D: [iurt_root_command] chroot
Building target platforms: noarch
Building for target noarch
Installing /home/pterjan/rpmbuild/SRPMS/perl-Unicode-EastAsianWidth-12.0.0-3.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.xUgbH6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Fk0tx0
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ rm -rf Unicode-EastAsianWidth-12.0
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/Unicode-EastAsianWidth-12.0.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Unicode-EastAsianWidth-12.0
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.x3gtXK
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ cd Unicode-EastAsianWidth-12.0
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
*** Cannot find unicore/EastAsianWidth.txt
*** Using bundled EastAsianWidth table (v12.0.0).
Checking if your kit is complete...
Looks good
Invalid LICENSE value 'cc0' ignored
Generating a Unix-style Makefile
Writing Makefile for Unicode::EastAsianWidth
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
cp lib/Unicode/EastAsianWidth.pm blib/lib/Unicode/EastAsianWidth.pm
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.9aWP3c
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ mkdir /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT
+ cd Unicode-EastAsianWidth-12.0
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/perl5/vendor_perl/Unicode/EastAsianWidth.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/man/man3/Unicode::EastAsianWidth.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ccx3Vv
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ cd Unicode-EastAsianWidth-12.0
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j16 V=1 VERBOSE=1 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.40.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/0-signature.t .. ok
t/1-basic.t ...... ok
All tests successful.
Files=2, Tests=8,  1 wallclock secs ( 0.02 usr +  0.00 sys =  0.02 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Unicode-EastAsianWidth-12.0.0-3.mga10.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.6kF6BK
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ cd Unicode-EastAsianWidth-12.0
+ DOCDIR=/home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/Unicode-EastAsianWidth-12.0/Changes /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/Unicode-EastAsianWidth-12.0/META.yml /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/Unicode-EastAsianWidth-12.0/MYMETA.yml /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/Unicode-EastAsianWidth-12.0/README /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/Unicode-EastAsianWidth-12.0/SIGNATURE /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT/usr/share/doc/perl-Unicode-EastAsianWidth
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Unicode::EastAsianWidth) = 12.0.0 perl-Unicode-EastAsianWidth = 12.0.0-3.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl >= 0:5.006 perl(Exporter) perl(base) perl(strict) perl(vars) perl-base >= 2:5.40.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build/BUILDROOT
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-Unicode-EastAsianWidth-12.0.0-3.mga10.noarch.rpm
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.eHqEvX
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-Unicode-EastAsianWidth-12.0.0-build
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!