D: [iurt_root_command] chroot
Building target platforms: noarch
Building for target noarch
Installing /home/pterjan/rpmbuild/SRPMS/perl-MLDBM-Sync-0.300.0-10.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.MkZyQW
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.vLOBjH
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ rm -rf MLDBM-Sync-0.30
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/MLDBM-Sync-0.30.tar.bz2
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd MLDBM-Sync-0.30
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.FaHxf1
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ cd MLDBM-Sync-0.30
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Generating a Unix-style Makefile
Writing Makefile for MLDBM::Sync
Writing MYMETA.yml and MYMETA.json
+ make
cp Sync.pm blib/lib/MLDBM/Sync.pm
cp lib/MLDBM/Sync/SDBM_File.pm blib/lib/MLDBM/Sync/SDBM_File.pm
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.HDX5jZ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ mkdir /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT
+ cd MLDBM-Sync-0.30
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/perl5/vendor_perl/MLDBM/Sync.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/perl5/vendor_perl/MLDBM/Sync/SDBM_File.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/man/man3/MLDBM::Sync.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
*** WARNING: ./usr/share/perl5/vendor_perl/MLDBM/Sync.pm is executable but has no shebang, removing executable bit
*** WARNING: ./usr/share/perl5/vendor_perl/MLDBM/Sync/SDBM_File.pm is executable but has no shebang, removing executable bit
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.dRqEbC
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ cd MLDBM-Sync-0.30
+ '[' 1 -eq 1 ']'
+ make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.40.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
skipping test: Tie::Cache not installed; t/cache.t ......... ok
t/general.t ....... ok
t/key_checksum.t .. ok
t/locks.t ......... ok
t/sdbm_big_rec.t .. ok
t/taint.t ......... ok
t/zdone.t ......... ok
All tests successful.
Files=7, Tests=539,  1 wallclock secs ( 0.02 usr  0.02 sys +  0.29 cusr  0.04 csys =  0.37 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-MLDBM-Sync-0.300.0-10.mga10.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Ss8E7n
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ cd MLDBM-Sync-0.30
+ DOCDIR=/home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/doc/perl-MLDBM-Sync
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/doc/perl-MLDBM-Sync
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/MLDBM-Sync-0.30/MANIFEST /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/doc/perl-MLDBM-Sync
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/MLDBM-Sync-0.30/README /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT/usr/share/doc/perl-MLDBM-Sync
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(MLDBM::Sync) = 0.300.0 perl(MLDBM::Sync::SDBM_File) perl-MLDBM-Sync = 0.300.0-10.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Carp) perl(Data::Dumper) perl(Digest::MD5) perl(Fcntl) perl(MLDBM) perl(MLDBM::Sync::SDBM_File) perl(SDBM_File) perl(strict) perl(vars) perl-base >= 2:5.40.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build/BUILDROOT
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-MLDBM-Sync-0.300.0-10.mga10.noarch.rpm
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ZmlHtA
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-MLDBM-Sync-0.300.0-build
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!