D: [iurt_root_command] chroot
Building target platforms: noarch
Building for target noarch
Installing /home/pterjan/rpmbuild/SRPMS/perl-POE-Component-Client-Keepalive-0.272.0-11.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.K8BP5P
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ypqBUH
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ rm -rf POE-Component-Client-Keepalive-0.272
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/POE-Component-Client-Keepalive-0.272.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd POE-Component-Client-Keepalive-0.272
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.snpv5V
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ cd POE-Component-Client-Keepalive-0.272
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for POE::Component::Client::Keepalive
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
cp lib/POE/Component/Client/Keepalive.pm blib/lib/POE/Component/Client/Keepalive.pm
cp lib/POE/Component/Connection/Keepalive.pm blib/lib/POE/Component/Connection/Keepalive.pm
Manifying 2 pod documents
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.bAMoVA
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ mkdir /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT
+ cd POE-Component-Client-Keepalive-0.272
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
Manifying 2 pod documents
Installing /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/perl5/vendor_perl/POE/Component/Client/Keepalive.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/perl5/vendor_perl/POE/Component/Connection/Keepalive.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/man/man3/POE::Component::Client::Keepalive.3pm
Installing /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/man/man3/POE::Component::Connection::Keepalive.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.AmTTND
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ cd POE-Component-Client-Keepalive-0.272
+ '[' 1 -eq 1 ']'
+ make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.40.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing with Perl 5.040000, /usr/bin/perl5.40.0
#     ExtUtils::MakeMaker version is 7.70
#     Net::IP::Minimal version is 0.06
#     POE version is 1.370
#     POE::Component::Resolver version is 0.921
t/000-report-versions.t ... ok
t/01_socket_reuse.t ....... ok
# This test may take a long time if your firewall blackholes connections.
t/02_socket_queue.t ....... ok
t/03_each_queue.t ......... ok
t/04_free_each.t .......... ok
t/05_errors.t ............. ok
t/06_activity.t ........... ok
t/07_keep_alive.t ......... ok
t/08_quick_reuse.t ........ ok
t/09_timeout.t ............ ok
t/10_resolver.t ........... ok
t/11_dead_socket.t ........ ok
t/12_extref.t ............. ok
t/13_close.t .............. ok
t/50_bisbee_timeout.t ..... ok
t/51_reiss_reuse.t ........ ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=18, Tests=92, 40 wallclock secs ( 0.06 usr  0.01 sys +  2.85 cusr  0.73 csys =  3.65 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-POE-Component-Client-Keepalive-0.272.0-11.mga10.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.66giLc
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ cd POE-Component-Client-Keepalive-0.272
+ DOCDIR=/home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/POE-Component-Client-Keepalive-0.272/CHANGES /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/POE-Component-Client-Keepalive-0.272/LICENSE /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/POE-Component-Client-Keepalive-0.272/META.yml /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/POE-Component-Client-Keepalive-0.272/MYMETA.yml /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/POE-Component-Client-Keepalive-0.272/README /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT/usr/share/doc/perl-POE-Component-Client-Keepalive
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(POE::Component::Client::Keepalive) = 0.272.0 perl(POE::Component::Connection::Keepalive) = 0.272.0 perl-POE-Component-Client-Keepalive = 1:0.272.0-11.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Carp) perl(Errno) perl(Net::IP::Minimal) >= 0.20.0 perl(POE::Component::Connection::Keepalive) perl(POE::Component::Resolver) >= 0.917.0 perl(POE::Wheel::ReadWrite) perl(POE::Wheel::SocketFactory) perl(Socket) perl(bytes) perl(constant) perl(strict) perl(warnings) perl-base >= 2:5.40.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build/BUILDROOT
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-POE-Component-Client-Keepalive-0.272.0-11.mga10.noarch.rpm
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.LcVd9y
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-POE-Component-Client-Keepalive-0.272.0-build
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!