D: [iurt_root_command] chroot
Building target platforms: x86_64
Building for target x86_64
Installing /home/pterjan/rpmbuild/SRPMS/perl-Authen-PAM-0.160.0-31.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.2BzeK6
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.yjsMYl
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ rm -rf Authen-PAM-0.16
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/Authen-PAM-0.16.tar.bz2
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Authen-PAM-0.16
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/Authen-PAM-0.16-Fix-building-on-Perl-without-dot-in-INC.patch
+ /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.zW9vRS
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ cd Authen-PAM-0.16
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for pam header files in... security
checking for pam_getenv... yes
checking if pam_strerror takes a pam_handle_t argument... yes
checking for PAM_AUTHTOKEN_REQD... no
checking for PAM_NEW_AUTHTOK_REQD... yes
checking for PAM_AUTHTOK_EXPIRED... yes
checking for PAM_AUTHTOK_RECOVER... no
checking for PAM_AUTHTOK_RECOVERY... no
checking for PAM_BAD_ITEM... yes
checking for PAM_CONV_AGAIN... yes
checking for PAM_CRED_DELETE... no
checking for PAM_CRED_ESTABLISH... no
checking for PAM_CRED_REFRESH... no
checking for PAM_CRED_REINITIALIZE... no
checking for PAM_DELETE_CRED... yes
checking for PAM_ESTABLISH_CRED... yes
checking for PAM_REFRESH_CRED... yes
checking for PAM_REINITIALIZE_CRED... yes
checking for PAM_INCOMPLETE... yes
checking for PAM_MODULE_UNKNOWN... yes
checking for PAM_RADIO_TYPE... yes
checking for PAM_BINARY_PROMPT... yes
checking whether RTLD_GLOBAL is declared... yes
configure: creating ./config.status
config.status: creating pam.cfg
config.status: creating PAM.pm
config.status: creating PAM_config.h
Generating a Unix-style Makefile
Writing Makefile for Authen::PAM
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
cp PAM.pm blib/lib/Authen/PAM.pm
cp PAM/FAQ.pod blib/lib/Authen/PAM/FAQ.pod
Running Mkbootstrap for PAM ()
chmod 644 "PAM.bs"
"/usr/bin/perl5.40.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- PAM.bs blib/arch/auto/Authen/PAM/PAM.bs 644
"/usr/bin/perl5.40.0" "/usr/share/perl5/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/Authen-PAM-0.16/typemap'  PAM.xs > PAM.xsc
mv PAM.xsc PAM.c
gcc -c  -I. -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"0.16\" -DXS_VERSION=\"0.16\" -fPIC "-I/usr/lib64/perl5/CORE"  -DHAVE_CONFIG_H PAM.c
rm -f blib/arch/auto/Authen/PAM/PAM.so
gcc  -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong  PAM.o  -o blib/arch/auto/Authen/PAM/PAM.so  \
   -lpam -lperl   \
  
chmod 755 blib/arch/auto/Authen/PAM/PAM.so
Manifying 2 pod documents
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.OJJeTQ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build
+ mkdir /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT
+ cd Authen-PAM-0.16
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.40.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- PAM.bs blib/arch/auto/Authen/PAM/PAM.bs 644
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/auto/Authen/PAM/PAM.so
Installing /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/Authen/PAM.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/Authen/PAM/FAQ.pod
Installing /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/share/man/man3/Authen::PAM::FAQ.3pm
Installing /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/share/man/man3/Authen::PAM.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/lib64/perl5/perllocal.pod
+ /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 0.160.0-31.mga10 --unique-debug-suffix -0.160.0-31.mga10.x86_64 --unique-debug-src-base perl-Authen-PAM-0.160.0-31.mga10.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/Authen-PAM-0.16
find-debuginfo: starting

Extracting debug info from 1 files
objcopy: unable to copy file '/home/pterjan/rpmbuild/BUILD/perl-Authen-PAM-0.160.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/auto/Authen/PAM/PAM.so'; reason: Permission denied
*** ERROR:: GDB exited with exit status 1 during index generation
error: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.OJJeTQ (%install)

RPM build errors:
    Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.OJJeTQ (%install)
I: [iurt_root_command] ERROR: chroot