D: [iurt_root_command] chroot
Building target platforms: noarch
Building for target noarch
Installing /home/pterjan/rpmbuild/SRPMS/perl-HTTP-Async-0.330.0-6.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.d4WZlU
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.ObtBlb
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ rm -rf HTTP-Async-0.33
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/HTTP-Async-0.33.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd HTTP-Async-0.33
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.bUAbyC
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ cd HTTP-Async-0.33
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for HTTP::Async
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
cp lib/HTTP/Async/Polite.pm blib/lib/HTTP/Async/Polite.pm
cp lib/HTTP/Async.pm blib/lib/HTTP/Async.pm
Manifying 2 pod documents
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.3IeXQS
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ mkdir /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT
+ cd HTTP-Async-0.33
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
Manifying 2 pod documents
Installing /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/perl5/vendor_perl/HTTP/Async.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/perl5/vendor_perl/HTTP/Async/Polite.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/man/man3/HTTP::Async::Polite.3pm
Installing /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/man/man3/HTTP::Async.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.eMnkcD
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ cd HTTP-Async-0.33
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j16 V=1 VERBOSE=1 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.40.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/bad-connections.t ....... ok
t/bad-headers.t ........... ok
t/bad-hosts.t ............. ok
t/cookies.t ............... ok
t/dead-connection.t ....... ok
t/headers.t ............... ok
t/invalid-options.t ....... ok
t/key_aliases.t ........... ok
t/local-addr.t ............ skipped: test requires Sys::HostIP to be installed
t/make-url-absolute.t ..... ok
t/not-modified.t .......... ok
t/peer-addr.t ............. ok
t/pod-coverage.t .......... skipped: Test::Pod::Coverage > 1.00 required
t/pod.t ................... skipped: Test::Pod 1.00 required for testing POD
t/polite.t ................ ok
t/poll-interval.t ......... ok
t/proxy-with-https.t ...... skipped: enable these tests by setting REAL_SERVERS
t/proxy.t ................. ok
t/real-servers.t .......... skipped: enable these tests by setting REAL_SERVERS
t/redirects.t ............. ok
t/release-cpan-changes.t .. skipped: install Test::CPAN::Changes to run this test
t/remove.t ................ ok
t/setup.t ................. ok
t/strip-host-from-uri.t ... ok
t/template.t .............. skipped: just a template to base other tests on
t/timeout.t ............... ok
All tests successful.
Files=26, Tests=189, 47 wallclock secs ( 0.09 usr  0.01 sys +  2.94 cusr  0.37 csys =  3.41 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-HTTP-Async-0.330.0-6.mga10.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.LmVAtH
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ cd HTTP-Async-0.33
+ DOCDIR=/home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/HTTP-Async-0.33/Changes /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/HTTP-Async-0.33/META.json /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/HTTP-Async-0.33/META.yml /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/HTTP-Async-0.33/MYMETA.yml /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ cp -pr /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/HTTP-Async-0.33/TODO /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT/usr/share/doc/perl-HTTP-Async
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(HTTP::Async) = 0.330.0 perl(HTTP::Async::Polite) = 0.330.0 perl-HTTP-Async = 0.330.0-6.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Carp) perl(Data::Dumper) perl(HTTP::Async) perl(HTTP::Request) perl(HTTP::Response) perl(HTTP::Server::Simple::CGI) perl(HTTP::Status) perl(IO::Select) perl(LWP::UserAgent) perl(Net::EmptyPort) perl(Net::HTTP) perl(Net::HTTP::NB) perl(Net::HTTPS::NB) >= 0.130.0 perl(Test::Fatal) perl(Test::HTTP::Server::Simple) perl(Test::More) perl(Time::HiRes) perl(URI) perl(URI::Escape) perl(base) perl(strict) perl(warnings) perl-base >= 2:5.40.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build/BUILDROOT
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/perl-HTTP-Async-0.330.0-6.mga10.noarch.rpm
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.coWQUb
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-HTTP-Async-0.330.0-build
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!