D: [iurt_root_command] chroot Installing /home/iurt/rpmbuild/SRPMS/perl-Time-HiRes-1.976.400-1.mga8.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.iP6ZXa + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf Time-HiRes-1.9760 + /usr/bin/tar -xof - + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/Time-HiRes-1.9760.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd Time-HiRes-1.9760 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (Time-HiRes-1.9760-Upgrade-to-1.9764.patch):' Patch #0 (Time-HiRes-1.9760-Upgrade-to-1.9764.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file HiRes.pm patching file HiRes.xs patching file Makefile.PL patching file t/Watchdog.pm patching file t/alarm.t patching file t/clock.t patching file t/gettimeofday.t patching file t/itimer.t patching file t/nanosleep.t patching file t/sleep.t patching file t/stat.t patching file t/time.t patching file t/ualarm.t patching file t/usleep.t patching file t/utime.t patching file typemap + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.RIBqDa + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd Time-HiRes-1.9760 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Configuring Time::HiRes... Using hints hints/linux.pl... Extra libraries: -lrt... Have syscall()... looking for syscall.h... found . Looking for gettimeofday()... found. Looking for setitimer()... found. Looking for getitimer()... found. You have interval timers (both setitimer and getitimer). Looking for ualarm()... found. Looking for usleep()... found. Looking for nanosleep()... believing $Config{d_nanosleep}... found. You can mix subsecond sleeps with signals, if you want to. (It's still not portable, though.) Looking for clockid_t... found. Looking for clock_gettime()... found. Looking for clock_getres()... found. Looking for clock_nanosleep()... found. Looking for clock()... found. Looking for working futimens()... found. Looking for working utimensat()... found. You seem to have subsecond timestamp setting. Looking for stat() subsecond timestamps... Trying struct stat st_atimespec.tv_nsec...NOT found. Trying struct stat st_atimensec...NOT found. Trying struct stat st_atime_n...NOT found. Trying struct stat st_atim.tv_nsec...found. Trying struct stat st_uatime...NOT found. You seem to have subsecond timestamp reading. (Your struct stat has them, but the filesystems must help.) Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Time::HiRes Writing MYMETA.yml and MYMETA.json Now you may issue 'make'. Do not forget also 'make test'. + /usr/bin/make -O -j8 V=1 VERBOSE=1 Running Mkbootstrap for HiRes () chmod 644 "HiRes.bs" "/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- HiRes.bs blib/arch/auto/Time/HiRes/HiRes.bs 644 cp HiRes.pm blib/lib/Time/HiRes.pm "/usr/bin/perl5.32.0" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/home/iurt/rpmbuild/BUILD/Time-HiRes-1.9760/typemap' HiRes.xs > HiRes.xsc mv HiRes.xsc HiRes.c x86_64-mageia-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.9764\" -DXS_VERSION=\"1.9764\" -fPIC "-I/usr/lib64/perl5/CORE" -DTIME_HIRES_NANOSLEEP -DTIME_HIRES_CLOCKID_T -DTIME_HIRES_CLOCK_GETTIME -DTIME_HIRES_CLOCK_GETRES -DTIME_HIRES_CLOCK_NANOSLEEP -DTIME_HIRES_CLOCK -DHAS_FUTIMENS -DHAS_UTIMENSAT -DTIME_HIRES_UTIME -DTIME_HIRES_STAT_XTIM -DTIME_HIRES_STAT=4 -DUSE_PPPORT_H HiRes.c rm -f blib/arch/auto/Time/HiRes/HiRes.so LD_RUN_PATH="/usr/lib" x86_64-mageia-linux-gnu-gcc -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -L/usr/local/lib64 -fstack-protector-strong HiRes.o -o blib/arch/auto/Time/HiRes/HiRes.so \ -lrt -lperl \ chmod 755 blib/arch/auto/Time/HiRes/HiRes.so Manifying 1 pod document + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.J3zI38 + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 + cd Time-HiRes-1.9760 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 'INSTALL=/usr/bin/install -p' "/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- HiRes.bs blib/arch/auto/Time/HiRes/HiRes.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/vendor_perl/auto/Time/HiRes/HiRes.so Installing /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/vendor_perl/Time/HiRes.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/man/man3/Time::HiRes.3pm Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/perllocal.pod + /usr/lib/rpm/find-debuginfo.sh -j96 --strict-build-id -m -i --build-id-seed 1.976.400-1.mga8 --unique-debug-suffix -1.976.400-1.mga8.x86_64 --unique-debug-src-base perl-Time-HiRes-1.976.400-1.mga8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Time-HiRes-1.9760 explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/vendor_perl/auto/Time/HiRes/HiRes.so extracting debug info from /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/vendor_perl/auto/Time/HiRes/HiRes.so objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/vendor_perl/auto/Time/HiRes/HiRes.so'; reason: Permission denied objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/lib64/perl5/vendor_perl/auto/Time/HiRes/HiRes.so'; reason: Permission denied original debug info size: 140kB, size after compression: 140kB /usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 277 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.m7eI17 + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd Time-HiRes-1.9760 + '[' 1 -eq 1 ']' + make test "/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- HiRes.bs blib/arch/auto/Time/HiRes/HiRes.bs 644 PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/alarm.t ......... ok t/clock.t ......... ok t/gettimeofday.t .. ok t/itimer.t ........ ok t/nanosleep.t ..... ok t/sleep.t ......... ok t/stat.t .......... ok t/time.t .......... ok t/tv_interval.t ... ok t/ualarm.t ........ ok t/usleep.t ........ ok t/utime.t ......... ok All tests successful. Files=12, Tests=118, 30 wallclock secs ( 0.13 usr 0.02 sys + 15.47 cusr 0.11 csys = 15.73 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-Time-HiRes-1.976.400-1.mga8.x86_64 Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FzBlS6 + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd Time-HiRes-1.9760 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + cp -pr MYMETA.yml /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + cp -pr TODO /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64/usr/share/doc/perl-Time-HiRes + RPM_EC=0 ++ jobs -p + exit 0 Provides: perl(Time::HiRes) = 1.976.400 perl-Time-HiRes = 1:1.976.400-1.mga8 perl-Time-HiRes(x86-64) = 1:1.976.400-1.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.6)(64bit) libperl.so.5.32()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.2.5)(64bit) perl(Carp) perl(Config) perl(Exporter) perl(ExtUtils::MakeMaker) perl(File::Spec) perl(XSLoader) perl(strict) perl-base >= 2:5.32.0 Processing files: perl-Time-HiRes-debugsource-1.976.400-1.mga8.x86_64 Provides: perl-Time-HiRes-debugsource = 1:1.976.400-1.mga8 perl-Time-HiRes-debugsource(x86-64) = 1:1.976.400-1.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-Time-HiRes-debuginfo-1.976.400-1.mga8.x86_64 Provides: debuginfo(build-id) = ef49943b7299e2e6e17eadbeda1d8b0a5e7c771e perl-Time-HiRes-debuginfo = 1:1.976.400-1.mga8 perl-Time-HiRes-debuginfo(x86-64) = 1:1.976.400-1.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: perl-Time-HiRes-debugsource(x86-64) = 1:1.976.400-1.mga8 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 Wrote: /home/iurt/rpmbuild/RPMS/x86_64/perl-Time-HiRes-debuginfo-1.976.400-1.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/perl-Time-HiRes-1.976.400-1.mga8.x86_64.rpm Wrote: /home/iurt/rpmbuild/RPMS/x86_64/perl-Time-HiRes-debugsource-1.976.400-1.mga8.x86_64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.jrLQua + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd Time-HiRes-1.9760 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Time-HiRes-1.976.400-1.mga8.x86_64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.14i3w8 + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf Time-HiRes-1.9760 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!