D: [iurt_root_command] chroot
Installing /home/pterjan/rpmbuild/SRPMS/pdf-stapler-1.0.0-0.rc1.5.mga9.src.rpm
Building target platforms: noarch
Building for target noarch
Executing(%prep): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.JHjlX2
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf stapler-1.0.0rc1
+ /usr/bin/xz -dc /home/pterjan/rpmbuild/SOURCES/stapler-1.0.0rc1.tar.xz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd stapler-1.0.0rc1
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.HDgNbZ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
+ LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags'
+ /usr/bin/python3 setup.py build '--executable=/usr/bin/python3 -s'
/usr/lib/python3.10/site-packages/setuptools/dist.py:493: UserWarning: Normalizing '1.0.0-rc1' to '1.0.0rc1'
  warnings.warn(tmpl.format(**locals()))
running build
running build_py
creating build
creating build/lib
creating build/lib/staplelib
copying staplelib/stapler.py -> build/lib/staplelib
copying staplelib/iohelper.py -> build/lib/staplelib
copying staplelib/tests.py -> build/lib/staplelib
copying staplelib/commands.py -> build/lib/staplelib
copying staplelib/__init__.py -> build/lib/staplelib
running egg_info
creating stapler.egg-info
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
writing entry points to stapler.egg-info/entry_points.txt
writing requirements to stapler.egg-info/requires.txt
writing top-level names to stapler.egg-info/top_level.txt
writing manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'stapler.egg-info/SOURCES.txt'
creating build/lib/staplelib/testfiles
copying staplelib/testfiles/1page.pdf -> build/lib/staplelib/testfiles
copying staplelib/testfiles/5page.pdf -> build/lib/staplelib/testfiles
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.y9WtkZ
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch '!=' / ']'
+ rm -rf /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
++ dirname /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
+ mkdir -p /home/pterjan/rpmbuild/BUILDROOT
+ mkdir /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
+ cd stapler-1.0.0rc1
+ '[' 1 -eq 1 ']'
+ CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
+ LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags'
+ /usr/bin/python3 setup.py install -O1 --skip-build --root /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
/usr/lib/python3.10/site-packages/setuptools/dist.py:493: UserWarning: Normalizing '1.0.0-rc1' to '1.0.0rc1'
  warnings.warn(tmpl.format(**locals()))
running install
/usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
  warnings.warn(
running install_lib
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
creating /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/testfiles
copying build/lib/staplelib/testfiles/1page.pdf -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/testfiles
copying build/lib/staplelib/testfiles/5page.pdf -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/testfiles
copying build/lib/staplelib/stapler.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/iohelper.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/tests.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/commands.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
copying build/lib/staplelib/__init__.py -> /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/stapler.py to stapler.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/iohelper.py to iohelper.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/tests.py to tests.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/commands.py to commands.cpython-310.pyc
byte-compiling /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/staplelib/__init__.py to __init__.cpython-310.pyc
writing byte-compilation script '/tmp/tmpxjtia151.py'
/usr/bin/python3 -Wignore:The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives:DeprecationWarning /tmp/tmpxjtia151.py
removing /tmp/tmpxjtia151.py
running install_egg_info
running egg_info
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
writing entry points to stapler.egg-info/entry_points.txt
writing requirements to stapler.egg-info/requires.txt
writing top-level names to stapler.egg-info/top_level.txt
reading manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'stapler.egg-info/SOURCES.txt'
Copying stapler.egg-info to /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10/site-packages/stapler-1.0.0rc1-py3.10.egg-info
running install_scripts
Installing stapler script to /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/bin
Installing pdf-stapler script to /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/bin
+ rm -rfv /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/bin/__pycache__
+ /usr/bin/find-debuginfo -j16 --strict-build-id -m -i --build-id-seed 1.0.0-0.rc1.5.mga9 --unique-debug-suffix -1.0.0-0.rc1.5.mga9.noarch --unique-debug-src-base pdf-stapler-1.0.0-0.rc1.5.mga9.noarch --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/pterjan/rpmbuild/BUILD/stapler-1.0.0rc1

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0
Bytecompiling .py files below /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/lib/python3.10 using python3.10
+ /usr/lib/rpm/redhat/brp-python-hardlink
Executing(%check): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.7dDzWf
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ '[' 1 -eq 1 ']'
+ /usr/bin/python3 setup.py test
/usr/lib/python3.10/site-packages/setuptools/dist.py:493: UserWarning: Normalizing '1.0.0-rc1' to '1.0.0rc1'
  warnings.warn(tmpl.format(**locals()))
running test
WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox.
running egg_info
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
writing entry points to stapler.egg-info/entry_points.txt
writing requirements to stapler.egg-info/requires.txt
writing top-level names to stapler.egg-info/top_level.txt
reading manifest file 'stapler.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'LICENSE'
writing manifest file 'stapler.egg-info/SOURCES.txt'
running build_ext
test_cat (staplelib.tests.TestStapler)
Make sure files are properly concatenated. ... ok
test_del_one_page (staplelib.tests.TestStapler)
Test del command for inverse select of one page. ... ok
test_del_range (staplelib.tests.TestStapler)
Test del command for inverse select multiple pages. ... ok
test_output_file_already_exists (staplelib.tests.TestStapler)
Test zip. ... ok
test_sel_one_page (staplelib.tests.TestStapler)
Test select of a one page from a PDF file. ... ok
test_sel_range (staplelib.tests.TestStapler)
Test select of more pages from a PDF file. ... ok
test_split (staplelib.tests.TestStapler)
Make sure a file is properly split into pages. ... ok
test_zip (staplelib.tests.TestStapler)
Test zip. ... ok

----------------------------------------------------------------------
Ran 8 tests in 0.397s

OK
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
Executing(%doc): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.IZrN1k
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ DOCDIR=/home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/doc/pdf-stapler
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/doc/pdf-stapler
+ cp -pr README.rst /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/doc/pdf-stapler
+ cp -pr TODO /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/doc/pdf-stapler
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%license): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.JolKi1
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ LICENSEDIR=/home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/licenses/pdf-stapler
+ export LC_ALL=C
+ LC_ALL=C
+ export LICENSEDIR
+ /usr/bin/mkdir -p /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/licenses/pdf-stapler
+ cp -pr LICENSE /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch/usr/share/licenses/pdf-stapler
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: pdf-stapler = 1.0.0-0.rc1.5.mga9 python3-staplelib = 1.0.0-0.rc1.5.mga9 python3.10dist(stapler) = 1~rc1 python3dist(stapler) = 1~rc1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: python(abi) = 3.10 python3.10dist(more-itertools) >= 2.2 python3.10dist(pypdf2) >= 1.26
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
Wrote: /home/pterjan/rpmbuild/RPMS/noarch/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch.rpm
Executing(%clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.1IuHY7
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ cd stapler-1.0.0rc1
+ /usr/bin/rm -rf /home/pterjan/rpmbuild/BUILDROOT/pdf-stapler-1.0.0-0.rc1.5.mga9.noarch
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/pterjan/rpmbuild/tmp/rpm-tmp.RaDkDt
+ umask 022
+ cd /home/pterjan/rpmbuild/BUILD
+ rm -rf stapler-1.0.0rc1
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!