D: [iurt_root_command] chroot
Building target platforms: x86_64
Building for target x86_64
Installing /home/pterjan/rpmbuild/SRPMS/perl-Image-Sane-5.0.0-8.mga10.src.rpm
Executing(%mkbuilddir): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Lnv0t2
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ test -d /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.nIH9VJ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ rm -rf Image-Sane-5
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/Image-Sane-5.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Image-Sane-5
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f
+ /usr/lib/rpm/rpmuncompress /home/pterjan/rpmbuild/SOURCES/Image-Sane-5-Replace-deprecated-given-and-when-operators.patch
+ chmod -x examples/scanadf-perl examples/scanimage-perl
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.jyXAJD
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ cd Image-Sane-5
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor NO_PACKLIST=1 'OPTIMIZE=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full'
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Image::Sane
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j16 V=1 VERBOSE=1
cp lib/Image/Sane.pm blib/lib/Image/Sane.pm
cp lib/Image/Sane/Device.pm blib/lib/Image/Sane/Device.pm
Running Mkbootstrap for Sane ()
chmod 644 "Sane.bs"
"/usr/bin/perl5.40.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Sane.bs blib/arch/auto/Image/Sane/Sane.bs 644
"/usr/bin/perl5.40.0" "/usr/share/perl5/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/Image-Sane-5/typemap'  Sane.xs > Sane.xsc
mv Sane.xsc Sane.c
gcc -c  -I.  -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full   -DVERSION=\"5\" -DXS_VERSION=\"5\" -fPIC "-I/usr/lib64/perl5/CORE"   Sane.c
rm -f blib/arch/auto/Image/Sane/Sane.so
gcc  -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong  Sane.o  -o blib/arch/auto/Image/Sane/Sane.so  \
   -lsane -lperl   \
  
chmod 755 blib/arch/auto/Image/Sane/Sane.so
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.nGgv5b
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT
++ dirname /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT
+ mkdir -p /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ mkdir /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT
+ cd Image-Sane-5
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.40.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Sane.bs blib/arch/auto/Image/Sane/Sane.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/auto/Image/Sane/Sane.so
Installing /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/Image/Sane.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT/usr/lib64/perl5/vendor_perl/Image/Sane/Device.pm
Installing /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT/usr/share/man/man3/Image::Sane.3pm
Appending installation info to /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT/usr/lib64/perl5/perllocal.pod
+ find /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT -type f -name '*.bs' -size 0 -delete
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/BUILDROOT/usr
+ /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 5.0.0-8.mga10 --unique-debug-suffix -5.0.0-8.mga10.x86_64 --unique-debug-src-base perl-Image-Sane-5.0.0-8.mga10.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/Image-Sane-5
find-debuginfo: starting

Extracting debug info from 1 files
DWARF-compressing 1 files
sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
Creating .debug symlinks for symlinks to ELF files
Copying sources found by 'debugedit -l' to /usr/src/debug/perl-Image-Sane-5.0.0-8.mga10.x86_64
find-debuginfo: done
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ env -u SOURCE_DATE_EPOCH /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j16
+ /usr/lib/rpm/redhat/brp-python-hardlink
Reading /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build/SPECPARTS/rpm-debuginfo.specpart
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.LRHGyN
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD/perl-Image-Sane-5.0.0-build
+ cd Image-Sane-5
+ '[' 1 -eq 1 ']'
+ /usr/bin/make test
"/usr/bin/perl5.40.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Sane.bs blib/arch/auto/Image/Sane/Sane.bs 644
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.40.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1_init.t ............. ok
t/2_exit.t ............. ok
I: [iurt_root_command] ERROR: chroot