D: [iurt_root_command] chroot
Building target platforms: x86_64
Building for target x86_64
Installing /home/pterjan/rpmbuild/SRPMS/gphoto2-2.5.28-2.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.H6dwok
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ test -d /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.2WuxLL
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ rm -rf gphoto2-2.5.28
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/gphoto2-2.5.28.tar.bz2
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd gphoto2-2.5.28
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/use-CDK_CONST-to-match-whatever-const-mode-cdk-was-built-.patch
+ /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Fsus66
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ cd gphoto2-2.5.28
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full '
+ export FFLAGS
+ FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ CONFIGURE_TOP=.
+ '[' 1 = 1 ']'
++ find . -name config.guess -o -name config.sub
+ for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub)
++ basename ./auto-aux/config.guess
+ '[' -f /usr/lib/rpm/mageia/config.guess ']'
++ basename ./auto-aux/config.guess
+ cp -af /usr/lib/rpm/mageia/config.guess ./auto-aux/config.guess
+ for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub)
++ basename ./auto-aux/config.sub
+ '[' -f /usr/lib/rpm/mageia/config.sub ']'
++ basename ./auto-aux/config.sub
+ cp -af /usr/lib/rpm/mageia/config.sub ./auto-aux/config.sub
+ /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool
Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html)
+ /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool
Modifying auto-aux/ltmain.sh underlinking for plugins (cf http://wiki.mandriva.com/en/Underlinking)
+ /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking
+ /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs .
Fixing libtool inside configure to pass -Wl,xxx options before libraries
+ /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64
Forcing run-time library search path definition in configure to prevent libtool from adding rpath for standard directories (configure was generated with libtool without support for autodetection)
+ ./configure --host=x86_64-mageia-linux-gnu --build=x86_64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for POSIX sh $() command substitution... yes
checking for x86_64-mageia-linux-gnu-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... none
checking how to run the C preprocessor... gcc -E
checking build system type... x86_64-mageia-linux-gnu
checking host system type... x86_64-mageia-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-mageia-linux-gnu file names to x86_64-mageia-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-mageia-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for x86_64-mageia-linux-gnu-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-mageia-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-mageia-linux-gnu-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for x86_64-mageia-linux-gnu-strip... no
checking for strip... strip
checking for x86_64-mageia-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-mageia-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for po/Makevars requiring hack... no
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for x86_64-mageia-linux-gnu-pkg-config... /usr/bin/x86_64-mageia-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBGPHOTO2... yes
checking for strptime... yes
checking for signal... yes
checking for pause... yes
checking for sleep... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking process.h usability... no
checking process.h presence... no
checking for process.h... no
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking for spawnve... no
checking for floor in -lm... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_exit in -lpthread... yes
checking cdk/cdk.h usability... yes
checking cdk/cdk.h presence... yes
checking for cdk/cdk.h... yes
checking for cdk5-config... /usr/bin/cdk5-config
checking for newCDKFScale in -lcdk... yes
checking cdk.h usability... yes
checking cdk.h presence... yes
checking for cdk.h... yes
checking for cdk5-config... (cached) /usr/bin/cdk5-config
checking for newCDKFScale in -lcdk... (cached) yes
checking whether SIGHUP is declared... yes
checking whether SIGINT is declared... yes
checking whether SIGUSR1 is declared... yes
checking whether SIGUSR2 is declared... yes
checking whether SIGTERM is declared... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for jpeg_read_scanlines in -ljpeg... yes
checking for LIBEXIF... yes
checking aalib.h usability... yes
checking aalib.h presence... yes
checking for aalib.h... yes
checking for aalib-config... /usr/bin/aalib-config
checking for POPT... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking for rl_completion_append_character in -lreadline... yes
checking for rl_completion_matches in -lreadline... yes
checking for rl_copy_text in -lreadline... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating po/Makefile.in
config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting
config.status: creating Makefile
config.status: creating gphoto2/Makefile
config.status: creating gphoto-m4/Makefile
config.status: creating doc/Makefile
config.status: creating contrib/Makefile
config.status: creating packaging/Makefile
config.status: creating packaging/rpm/Makefile
config.status: creating packaging/rpm/package.spec
config.status: creating tests/data/Makefile
config.status: creating tests/staging/subdir1/Makefile
config.status: creating tests/staging/subdir2/Makefile
config.status: creating tests/staging/Makefile
config.status: creating tests/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
Configuration (gphoto2 2.5.28):
Build
Source code location: .
Compiler: gcc
Features
Use translations: yes
pthread support: yes (-lpthread)
Interactive config support: yes
JPEG support: yes
Text preview support: yes
Readline support: yes (doesn't require explicit -lncurses)
You may run "make" and "make install" now.
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
/usr/bin/make all-recursive
Making all in gphoto-m4
make[2]: Nothing to be done for 'all'.
Making all in contrib
make[2]: Nothing to be done for 'all'.
Making all in doc
make[2]: Nothing to be done for 'all'.
Making all in gphoto2
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-gphoto2-cmd-capture.o `test -f 'gphoto2-cmd-capture.c' || echo './'`gphoto2-cmd-capture.c
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-version.o `test -f 'version.c' || echo './'`version.c
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-spawnve.o `test -f 'spawnve.c' || echo './'`spawnve.c
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-gp-params.o `test -f 'gp-params.c' || echo './'`gp-params.c
gp-params.c: In function 'ctx_progress_update_func':
gp-params.c:170:17: warning: '__builtin___strncat_chk' output may be truncated copying between 0 and 9 bytes from a string of length 9 [-Wstringop-truncation]
170 | strncat (remaining, buf, sizeof (remaining) - strlen (remaining) - 1);
| ^
gp-params.c:175:17: warning: '__builtin___strncat_chk' output may be truncated copying between 0 and 9 bytes from a string of length 9 [-Wstringop-truncation]
175 | strncat (remaining, buf, sizeof (remaining) - strlen (remaining) - 1);
| ^
gp-params.c:179:17: warning: '__builtin___strncat_chk' output may be truncated copying between 0 and 9 bytes from a string of length 9 [-Wstringop-truncation]
179 | strncat (remaining, buf, sizeof (remaining) - strlen (remaining) - 1);
| ^
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-gphoto2-cmd-config.o `test -f 'gphoto2-cmd-config.c' || echo './'`gphoto2-cmd-config.c
gphoto2-cmd-config.c:21:9: warning: "_XOPEN_SOURCE" redefined
21 | #define _XOPEN_SOURCE
| ^~~~~~~~~~~~~
<command-line>: note: this is the location of the previous definition
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-range.o `test -f 'range.c' || echo './'`range.c
range.c:22:9: warning: "_XOPEN_SOURCE" redefined
22 | #define _XOPEN_SOURCE 500
| ^~~~~~~~~~~~~
<command-line>: note: this is the location of the previous definition
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-foreach.o `test -f 'foreach.c' || echo './'`foreach.c
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-shell.o `test -f 'shell.c' || echo './'`shell.c
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-actions.o `test -f 'actions.c' || echo './'`actions.c
actions.c:22:9: warning: "_XOPEN_SOURCE" redefined
22 | #define _XOPEN_SOURCE /* strptime proto, but this hides other prototypes */
| ^~~~~~~~~~~~~
<command-line>: note: this is the location of the previous definition
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -c -o gphoto2-main.o `test -f 'main.c' || echo './'`main.c
main.c:22:9: warning: "_XOPEN_SOURCE" redefined
22 | #define _XOPEN_SOURCE 500
| ^~~~~~~~~~~~~
<command-line>: note: this is the location of the previous definition
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
/bin/sh ../libtool --tag=CC --mode=link gcc -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -g -o gphoto2 gphoto2-gphoto2-cmd-capture.o gphoto2-gphoto2-cmd-config.o gphoto2-actions.o gphoto2-foreach.o gphoto2-gp-params.o gphoto2-spawnve.o gphoto2-main.o gphoto2-version.o gphoto2-range.o gphoto2-shell.o -lgphoto2 -lgphoto2_port -lm -Wl,--no-undefined -Wl,-O1 -Wl,--enable-new-dtags -lcdk -lncurses -ltinfo -L/usr/lib64 -laa -lm -lX11 -lgpm -lslang -ljpeg -lpthread -lexif -lreadline -lpopt -lm
libtool: link: gcc -I.. -I../gphoto2 -I/usr/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR=\"/usr/share/locale\" -D_GPHOTO2_INTERNAL_CODE -g -pipe -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED -I/usr/include -I/usr/include/libexif -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -Wall -Wmissing-declarations -Wmissing-prototypes -g -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -g -o gphoto2 gphoto2-gphoto2-cmd-capture.o gphoto2-gphoto2-cmd-config.o gphoto2-actions.o gphoto2-foreach.o gphoto2-gp-params.o gphoto2-spawnve.o gphoto2-main.o gphoto2-version.o gphoto2-range.o gphoto2-shell.o -Wl,--no-undefined -Wl,-O1 -Wl,--enable-new-dtags -lgphoto2 -lgphoto2_port -lcdk -lncurses -ltinfo -L/usr/lib64 -laa -lX11 -lgpm -lslang -ljpeg -lpthread -lexif -lreadline -lpopt -lm
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
Making all in packaging
Making all in rpm
make[3]: Nothing to be done for 'all'.
make[3]: Nothing to be done for 'all-am'.
Making all in po
make[2]: Nothing to be done for 'all'.
Making all in tests
Making all in data
make[3]: Nothing to be done for 'all'.
Making all in staging
Making all in subdir1
make[4]: Nothing to be done for 'all'.
Making all in subdir2
make[4]: Nothing to be done for 'all'.
make[4]: Nothing to be done for 'all-am'.
make[3]: Nothing to be done for 'all-am'.
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.EqgIRH
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ mkdir /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT
+ cd gphoto2-2.5.28
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
Making install in gphoto-m4
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto-m4'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto-m4'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto-m4'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto-m4'
Making install in contrib
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/contrib'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/contrib'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/contrib'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/contrib'
Making install in doc
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/doc'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/doc'
make[2]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/man/man1'
/usr/bin/install -p -m 644 gphoto2.1 '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/man/man1'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/doc'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/doc'
Making install in gphoto2
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
/usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/bin'
/bin/sh ../libtool --mode=install /usr/bin/install -p gphoto2 '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/bin'
libtool: install: /usr/bin/install -p gphoto2 /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/bin/gphoto2
/usr/bin/mkdir -p '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2'
/usr/bin/install -p -m 644 test-hook.sh '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2'
Making install in packaging
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging'
Making install in rpm
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging/rpm'
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging/rpm'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging/rpm'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging/rpm'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging'
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/packaging'
Making install in po
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/po'
/bin/sh ../auto-aux/mkinstalldirs /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/az/LC_MESSAGES
installing az.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/az/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/cs/LC_MESSAGES
installing cs.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/cs/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/da/LC_MESSAGES
installing da.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/da/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/de/LC_MESSAGES
installing de.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/de/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/en_GB/LC_MESSAGES
installing en_GB.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/en_GB/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/es/LC_MESSAGES
installing es.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/es/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/eu/LC_MESSAGES
installing eu.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/eu/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/fi/LC_MESSAGES
installing fi.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/fi/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/fr/LC_MESSAGES
installing fr.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/fr/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/hu/LC_MESSAGES
installing hu.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/hu/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/id/LC_MESSAGES
installing id.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/id/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/is/LC_MESSAGES
installing is.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/is/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/it/LC_MESSAGES
installing it.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/it/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/ja/LC_MESSAGES
installing ja.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/ja/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/nl/LC_MESSAGES
installing nl.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/nl/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/pa/LC_MESSAGES
installing pa.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/pa/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/pl/LC_MESSAGES
installing pl.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/pl/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/pt_BR/LC_MESSAGES
installing pt_BR.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/pt_BR/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/ro/LC_MESSAGES
installing ro.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/ro/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/ru/LC_MESSAGES
installing ru.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/ru/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/rw/LC_MESSAGES
installing rw.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/rw/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/sk/LC_MESSAGES
installing sk.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/sk/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/sr/LC_MESSAGES
installing sr.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/sr/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/sv/LC_MESSAGES
installing sv.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/sv/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/uk/LC_MESSAGES
installing uk.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/uk/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/vi/LC_MESSAGES
installing vi.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/vi/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/zh_CN/LC_MESSAGES
installing zh_CN.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/zh_CN/LC_MESSAGES/gphoto2.mo
mkdir -p -- /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/zh_TW/LC_MESSAGES
installing zh_TW.gmo as /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/locale/zh_TW/LC_MESSAGES/gphoto2.mo
if test "gphoto2" = "gettext-tools"; then \
/bin/sh ../auto-aux/mkinstalldirs /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/gettext/po; \
for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \
/usr/bin/install -p -m 644 ./$file \
/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/gettext/po/$file; \
done; \
for file in Makevars; do \
rm -f /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/gettext/po/$file; \
done; \
else \
: ; \
fi
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/po'
Making install in tests
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests'
Making install in data
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/data'
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/data'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/data'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/data'
Making install in staging
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging'
Making install in subdir1
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir1'
make[4]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir1'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir1'
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir1'
Making install in subdir2
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir2'
make[4]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir2'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir2'
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging/subdir2'
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging'
make[4]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging'
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests/staging'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests'
make[3]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests'
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/tests'
make[1]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28'
make[2]: Entering directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28'
make[1]: Leaving directory '/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28'
+ /usr/lib/rpm/find-lang.sh /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT gphoto2
+ /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 2.5.28-2.mga10 --unique-debug-suffix -2.5.28-2.mga10.x86_64 --unique-debug-src-base gphoto2-2.5.28-2.mga10.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28
find-debuginfo: starting
Extracting debug info from 1 files
DWARF-compressing 1 files
sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
Creating .debug symlinks for symlinks to ELF files
Copying sources found by 'debugedit -l' to /usr/src/debug/gphoto2-2.5.28-2.mga10.x86_64
find-debuginfo: done
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Reading /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/SPECPARTS/rpm-debuginfo.specpart
Processing files: gphoto2-2.5.28-2.mga10.x86_64
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Kf8897
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ cd gphoto2-2.5.28
+ DOCDIR=/home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ cp -pr /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/NEWS /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ cp -pr /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/ChangeLog /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ cp -pr /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/README /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ cp -pr /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/TODO /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ cp -pr /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/gphoto2-2.5.28/gphoto2/test-hook.sh /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT/usr/share/doc/gphoto2
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: gphoto2 = 2.5.28-2.mga10 gphoto2(x86-64) = 2.5.28-2.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: libaa.so.1()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.38)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libcdk.so.5()(64bit) libexif.so.12()(64bit) libgphoto2.so.6()(64bit) libgphoto2_port.so.12()(64bit) libgphoto2_port.so.12(LIBGPHOTO2_5_0)(64bit) libjpeg.so.8()(64bit) libjpeg.so.8(LIBJPEG_8.0)(64bit) libncurses.so.6()(64bit) libpopt.so.0()(64bit) libpopt.so.0(LIBPOPT_0)(64bit) libreadline.so.8()(64bit)
Processing files: gphoto2-debugsource-2.5.28-2.mga10.x86_64
Provides: gphoto2-debugsource = 2.5.28-2.mga10 gphoto2-debugsource(x86-64) = 2.5.28-2.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: gphoto2-debuginfo-2.5.28-2.mga10.x86_64
Provides: debuginfo(build-id) = 92eb4ab07fdf141151af2da86ce1e153827132d5 gphoto2-debuginfo = 2.5.28-2.mga10 gphoto2-debuginfo(x86-64) = 2.5.28-2.mga10
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: gphoto2-debugsource(x86-64) = 2.5.28-2.mga10
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build/BUILDROOT
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/gphoto2-debugsource-2.5.28-2.mga10.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/gphoto2-2.5.28-2.mga10.x86_64.rpm
Wrote: /home/pterjan/rpmbuild/RPMS/x86_64/gphoto2-debuginfo-2.5.28-2.mga10.x86_64.rpm
Executing(rmbuild): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Tv89E3
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ test -d /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ rm -rf /home/pterjan/rpmbuild/BUILD/gphoto2-2.5.28-build
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!