D: [iurt_root_command] chroot Building target platforms: x86_64 Building for target x86_64 Installing /home/pterjan/rpmbuild/SRPMS/flam3-3.1.1-7.mga10.src.rpm Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.UqikwP Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ZM54JN + umask 022 + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + rm -rf flam3-3.1.1 + /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/flam3-3.1.1.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd flam3-3.1.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/flam3-3.1.1-linking.patch + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.5YJc2c + umask 022 + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd flam3-3.1.1 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + autoreconf -vfi autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: running: aclocal --force -I m4 autoreconf: running: /usr/bin/autoconf --force configure.ac:5: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:5: You should use the 'AC_CONFIG_HEADERS' macro instead. aclocal.m4:707: AM_CONFIG_HEADER is expanded from... configure.ac:5: the top level configure.ac:8: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:429: AM_INIT_AUTOMAKE is expanded from... configure.ac:8: the top level configure.ac:21: warning: The macro 'AM_DISABLE_SHARED' is obsolete. configure.ac:21: You should run autoupdate. m4/ltoptions.m4:206: AM_DISABLE_SHARED is expanded from... configure.ac:21: the top level configure.ac:22: warning: The macro 'AC_PROG_LIBTOOL' is obsolete. configure.ac:22: You should run autoupdate. m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... configure.ac:22: the top level configure.ac:23: warning: The macro 'AC_HEADER_STDC' is obsolete. configure.ac:23: You should run autoupdate. ./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from... configure.ac:23: the top level configure.ac:26: warning: The macro 'AC_HEADER_TIME' is obsolete. configure.ac:26: You should run autoupdate. ./lib/autoconf/headers.m4:702: AC_HEADER_TIME is expanded from... configure.ac:26: the top level configure.ac:39: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... configure.ac:39: the top level configure.ac:53: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... configure.ac:53: the top level configure.ac:81: warning: AC_OUTPUT should be used without arguments. configure.ac:81: You should run autoupdate. autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:8: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:8: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.ac:15: installing './compile' configure.ac:8: installing './missing' autoreconf: Leaving directory '.' + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + CONFIGURE_TOP=. + '[' 1 = 1 ']' ++ find . -name config.guess -o -name config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./config.sub + /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html) + /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool Modifying ltmain.sh underlinking for plugins (cf http://wiki.mandriva.com/en/Underlinking) + /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking Fixing libtool's ltmain.sh to prevent overlinking (cf http://wiki.mandriva.com/en/Overlinking) + /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs . + /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64 + ./configure --host=x86_64-mageia-linux-gnu --build=x86_64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --includedir=/usr/include/flam3 --enable-shared --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether sleep supports fractional seconds... yes checking filesystem timestamp resolution... 0.01 checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking xargs -n works... yes checking for x86_64-mageia-linux-gnu-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking whether make sets $(MAKE)... (cached) yes checking build system type... x86_64-mageia-linux-gnu checking host system type... x86_64-mageia-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-mageia-linux-gnu file names to x86_64-mageia-linux-gnu format... func_convert_file_noop checking how to convert x86_64-mageia-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for x86_64-mageia-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for x86_64-mageia-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-mageia-linux-gnu-ranlib... no checking for ranlib... ranlib checking for x86_64-mageia-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for x86_64-mageia-linux-gnu-strip... no checking for strip... strip checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for x86_64-mageia-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for egrep... (cached) /usr/bin/grep -E checking for an ANSI C-conforming const... yes checking for size_t... yes checking for deflateInit_ in -lz... yes checking for png_write_image in -lpng... yes checking for xmlParseFile in -lxml2... yes checking whether gcc knows 32-bit __sync_bool_compare_and_swap()... yes checking whether gcc knows 64-bit __sync_bool_compare_and_swap()... yes checking for pthread_create in -lpthread... yes checking for jpeg_start_compress in -ljpeg... yes checking for xml2-config... /usr/bin/xml2-config checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating flam3.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + /usr/bin/make -O -j16 V=1 VERBOSE=1 /usr/bin/make all-am make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o docstring.o docstring.c make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o filters.lo filters.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c filters.c -fPIC -DPIC -o .libs/filters.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o flam3-render.o flam3-render.c make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o flam3-convert.o flam3-convert.c make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o flam3-animate.o flam3-animate.c make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o isaac.lo isaac.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c isaac.c -fPIC -DPIC -o .libs/isaac.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o jpeg.lo jpeg.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c jpeg.c -fPIC -DPIC -o .libs/jpeg.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o png.lo png.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c png.c -fPIC -DPIC -o .libs/png.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o palettes.lo palettes.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c palettes.c -fPIC -DPIC -o .libs/palettes.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o flam3-genome.o flam3-genome.c flam3-genome.c: In function 'main': flam3-genome.c:1016:71: warning: '%s' directive output may be truncated writing up to 64 bytes into a region of size between 50 and 59 [-Wformat-truncation=] 1016 | snprintf(cp_orig.flame_name, flam3_name_len, "%d of %s x %s", | ^~ In file included from /usr/include/stdio.h:970, from flam3.h:23, from private.h:22, from flam3-genome.c:19: In function 'snprintf', inlined from 'main' at flam3-genome.c:1016:19: /usr/include/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 9 and 146 bytes into a destination of size 64 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ flam3-genome.c: In function 'main': flam3-genome.c:981:80: warning: '%s' directive output may be truncated writing up to 64 bytes into a region of size between 41 and 50 [-Wformat-truncation=] 981 | snprintf(cp_orig.flame_name, flam3_name_len, "mutation %d of %s", rep, tm); | ^~ ~~ In function 'snprintf', inlined from 'main' at flam3-genome.c:981:19: /usr/include/bits/stdio2.h:68:10: note: '__builtin___snprintf_chk' output between 15 and 88 bytes into a destination of size 64 68 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 69 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 70 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o variations.lo variations.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c variations.c -fPIC -DPIC -o .libs/variations.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o parser.lo parser.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c parser.c -fPIC -DPIC -o .libs/parser.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o interpolation.lo interpolation.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c interpolation.c -fPIC -DPIC -o .libs/interpolation.o make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c -o flam3.lo flam3.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I/usr/include/libxml2 -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -c flam3.c -fPIC -DPIC -o .libs/flam3.o flam3.c: In function 'flam3_cross': flam3.c:2730:24: warning: '%7.5g' directive writing between 7 and 12 bytes into a region of size 10 [-Wformat-overflow=] 2730 | sprintf(ministr,"%7.5g",t); | ^~~~~ flam3.c:2730:23: note: assuming directive output of 11 bytes 2730 | sprintf(ministr,"%7.5g",t); | ^~~~~~~ In file included from /usr/include/stdio.h:970, from flam3.h:23, from private.h:22, from flam3.c:23: In function 'sprintf', inlined from 'flam3_cross' at flam3.c:2730:7: /usr/include/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output between 8 and 13 bytes into a destination of size 10 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libflam3.la -rpath /usr/lib64 flam3.lo filters.lo parser.lo variations.lo interpolation.lo palettes.lo jpeg.lo png.lo isaac.lo -lm -ljpeg -lpng -lz -lpthread -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: gcc -shared -Wl,--as-needed -fPIC -DPIC .libs/flam3.o .libs/filters.o .libs/parser.o .libs/variations.o .libs/interpolation.o .libs/palettes.o .libs/jpeg.o .libs/png.o .libs/isaac.o -g -O3 -O2 -g -Werror=format-security -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -lm -ljpeg -lpthread -lxml2 -lpng -lz -Wl,-soname -Wl,libflam3.so.0 -o .libs/libflam3.so.0.0.0 libtool: link: (cd ".libs" && rm -f "libflam3.so.0" && ln -s "libflam3.so.0.0.0" "libflam3.so.0") libtool: link: (cd ".libs" && rm -f "libflam3.so" && ln -s "libflam3.so.0.0.0" "libflam3.so") libtool: link: ( cd ".libs" && rm -f "libflam3.la" && ln -s "../libflam3.la" "libflam3.la" ) make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o flam3-animate flam3-animate.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/flam3-animate flam3-animate.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o flam3-render flam3-render.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/flam3-render flam3-render.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o flam3-convert flam3-convert.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/flam3-convert flam3-convert.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' make[1]: git: No such file or directory /bin/sh ./libtool --tag=CC --mode=link gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -D'GIT_REV=""' -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o flam3-genome flam3-genome.o docstring.o libflam3.la -lm -ljpeg -lpthread -lxml2 -lpng -lz libtool: link: gcc -g -O3 -std=gnu99 -ffast-math -DPACKAGE_DATA_DIR=\"/usr/share/flam3\" -DGIT_REV=\"\" -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/flam3-genome flam3-genome.o docstring.o ./.libs/libflam3.so -lm -ljpeg -lpthread -lxml2 -lpng -lz make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.6DvEkp + umask 022 + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + '[' 1 -eq 1 ']' + '[' /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT '!=' / ']' + rm -rf /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT ++ dirname /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT + mkdir -p /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + mkdir /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd flam3-3.1.1 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT 'INSTALL=/usr/bin/install -p' make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64' /bin/sh ./libtool --mode=install /usr/bin/install -p libflam3.la '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64' libtool: install: /usr/bin/install -p .libs/libflam3.so.0.0.0 /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64/libflam3.so.0.0.0 libtool: install: (cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64 && { ln -s -f libflam3.so.0.0.0 libflam3.so.0 || { rm -f libflam3.so.0 && ln -s libflam3.so.0.0.0 libflam3.so.0; }; }) libtool: install: (cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64 && { ln -s -f libflam3.so.0.0.0 libflam3.so || { rm -f libflam3.so && ln -s libflam3.so.0.0.0 libflam3.so; }; }) libtool: install: /usr/bin/install -p .libs/libflam3.lai /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64/libflam3.la libtool: warning: remember to run 'libtool --finish /usr/lib64' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -p flam3-animate flam3-genome flam3-render flam3-convert '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin' libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-animate /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-animate libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-genome /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-genome libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-render /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-render libtool: warning: 'libflam3.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -p .libs/flam3-convert /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-convert /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/include/flam3' /usr/bin/install -p -m 644 flam3.h isaac.h isaacs.h rect.c '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/include/flam3' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/man/man1' /usr/bin/install -p -m 644 'flam3-animate.man' '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/man/man1/flam3-animate.1' /usr/bin/install -p -m 644 'flam3-genome.man' '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/man/man1/flam3-genome.1' /usr/bin/install -p -m 644 'flam3-render.man' '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/man/man1/flam3-render.1' /usr/bin/install -p -m 644 'flam3-convert.man' '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/man/man1/flam3-convert.1' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64/pkgconfig' /usr/bin/install -p -m 644 flam3.pc '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/lib64/pkgconfig' /usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/flam3' /usr/bin/install -p -m 644 flam3-palettes.xml '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/flam3' make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1' + find /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT -name '*.la' -delete + chrpath --delete /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-animate /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-convert /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-genome /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/bin/flam3-render + /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 3.1.1-7.mga10 --unique-debug-suffix -3.1.1-7.mga10.x86_64 --unique-debug-src-base flam3-3.1.1-7.mga10.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1 find-debuginfo: starting Extracting debug info from 5 files DWARF-compressing 5 files sepdebugcrcfix: Updated 5 CRC32s, 0 CRC32s did match. Creating .debug symlinks for symlinks to ELF files Copying sources found by 'debugedit -l' to /usr/src/debug/flam3-3.1.1-7.mga10.x86_64 find-debuginfo: done + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs *** WARNING: ./usr/src/debug/flam3-3.1.1-7.mga10.x86_64/png.c is executable but has no shebang, removing executable bit + env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16 + /usr/lib/rpm/redhat/brp-python-hardlink Reading /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/SPECPARTS/rpm-debuginfo.specpart Processing files: flam3-3.1.1-7.mga10.x86_64 Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.9iOaAY + umask 022 + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + cd flam3-3.1.1 + DOCDIR=/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/doc/flam3 + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/doc/flam3 + cp -pr /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1/README.txt /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/doc/flam3 + RPM_EC=0 ++ jobs -p + exit 0 Provides: flam3 = 3.1.1-7.mga10 flam3(x86-64) = 3.1.1-7.mga10 libflam3.so.0()(64bit) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.11)(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.38)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libflam3.so.0()(64bit) libjpeg.so.8()(64bit) libjpeg.so.8(LIBJPEG_8.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.2.5)(64bit) libm.so.6(GLIBC_2.29)(64bit) libmvec.so.1()(64bit) libmvec.so.1(GLIBC_2.22)(64bit) libmvec.so.1(GLIBC_2.35)(64bit) libpng16.so.16()(64bit) libpng16.so.16(PNG16_0)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) Processing files: flam3-devel-3.1.1-7.mga10.x86_64 Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.zlgIXj + umask 022 + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + cd flam3-3.1.1 + DOCDIR=/home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/doc/flam3-devel + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/doc/flam3-devel + cp -pr /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/flam3-3.1.1/README.txt /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT/usr/share/doc/flam3-devel + RPM_EC=0 ++ jobs -p + exit 0 Provides: devel(libflam3(64bit)) flam3-devel = 3.1.1-7.mga10 flam3-devel(x86-64) = 3.1.1-7.mga10 pkgconfig(flam3) = 3.1.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: devel(libjpeg(64bit)) devel(libm(64bit)) devel(libmvec(64bit)) devel(libpng16(64bit)) devel(libxml2(64bit)) pkgconfig pkgconfig(libpng) >= 1.0 pkgconfig(libxml-2.0) Processing files: flam3-debugsource-3.1.1-7.mga10.x86_64 Provides: flam3-debugsource = 3.1.1-7.mga10 flam3-debugsource(x86-64) = 3.1.1-7.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: flam3-debuginfo-3.1.1-7.mga10.x86_64 Provides: debuginfo(build-id) = 0078029d65798e66b4647ec2f5cc92aa9e7ea3b5 debuginfo(build-id) = 405b4d1dceda5ce01639148f88189877e67d9a71 debuginfo(build-id) = 72340e9f3cef7cd4e8d801810871f5423feeb8b7 debuginfo(build-id) = 79d9b7f060288cd1eb244fb1b13c1cc37ec78e83 debuginfo(build-id) = 8c502ab4b7d0fc523849f4cde5f3a456a80d53d2 flam3-debuginfo = 3.1.1-7.mga10 flam3-debuginfo(x86-64) = 3.1.1-7.mga10 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: flam3-debugsource(x86-64) = 3.1.1-7.mga10 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build/BUILDROOT Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/flam3-devel-3.1.1-7.mga10.x86_64.rpm Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/flam3-debuginfo-3.1.1-7.mga10.x86_64.rpm Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/flam3-debugsource-3.1.1-7.mga10.x86_64.rpm Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/flam3-3.1.1-7.mga10.x86_64.rpm Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.NbGtT3 + umask 022 + cd /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + test -d /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + rm -rf /home/pterjan/rpmbuild/BUILD/flam3-3.1.1-build + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!