D: [iurt_root_command] chroot RTNETLINK answers: Invalid argument RTNETLINK answers: Invalid argument Installing /home/iurt/rpmbuild/SRPMS/zapata-1.4.12.1-15.mga8.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.BIrLpG + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf zaptel-1.4.12.1 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/zaptel-1.4.12.1.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd zaptel-1.4.12.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (zaptel-1.4.12.1-printf.diff):' Patch #0 (zaptel-1.4.12.1-printf.diff): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .fprintf --fuzz=0 patching file ztcfg.c + echo 'Patch #1 (zaptel-1.4.12.1-makefile.diff):' Patch #1 (zaptel-1.4.12.1-makefile.diff): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel --fuzz=0 patching file Makefile + echo 'Patch #2 (zaptel-1.4.12.1-firmware.diff):' Patch #2 (zaptel-1.4.12.1-firmware.diff): + /usr/bin/patch --no-backup-if-mismatch -p0 -b --suffix .firmware --fuzz=0 patching file Makefile + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/autoconf.h . + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz -C ./firmware/ zaptel-fw-oct6114-064.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz -C ./firmware/ zaptel-fw-oct6114-128.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz -C ./firmware/ zaptel-fw-tc400m.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz -C ./firmware/ zaptel-fw-vpmadt032.bin + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.NcQZzH + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd zaptel-1.4.12.1 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FCFLAGS + LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' + export LDFLAGS + CONFIGURE_TOP=. + '[' 1 = 1 ']' ++ find . -name config.guess -o -name config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./menuselect/config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./menuselect/config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./menuselect/config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./menuselect/config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./menuselect/config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./menuselect/config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./config.sub + /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html) + /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool + /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking + /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs . + /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64 + ./configure --host=x86_64-mageia-linux-gnu --build=x86_64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking for x86_64-mageia-linux-gnu-gcc... x86_64-mageia-linux-gnu-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether x86_64-mageia-linux-gnu-gcc accepts -g... yes checking for x86_64-mageia-linux-gnu-gcc option to accept ISO C89... none needed checking how to run the C preprocessor... x86_64-mageia-linux-gnu-gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking for GNU make... make checking for grep... /usr/bin/grep checking for sh... /bin/sh checking for ln... /usr/bin/ln checking for wget... /usr/bin/wget checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for newtBell in -lnewt... no checking for usb_init in -lusb... no configure: creating ./config.status config.status: creating build_tools/menuselect-deps config.status: creating makeopts config.status: creating build_tools/make_firmware_object configure: *** Zaptel build successfully configured *** + /usr/bin/make -O -j8 V=1 VERBOSE=1 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf"' prefix=/usr libdir=/usr/lib64 Generating input for menuselect ... make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for GNU make... make checking for asprintf... yes checking for getloadavg... yes checking for setenv... yes checking for strcasestr... yes checking for strndup... yes checking for strnlen... yes checking for strsep... yes checking for strtoq... yes checking for unsetenv... yes checking for vasprintf... yes checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for pkg-config... pkg-config Package gtk+-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `gtk+-2.0.pc' to the PKG_CONFIG_PATH environment variable Package 'gtk+-2.0', required by 'virtual:world', not found configure: creating ./config.status config.status: creating makeopts config.status: creating autoconfig.h configure: configuring in mxml configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' 'LDFLAGS=-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' --cache-file=/dev/null --srcdir=. checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for cp... /usr/bin/cp checking for ln... /usr/bin/ln checking for mkdir... /usr/bin/mkdir checking for nroff... no checking for groff... no checking for rm... /usr/bin/rm checking for strdup... yes checking for vsnprintf... yes configure: creating ./config.status config.status: creating Makefile config.status: creating mxml.list config.status: creating mxml.pc config.status: creating config.h configure: Menuselect build configuration successfully completed make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o strcompat.o strcompat.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-attr.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-entity.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-search.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-index.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-node.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o menuselect_curses.o menuselect_curses.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-string.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-private.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-set.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-file.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' /usr/bin/rm -f libmxml.a /usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o a - mxml-attr.o a - mxml-entity.o a - mxml-file.o a - mxml-index.o a - mxml-node.o a - mxml-search.o a - mxml-set.o a - mxml-private.o a - mxml-string.o ranlib libmxml.a make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o menuselect.o menuselect.c : warning: ISO C99 requires whitespace after the macro name menuselect.c: In function 'generate_makeopts_file': menuselect.c:1027:6: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 1027 | system(rmcommand); | ^~~~~~~~~~~~~~~~~ menuselect.c:1037:5: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 1037 | system(rmcommand); | ^~~~~~~~~~~~~~~~~ make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' x86_64-mageia-linux-gnu-gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o mxml/libmxml.a mxml/libmxml.a -lncurses make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -c -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zonedata.lo zonedata.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o zonedata.o zonedata.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztspeed.o -c ztspeed.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zttest.o -c zttest.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztscan.o -c ztscan.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztspeed ztspeed.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zttest zttest.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -c -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o tonezone.lo tonezone.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztscan ztscan.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' Building FXO modes from: ../../wctdm.c ../../fxo_modes.h perl -n -e 'print if (/^static struct fxo_mode {$/ .. /};$/)' ../../wctdm.c ../../fxo_modes.h >wctdm_fxomodes.h || rm -f wctdm_fxomodes.h make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o tonezone.o tonezone.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -shared -Wl,-soname,libtonezone.so.1.0 -o libtonezone.so zonedata.lo tonezone.lo -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' ar rcs libtonezone.a zonedata.o tonezone.o ranlib libtonezone.a make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztmonitor.o -c ztmonitor.c : warning: ISO C99 requires whitespace after the macro name ztmonitor.c: In function 'main': ztmonitor.c:633:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 633 | write(afd, buf_tx, res_brx << 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ztmonitor.c:635:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 635 | write(afd, buf_brx, res_brx); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 lszaptel > lszaptel.8 || rm -f lszaptel.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zt_registration > zt_registration.8 || rm -f zt_registration.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 xpp_blink > xpp_blink.8 || rm -f xpp_blink.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 xpp_sync > xpp_sync.8 || rm -f xpp_sync.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zapconf > zapconf.8 || rm -f zapconf.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o fxotune.o -c fxotune.c : warning: ISO C99 requires whitespace after the macro name fxotune.c: In function 'fxotune_read': fxotune.c:115:3: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 115 | write(audio_dump_fd, buffer, len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zaptel_hardware > zaptel_hardware.8 || rm -f zaptel_hardware.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztmonitor ztmonitor.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o fxotune fxotune.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' for i in zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware; do perl -I./zconf -c $i || exit 1; done zt_registration syntax OK xpp_sync syntax OK lszaptel syntax OK xpp_blink syntax OK zapconf syntax OK zaptel_hardware syntax OK touch perlcheck make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' cc -o print_modes -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" print_modes.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' ./print_modes >init_fxo_modes make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztcfg.o -c ztcfg.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' x86_64-mageia-linux-gnu-gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztcfg ztcfg.o libtonezone.a -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.5csfdI + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 + cd zaptel-1.4.12.1 + '[' 1 -eq 1 ']' + install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64//etc/rc.d/init.d + install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64//etc + install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/sysconfig + install -m0644 zaptel.conf.sample /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64//etc/zaptel.conf + install -m0755 zaptel.init /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64//etc/rc.d/init.d/zaptel + install -m0644 zaptel.sysconfig /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/sysconfig/zaptel + rm -rf /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 'INSTALL=/usr/bin/install -p' libdir=/usr/lib64 includedir=/usr/include PERLLIBDIR=/usr/share/perl5/vendor_perl make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/ctl rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/channel rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/pseudo rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/timer rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/transcode rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/253 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/252 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/251 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/250 N=1; \ while [ $N -lt 250 ]; do \ rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/dev/zap/$N; \ N=$[$N+1]; \ done [ `id -u` = 0 ] && /sbin/depmod -a 5.4.17-server-1.mga7 || : make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/sbin /usr/bin/install -p genzaptelconf zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/sbin/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/zaptel /usr/bin/install -p -m 644 ../firmwares/FPGA_1141.hex ../firmwares/FPGA_1151.hex ../firmwares/FPGA_FXS.hex ../firmwares/USB_FW.hex init_fxo_modes /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/zaptel/ /usr/bin/install -p ../init_card_1_30 ../init_card_2_30 ../init_card_3_30 ../init_card_4_30 xpp_fxloader /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/zaptel/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/man/man8 /usr/bin/install -p -m 644 genzaptelconf.8 zt_registration.8 xpp_sync.8 lszaptel.8 xpp_blink.8 zapconf.8 zaptel_hardware.8 /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/man/man8/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/hotplug/usb /usr/bin/install -p -m 644 xpp_fxloader.usermap /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/hotplug/usb/ # for backward compatibility and for hotplug users: ln -sf /usr/share/zaptel/xpp_fxloader /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/hotplug/usb/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/udev/rules.d /usr/bin/install -p -m 644 xpp.rules /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/udev/rules.d/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/perl5/vendor_perl for i in Zaptel Zaptel/Xpp Zaptel/Hardware Zaptel/Config; \ do \ /usr/bin/install -p -d "/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/perl5/vendor_perl/$i"; \ done for i in Zaptel.pm Zaptel/Chans.pm Zaptel/Hardware.pm Zaptel/Span.pm Zaptel/Utils.pm Zaptel/Xpp.pm Zaptel/Xpp/Line.pm Zaptel/Xpp/Xbus.pm Zaptel/Xpp/Xpd.pm Zaptel/Hardware/PCI.pm Zaptel/Hardware/USB.pm Zaptel/Config/Defaults.pm; \ do \ /usr/bin/install -p -m 644 "zconf/$i" "/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/perl5/vendor_perl/$i"; \ done make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin install fxotune ztcfg ztmonitor ztspeed zttest ztscan /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/man/man8 install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/share/man/man8/ /usr/bin/install -p -D -m 644 zaptel.conf.sample /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/zaptel.conf /usr/bin/install -p -D -m 755 libtonezone.a /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64/libtonezone.a /usr/bin/install -p -D -m 755 libtonezone.so /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64/libtonezone.so.1.0 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64libtonezone.so /usr/bin/ln -sf libtonezone.so.1.0 \ /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64/libtonezone.so.1 /usr/bin/ln -sf libtonezone.so.1.0 \ /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64/libtonezone.so /usr/bin/install -p -D -m 644 kernel/zaptel.h /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/include/zaptel/zaptel.h /usr/bin/install -p -D -m 644 tonezone.h /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/include/zaptel/tonezone.h /usr/bin/make -C firmware hotplug-install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 HOTPLUG_FIRMWARE=yes make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/firmware' mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib/hotplug/firmware mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/lib/firmware Installing zaptel-fw-oct6114-064.bin to hotplug firmware directories Installing zaptel-fw-oct6114-128.bin to hotplug firmware directories Installing zaptel-fw-tc400m.bin to hotplug firmware directories Installing zaptel-fw-vpmadt032.bin to hotplug firmware directories make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/firmware' ################################################### ### ### Zaptel installed successfully. ### If you have not done so before, install init scripts with: ### ### make config ### ################################################### + mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib + mv /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/etc/udev /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib/ + find /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 -name '*.a' -delete + /usr/lib/rpm/find-debuginfo.sh -j96 --strict-build-id -m -i --build-id-seed 1.4.12.1-15.mga8 --unique-debug-suffix -1.4.12.1-15.mga8.x86_64 --unique-debug-src-base zapata-1.4.12.1-15.mga8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1 explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/fxotune explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztmonitor explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/zttest explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztscan explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztspeed explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztcfg explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64/libtonezone.so.1.0 extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/fxotune extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztmonitor extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/usr/lib64/libtonezone.so.1.0 extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/zttest extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztscan extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztcfg extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64/sbin/ztspeed original debug info size: 372kB, size after compression: 360kB /usr/lib/rpm/sepdebugcrcfix: Updated 7 CRC32s, 0 CRC32s did match. 432 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/sbin/genzaptelconf from /bin/bash to #!/usr/bin/bash mangling shebang in /usr/share/zaptel/xpp_fxloader from /bin/bash to #!/usr/bin/bash Processing files: zapata-1.4.12.1-15.mga8.x86_64 Provides: zapata = 1.4.12.1-15.mga8 zapata(x86-64) = 1.4.12.1-15.mga8 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh Requires(preun): /bin/sh Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.2.5)(64bit) libm.so.6(GLIBC_2.27)(64bit) libm.so.6(GLIBC_2.29)(64bit) perl(File::Basename) perl(Getopt::Std) perl(Zaptel) perl(Zaptel::Config::Defaults) perl(Zaptel::Hardware) perl(Zaptel::Span) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl(strict) perl-base >= 2:5.32.0 Processing files: zapata-firmware-1.4.12.1-15.mga8.x86_64 Provides: zapata-firmware = 1.4.12.1-15.mga8 zapata-firmware(x86-64) = 1.4.12.1-15.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: lib64zap1-1.4.12.1-15.mga8.x86_64 Provides: lib64zap1 = 1.4.12.1-15.mga8 lib64zap1(x86-64) = 1.4.12.1-15.mga8 libtonezone.so.1.0()(64bit) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.2.5)(64bit) libm.so.6(GLIBC_2.29)(64bit) Processing files: lib64zap-devel-1.4.12.1-15.mga8.x86_64 Provides: lib64zap-devel = 1.4.12.1-15.mga8 lib64zap-devel(x86-64) = 1.4.12.1-15.mga8 libzap-devel = 1.4.12.1 zapata-devel = 1.4.12.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-zapata-1.4.12.1-15.mga8.x86_64 Provides: perl(Zaptel) perl(Zaptel::Chans) perl(Zaptel::Config::Defaults) perl(Zaptel::Hardware) perl(Zaptel::Hardware::PCI) perl(Zaptel::Hardware::USB) perl(Zaptel::Span) perl(Zaptel::Utils) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Line) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl-zapata = 1.4.12.1-15.mga8 perl-zapata(x86-64) = 1.4.12.1-15.mga8 zapata-perl = 1.4.12.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl(Zaptel::Chans) perl(Zaptel::Hardware) perl(Zaptel::Hardware::PCI) perl(Zaptel::Hardware::USB) perl(Zaptel::Span) perl(Zaptel::Utils) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Line) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl(strict) perl-base >= 2:5.32.0 Processing files: zapata-debugsource-1.4.12.1-15.mga8.x86_64 Provides: zapata-debugsource = 1.4.12.1-15.mga8 zapata-debugsource(x86-64) = 1.4.12.1-15.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: zapata-debuginfo-1.4.12.1-15.mga8.x86_64 Provides: debuginfo(build-id) = 01d83a6913dcd49b21a45d0f80dc5cf6c8a49b71 debuginfo(build-id) = 52cda48847b9a91754bb008b643d69e7c03be4a8 debuginfo(build-id) = 7958d7f274210a1bee967bc2cfe00e724e58e8e7 debuginfo(build-id) = b87e778e65dbb6dc7128b9cd6f617c7ed70f8c28 debuginfo(build-id) = b89eb725064fb666344aef6b0799294d44ed5536 debuginfo(build-id) = ca29a8b603d3f639e036e5e6e724650daec58bff zapata-debuginfo = 1.4.12.1-15.mga8 zapata-debuginfo(x86-64) = 1.4.12.1-15.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: zapata-debugsource(x86-64) = 1.4.12.1-15.mga8 Processing files: lib64zap1-debuginfo-1.4.12.1-15.mga8.x86_64 Provides: debuginfo(build-id) = 5f8fbbac4cb41ac3864f84f47590b2fd0f30947a lib64zap1-debuginfo = 1.4.12.1-15.mga8 lib64zap1-debuginfo(x86-64) = 1.4.12.1-15.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: zapata-debugsource(x86-64) = 1.4.12.1-15.mga8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 Wrote: /home/iurt/rpmbuild/RPMS/x86_64/lib64zap-devel-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/lib64zap1-debuginfo-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/perl-zapata-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/zapata-debugsource-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/lib64zap1-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/zapata-debuginfo-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/zapata-1.4.12.1-15.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/zapata-firmware-1.4.12.1-15.mga8.x86_64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.4gBGNF + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd zaptel-1.4.12.1 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga8.x86_64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.et6ADH + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf zaptel-1.4.12.1 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!