skip(\"disabled failing test\")"; next}1' docs_test.go
+ for test in "TestToMan" "TestToManWithSection"
++ grep -rl TestToManWithSection
+ awk -i inplace '/^func.*TestToManWithSection\(/ { print; print "\tt.Skip(\"disabled failing test\")"; next}1' docs_test.go
+ GO_LDFLAGS=' -X github.com/urfave/cli/v2/version=2.27.1'
+ GO_TEST_FLAGS='-buildmode pie -compiler gc'
+ GO_TEST_EXT_LD_FLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld '
+ go-rpm-integration check -i github.com/urfave/cli/v2 -b /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/bin -s /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build -V 2.27.1-1.mga10 -p /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT -g /usr/share/gocode -r '.*example.*'
Testing    in: /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/src
         PATH: /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/home/pterjan/.local/bin:/home/pterjan/bin
       GOPATH: /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/_build:/usr/share/gocode
  GO111MODULE: off
      command: go test -buildmode pie -compiler gc -ldflags " -X github.com/urfave/cli/v2/version=2.27.1 -extldflags '-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld '"
      testing: github.com/urfave/cli/v2
github.com/urfave/cli/v2
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar command [command options] 

COMMANDS:
   jimbob, j  
   carly      
   help, h    Shows a list of commands or help for one command

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar carly

USAGE:
   v2.test foobar carly [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar command [command options] 

COMMANDS:
   jimbob, j  
   carly      
   help, h    Shows a list of commands or help for one command

OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --epflag                 ext package flag usage (default: 2)
   --help, -h               show help
Incorrect Usage: flag provided but not defined: -epflag

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   sub      
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --opt value  
   --help, -h   show help
*cli.stringGeneric 1
*cli.stringGeneric 
NAME:
   p1 - A new cli application

USAGE:
   p1 [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   p2 - A new cli application

USAGE:
   p2 [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   p3 - A new cli application

USAGE:
   p3 [global options] command [command options] 

COMMANDS:
   sub1     
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   p6 - A new cli application

USAGE:
   p6 [global options] command [command options] 

COMMANDS:
   sub1     
   sub2     
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   nested-0 sub1

USAGE:
   nested-0 sub1 command [command options] 

COMMANDS:
   sub1_a   
   sub1_b   
   help, h  Shows a list of commands or help for one command

OPTIONS:
   --help, -h  show help
Incorrect Usage: could not parse "foobar" as float64 value from environment variable "APP_UNPARSABLE" for flag unparsable: strconv.ParseFloat: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --timeout value, -t value     (default: 15.5) [$APP_TIMEOUT_SECONDS]
   --password value, -p value     [$APP_PASSWORD]
   --unparsable value, -u value  (default: 0) [$APP_UNPARSABLE]
   --no-env-var value, -n value  (default: 0)
   --help, -h                    show help
Incorrect Usage: Cannot use two forms of the same flag: W wat

NAME:
   foo - A new cli application

USAGE:
   foo [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --wat, -W, --huh  (default: false)
   --help, -h        show help
NAME:
   foo - A new cli application

USAGE:
   foo [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --wat, -W, --huh  (default: false)
   --help, -h        show help
Incorrect Usage: could not parse "foobar" as bool value from environment variable "DEBUG" for flag debug: strconv.ParseBool: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --debug     (default: false) [$DEBUG]
   --help, -h  show help
Incorrect Usage: could not parse "foobar" as duration value from environment variable "TIME" for flag time: time: invalid duration "foobar"

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --time value  (default: 0s) [$TIME]
   --help, -h    show help
Incorrect Usage: could not parse "foobar" as float64 value from environment variable "SECONDS" for flag seconds: strconv.ParseFloat: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "08" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "08": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as float64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseFloat: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as int slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as int slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as uint slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as uint slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as int64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as int64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as uint64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as uint64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "08" as uint value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "08": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as uint value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as uint value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "08" as uint64 value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "08": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as uint64 value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as uint64 value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --some-timestamp-flag value   [$SOME_TIMESTAMP_FLAG]
   --help, -h                   show help
PASS
ok  	github.com/urfave/cli/v2	0.103s
github.com/urfave/cli/v2
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar command [command options] 

COMMANDS:
   jimbob, j  
   carly      
   help, h    Shows a list of commands or help for one command

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar carly

USAGE:
   v2.test foobar carly [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar command [command options] 

COMMANDS:
   jimbob, j  
   carly      
   help, h    Shows a list of commands or help for one command

OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test batbaz

USAGE:
   v2.test batbaz [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test foobar

USAGE:
   v2.test foobar [command options] [arguments...]

OPTIONS:
   --help, -h  show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   foobar, f  
   batbaz, b  
   help, h    Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --epflag                 ext package flag usage (default: 2)
   --help, -h               show help
Incorrect Usage: flag provided but not defined: -epflag

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --carly value, -c value  
   --jimbob, -j             (default: true)
   --help, -h               show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   sub      
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --opt value  
   --help, -h   show help
*cli.stringGeneric 1
*cli.stringGeneric 
NAME:
   p1 - A new cli application

USAGE:
   p1 [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   p2 - A new cli application

USAGE:
   p2 [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   p3 - A new cli application

USAGE:
   p3 [global options] command [command options] 

COMMANDS:
   sub1     
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   p6 - A new cli application

USAGE:
   p6 [global options] command [command options] 

COMMANDS:
   sub1     
   sub2     
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --help, -h  show help
NAME:
   nested-0 sub1

USAGE:
   nested-0 sub1 command [command options] 

COMMANDS:
   sub1_a   
   sub1_b   
   help, h  Shows a list of commands or help for one command

OPTIONS:
   --help, -h  show help
Incorrect Usage: could not parse "foobar" as float64 value from environment variable "APP_UNPARSABLE" for flag unparsable: strconv.ParseFloat: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --timeout value, -t value     (default: 15.5) [$APP_TIMEOUT_SECONDS]
   --password value, -p value     [$APP_PASSWORD]
   --unparsable value, -u value  (default: 0) [$APP_UNPARSABLE]
   --no-env-var value, -n value  (default: 0)
   --help, -h                    show help
Incorrect Usage: Cannot use two forms of the same flag: W wat

NAME:
   foo - A new cli application

USAGE:
   foo [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --wat, -W, --huh  (default: false)
   --help, -h        show help
NAME:
   foo - A new cli application

USAGE:
   foo [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --wat, -W, --huh  (default: false)
   --help, -h        show help
Incorrect Usage: could not parse "foobar" as bool value from environment variable "DEBUG" for flag debug: strconv.ParseBool: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --debug     (default: false) [$DEBUG]
   --help, -h  show help
Incorrect Usage: could not parse "foobar" as duration value from environment variable "TIME" for flag time: time: invalid duration "foobar"

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --time value  (default: 0s) [$TIME]
   --help, -h    show help
Incorrect Usage: could not parse "foobar" as float64 value from environment variable "SECONDS" for flag seconds: strconv.ParseFloat: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "08" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "08": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as int value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as float64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseFloat: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as int slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as int slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as uint slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as uint slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as int64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as int64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseInt: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "1.2,2" as uint64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "foobar" as uint64 slice value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value [ --seconds value ]   [$SECONDS]
   --help, -h                           show help
Incorrect Usage: could not parse "08" as uint value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "08": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as uint value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as uint value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "08" as uint64 value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "08": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "1.2" as uint64 value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "1.2": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
Incorrect Usage: could not parse "foobar" as uint64 value from environment variable "SECONDS" for flag seconds: strconv.ParseUint: parsing "foobar": invalid syntax

NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --seconds value  (default: 0) [$SECONDS]
   --help, -h       show help
NAME:
   v2.test - A new cli application

USAGE:
   v2.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --some-timestamp-flag value   [$SOME_TIMESTAMP_FLAG]
   --help, -h                   show help
PASS
ok  	github.com/urfave/cli/v2	0.148s
github.com/urfave/cli/v2/altsrc
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value      
   --top.test value  (default: 0)
   --help, -h        show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value      
   --top.test value  (default: 0)
   --help, -h        show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value      
   --top.test value  (default: 0)
   --help, -h        show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
PASS
ok  	github.com/urfave/cli/v2/altsrc	0.052s
github.com/urfave/cli/v2/altsrc
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value      
   --top.test value  (default: 0)
   --help, -h        show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value      
   --top.test value  (default: 0)
   --help, -h        show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value      
   --top.test value  (default: 0)
   --help, -h        show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
NAME:
   altsrc.test - A new cli application

USAGE:
   altsrc.test [global options] command [command options] 

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --conf value  
   --test value  (default: 0)
   --help, -h    show help
PASS
ok  	github.com/urfave/cli/v2/altsrc	0.147s
github.com/urfave/cli/v2/cmd/urfave-cli-genflags
PASS
ok  	github.com/urfave/cli/v2/cmd/urfave-cli-genflags	0.004s
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: golang-github-urfave-cli-2-devel-2.27.1-1.mga10.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.co9cWA
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ cd cli-2.27.1
+ DOCDIR=/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/CODE_OF_CONDUCT.md /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/README.md /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/cmd/urfave-cli-genflags/README.md /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/docs /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/godoc-current.txt /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/mkdocs-reqs.txt /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/doc/golang-github-urfave-cli-2-devel
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%license): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.wUbmn6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ cd cli-2.27.1
+ LICENSEDIR=/home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/licenses/golang-github-urfave-cli-2-devel
+ export LC_ALL=C
+ LC_ALL=C
+ export LICENSEDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/licenses/golang-github-urfave-cli-2-devel
+ cp -pr /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/cli-2.27.1/LICENSE /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT/usr/share/licenses/golang-github-urfave-cli-2-devel
+ RPM_EC=0
++ jobs -p
+ exit 0
warning: File listed twice: /usr/share/doc/golang-github-urfave-cli-2-devel/README.md
grep: warning: stray \ before :
grep: warning: stray \ before :
grep: warning: stray \ before :
grep: warning: stray \ before :
grep: warning: stray \ before :
grep: warning: stray \ before :
grep: warning: stray \ before :
grep: warning: stray \ before :
Provides: golang(github.com/urfave/cli/v2) = 2.27.1-1.mga10 golang(github.com/urfave/cli/v2/altsrc) = 2.27.1-1.mga10 golang-github-urfave-cli-2-devel = 2.27.1-1.mga10 golang-ipath(github.com/urfave/cli/v2) = 2.27.1-1.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: go-filesystem golang(github.com/BurntSushi/toml) golang(github.com/cpuguy83/go-md2man/v2/md2man) golang(github.com/xrash/smetrics) golang(golang.org/x/text/cases) golang(golang.org/x/text/language) golang(gopkg.in/yaml.v3)
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build/BUILDROOT
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/golang-github-urfave-cli-2-devel-2.27.1-1.mga10.noarch.rpm
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.SL1iwm
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ test -d /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ rm -rf /home/pterjan/rpmbuild/BUILD/golang-github-urfave-cli-2-2.27.1-build
+ RPM_EC=0
++ jobs -p
+ exit 0

RPM build warnings:
    /home/pterjan/rpmbuild/SPECS/golang-github-urfave-cli-2.spec line 40: autopatch: no matching patches in range
    File listed twice: /usr/share/doc/golang-github-urfave-cli-2-devel/README.md
D: [iurt_root_command] Success!