D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/pdf-stapler-1.0.0-0.rc1.5.mga9.src.rpm
Building target platforms: noarch
Building for target noarch
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.pWuIxl
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf stapler-1.0.0rc1
+ /usr/lib/rpm/rpmuncompress -x /home/pterjan/rpmbuild/SOURCES/stapler-1.0.0rc1.tar.xz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd stapler-1.0.0rc1
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.eEKVtx
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
+ LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags'
+ /usr/bin/python3 setup.py build '--executable=/usr/bin/python3 -s'
/usr/lib/python3.10/site-packages/setuptools/dist.py:530: UserWarning: Normalizing '1.0.0-rc1' to '1.0.0rc1'
warnings.warn(tmpl.format(**locals()))
running build
running build_py
creating build
creating build/lib
creating build/lib/staplelib
copying staplelib/stapler.py -> build/lib/staplelib
copying staplelib/iohelper.py -> build/lib/staplelib
copying staplelib/tests.py -> build/lib/staplelib
copying staplelib/commands.py -> build/lib/staplelib
copying staplelib/__init__.py -> build/lib/staplelib
running egg_info
creating stapler.egg-info
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
writing entry points to stapler.egg-info/entry_points.txt
writing requirements to stapler.egg-info/requires.txt
writing top-level names to stapler.egg-info/top_level.txt
writing manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'stapler.egg-info/SOURCES.txt'
/usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning: Installing 'staplelib.testfiles' as data is deprecated, please list it in `packages`.
!!
############################
# Package would be ignored #
############################
Python recognizes 'staplelib.testfiles' as an importable package,
but it is not listed in the `packages` configuration of setuptools.
'staplelib.testfiles' has been automatically added to the distribution only
because it may contain data files, but this behavior is likely to change
in future versions of setuptools (and therefore is considered deprecated).
Please make sure that 'staplelib.testfiles' is included as a package by using
the `packages` configuration field or the proper discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" and "data files" on setuptools
documentation page.
!!
check.warn(importable)
creating build/lib/staplelib/testfiles
copying staplelib/testfiles/1page.pdf -> build/lib/staplelib/testfiles
copying staplelib/testfiles/5page.pdf -> build/lib/staplelib/testfiles
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.hUOIEW
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
++ dirname /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
+ cd stapler-1.0.0rc1
+ '[' 1 -eq 1 ']'
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
+ LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags'
+ /usr/bin/python3 setup.py install -O1 --skip-build --root /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
/usr/lib/python3.10/site-packages/setuptools/dist.py:530: UserWarning: Normalizing '1.0.0-rc1' to '1.0.0rc1'
warnings.warn(tmpl.format(**locals()))
running install
/usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running install_lib
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/testfiles
copying build/lib/staplelib/testfiles/1page.pdf -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/testfiles
copying build/lib/staplelib/testfiles/5page.pdf -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/testfiles
copying build/lib/staplelib/stapler.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/iohelper.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/tests.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/commands.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/__init__.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/stapler.py to stapler.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/iohelper.py to iohelper.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/tests.py to tests.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/commands.py to commands.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/__init__.py to __init__.cpython-310.pyc
writing byte-compilation script '/tmp/tmpcud406mv.py'
/usr/bin/python3 /tmp/tmpcud406mv.py
removing /tmp/tmpcud406mv.py
running install_egg_info
running egg_info
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
writing entry points to stapler.egg-info/entry_points.txt
writing requirements to stapler.egg-info/requires.txt
writing top-level names to stapler.egg-info/top_level.txt
reading manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'stapler.egg-info/SOURCES.txt'
Copying stapler.egg-info to /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/stapler-1.0.0rc1-py3.10.egg-info
running install_scripts
Installing pdf-stapler script to /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/bin
Installing stapler script to /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/bin
+ rm -rfv /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/bin/__pycache__
+ /usr/bin/find-debuginfo -j32 --strict-build-id -m -i --build-id-seed 1.0.0-0.rc1.5.mga9 --unique-debug-suffix -1.0.0-0.rc1.5.mga9.noarch --unique-debug-src-base pdf-stapler-1.0.0-0.rc1.5.mga9.noarch --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0
Bytecompiling .py files below /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10 using python3.10
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.Ku6CGB
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ '[' 1 -eq 1 ']'
+ /usr/bin/python3 setup.py test
/usr/lib/python3.10/site-packages/setuptools/dist.py:530: UserWarning: Normalizing '1.0.0-rc1' to '1.0.0rc1'
warnings.warn(tmpl.format(**locals()))
running test
WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox.
running egg_info
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
writing entry points to stapler.egg-info/entry_points.txt
writing requirements to stapler.egg-info/requires.txt
writing top-level names to stapler.egg-info/top_level.txt
reading manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'stapler.egg-info/SOURCES.txt'
running build_ext
test_cat (staplelib.tests.TestStapler)
Make sure files are properly concatenated. ... ok
test_del_one_page (staplelib.tests.TestStapler)
Test del command for inverse select of one page. ... ok
test_del_range (staplelib.tests.TestStapler)
Test del command for inverse select multiple pages. ... ok
test_output_file_already_exists (staplelib.tests.TestStapler)
Test zip. ... ok
test_sel_one_page (staplelib.tests.TestStapler)
Test select of a one page from a PDF file. ... ok
test_sel_range (staplelib.tests.TestStapler)
Test select of more pages from a PDF file. ... ok
test_split (staplelib.tests.TestStapler)
Make sure a file is properly split into pages. ... Traceback (most recent call last):
File "/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/../stapler", line 15, in <module>
stapler.main()
File "/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/stapler.py", line 116, in main
modes[mode](args)
File "/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/commands.py", line 113, in split
iohelper.write_pdf(output, staplelib.OPTIONS.destdir +
File "/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/iohelper.py", line 59, in write_pdf
pdf.write(outputStream)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 475, in write
self._sweepIndirectReferences(externalReferenceMap, self._root)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 566, in _sweepIndirectReferences
self._sweepIndirectReferences(externMap, realdata)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 542, in _sweepIndirectReferences
value = self._sweepIndirectReferences(externMap, value)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 566, in _sweepIndirectReferences
self._sweepIndirectReferences(externMap, realdata)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 542, in _sweepIndirectReferences
value = self._sweepIndirectReferences(externMap, value)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 551, in _sweepIndirectReferences
value = self._sweepIndirectReferences(externMap, data[i])
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 566, in _sweepIndirectReferences
self._sweepIndirectReferences(externMap, realdata)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 542, in _sweepIndirectReferences
value = self._sweepIndirectReferences(externMap, value)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 583, in _sweepIndirectReferences
newobj = self._sweepIndirectReferences(externMap, newobj)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 542, in _sweepIndirectReferences
value = self._sweepIndirectReferences(externMap, value)
File "/usr/lib/python3.10/site-packages/PyPDF2/pdf.py", line 569, in _sweepIndirectReferences
if data.pdf.stream.closed:
AttributeError: 'PdfFileWriter' object has no attribute 'stream'
ERROR
test_zip (staplelib.tests.TestStapler)
Test zip. ... ok
======================================================================
ERROR: test_split (staplelib.tests.TestStapler)
Make sure a file is properly split into pages.
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/tests.py", line 86, in test_split
check_call([STAPLER, 'split', FIVEPAGE_PDF])
File "/usr/lib64/python3.10/subprocess.py", line 369, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/../stapler', 'split', '/home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1/staplelib/testfiles/5page.pdf']' returned non-zero exit status 1.
----------------------------------------------------------------------
Ran 8 tests in 0.734s
FAILED (errors=1)
Test failed: <unittest.runner.TextTestResult run=8 errors=1 failures=0>
error: Test failed: <unittest.runner.TextTestResult run=8 errors=1 failures=0>
error: Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.Ku6CGB (%check)
RPM build errors:
Bad exit status from /home/pterjan/rpmbuild/tmp/rpm-tmp.Ku6CGB (%check)
I: [iurt_root_command] ERROR: chroot