D: [iurt_root_command] chroot
warning: %make is deprecated, use %make_build instead
Installing /home/iurt/rpmbuild/SRPMS/perl-Sys-SigAction-0.230.0-3.mga8.src.rpm
Building target platforms: x86_64
Building for target x86_64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.lQ99nJ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Sys-SigAction-0.23
+ /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/Sys-SigAction-0.23.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Sys-SigAction-0.23
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.kAd8RH
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-SigAction-0.23
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
 
   NOTE: This perl has multithread support enabled, this is not a problem for
   single threaded perl applications.
   
   Please see "MULTITHREAD PERL" in the Sys::SigAction POD for more information.

OS= linux
archname = x86_64-linux-thread-multi
Checking for Microsoft Windows... (not supported)
Checking for multi-threaded Perl... (warning)
Checking support for signals... (required)... OK
Checking support for POSIX::sigaction... (required)... OK
Checking for arm platforms... OK
Checking for cygwin... (masking signals is broken on some versions at least)... OK
Writing lib/Sys/SigAction/Alarm.pm
Looking for Time::HiRes with a working ualarm()... 
Testing Time::HiRes::ualarm()...
 

   Time::HiRes::ualarm() exists and works.
   High resolution timeouts enabled." 

Wrote lib/Sys/SigAction/Alarm.pm
MakeMaker version = 7.44
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Sys::SigAction
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8
cp lib/Sys/SigAction/Alarm.pm blib/lib/Sys/SigAction/Alarm.pm
cp lib/Sys/SigAction.pm blib/lib/Sys/SigAction.pm
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.aikJYG
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64
+ cd Sys-SigAction-0.23
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/perl5/vendor_perl/Sys/SigAction.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/perl5/vendor_perl/Sys/SigAction/Alarm.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/man/man3/Sys::SigAction.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j96 --strict-build-id -m -i --build-id-seed 0.230.0-3.mga8 --unique-debug-suffix -0.230.0-3.mga8.x86_64 --unique-debug-src-base perl-Sys-SigAction-0.230.0-3.mga8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Sys-SigAction-0.23

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.bTpDAH
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-SigAction-0.23
+ '[' 1 -eq 1 ']'
+ /usr/bin/make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/alternatives.t ...... ok
t/inline_nested.t ..... ok
t/mask.t .............. ok
t/name.t .............. ok
t/number.t ............ ok
t/recursive_nested.t .. ok

         
     NOTE: Setting safe=>1... with masked signals does not seem to work.
     The problem is that the masked signals are not masked when safe=>1.
     When safe=>0 they are.  

     If you have an application for safe=>1 and can come up with a patch
     for this module that gets this test working, or a patch to the test
     that shows how to fix it, please send it to me. 

     See the block below this one... which if executed would test safe mode
     with masked signals... it is a clone of part of mask.t that proves this
     is broken.

     This test can be executed from the command line as follows:

         SAFE_T=1 perl -Ilib t/safe.t

     Lincoln

     

t/safe.t .............. ok
# delta time was 0.100217, timer was for 0.1 secconds
t/timeout.t ........... ok
All tests successful.
Files=8, Tests=87, 10 wallclock secs ( 0.10 usr  0.00 sys +  0.73 cusr  0.12 csys =  0.95 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Sys-SigAction-0.230.0-3.mga8.noarch
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.b0zwlJ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-SigAction-0.23
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ cp -pr MYMETA.yml /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64/usr/share/doc/perl-Sys-SigAction
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Sys::SigAction) = 0.230.0 perl(Sys::SigAction::Alarm) perl-Sys-SigAction = 0.230.0-3.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl >= 0:5.005 perl(Config) perl(Exporter) perl(POSIX) perl(Sys::SigAction::Alarm) perl(Test::More) perl(constant) perl(strict) perl(vars) perl(warnings) perl-base >= 2:5.32.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64
Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-Sys-SigAction-0.230.0-3.mga8.noarch.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.pbx4hH
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-SigAction-0.23
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Sys-SigAction-0.230.0-3.mga8.x86_64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.Ky9NPJ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Sys-SigAction-0.23
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!