D: [iurt_root_command] chroot
warning: %make is deprecated, use %make_build instead
Installing /home/iurt/rpmbuild/SRPMS/perl-Mail-MboxParser-0.550.0-12.mga8.src.rpm
Building target platforms: x86_64
Building for target x86_64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.2fqKvZ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Mail-MboxParser-0.55
+ /usr/bin/bzip2 -dc /home/iurt/rpmbuild/SOURCES/Mail-MboxParser-0.55.tar.bz2
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Mail-MboxParser-0.55
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ /usr/bin/cat /home/iurt/rpmbuild/SOURCES/perl-Mail-MboxParser-0.55-Fix-garbled-attachment-name-RT-66576.patch
+ /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.G1ysWX
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Mail-MboxParser-0.55
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
*******************
You don't have Mail::Mbox::MessageParser installed. If you want to get
significantly faster parsing, you should install this module from the CPAN.

If you do so, you are advised to do it before issuing 'make test' on this
module because otherwise the new parsing routines can't be tested on your
platform.
*******************
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Mail::MboxParser
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8
cp MboxParser.pm blib/lib/Mail/MboxParser.pm
cp MboxParser/Mail.pm blib/lib/Mail/MboxParser/Mail.pm
cp MboxParser/Mail/Body.pm blib/lib/Mail/MboxParser/Mail/Body.pm
cp MboxParser/Mail/Convertable.pm blib/lib/Mail/MboxParser/Mail/Convertable.pm
cp MboxParser/Base.pm blib/lib/Mail/MboxParser/Base.pm
Manifying 5 pod documents
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.OBeu5Y
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64
+ cd Mail-MboxParser-0.55
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64 'INSTALL=/usr/bin/install -p'
Manifying 5 pod documents
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/perl5/vendor_perl/Mail/MboxParser.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/perl5/vendor_perl/Mail/MboxParser/Mail.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/perl5/vendor_perl/Mail/MboxParser/Base.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/perl5/vendor_perl/Mail/MboxParser/Mail/Body.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/perl5/vendor_perl/Mail/MboxParser/Mail/Convertable.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/man/man3/Mail::MboxParser::Mail::Convertable.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/man/man3/Mail::MboxParser::Base.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/man/man3/Mail::MboxParser::Mail::Body.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/man/man3/Mail::MboxParser.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/man/man3/Mail::MboxParser::Mail.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j96 --strict-build-id -m -i --build-id-seed 0.550.0-12.mga8 --unique-debug-suffix -0.550.0-12.mga8.x86_64 --unique-debug-src-base perl-Mail-MboxParser-0.550.0-12.mga8.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Mail-MboxParser-0.55

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.C5VT8W
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Mail-MboxParser-0.55
+ '[' 1 -eq 1 ']'
+ /usr/bin/make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/0_pod.t ............... skipped: Test::Pod not installed
t/0_pod_coverage.t ...... skipped: Test::Pod::Coverage not installed
t/10_qpnames.t .......... ok
t/1_mmb.t ............... ok
t/2_for.t ............... ok
t/3_while.t ............. ok
t/4_index.t ............. ok
t/5_body.t .............. ok
t/6_autoload.t .......... ok
t/7_attach.t ............ ok
t/8_from_trace.t ........ ok
t/9_direct_invok.t ...... ok
t/old_1_mmb.t ........... ok
t/old_2_for.t ........... ok
t/old_3_while.t ......... ok
t/old_4_index.t ......... ok
t/old_5_body.t .......... ok
t/old_6_autoload.t ...... ok
t/old_7_attach.t ........ ok
t/old_8_from_trace.t .... ok
t/old_9_direct_invok.t .. ok
All tests successful.
Files=21, Tests=289,  3 wallclock secs ( 0.13 usr  0.03 sys +  2.09 cusr  0.26 csys =  2.51 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Mail-MboxParser-0.550.0-12.mga8.noarch
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.fAy4CZ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Mail-MboxParser-0.55
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/doc/perl-Mail-MboxParser
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/doc/perl-Mail-MboxParser
+ cp -pr Changelog /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/doc/perl-Mail-MboxParser
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64/usr/share/doc/perl-Mail-MboxParser
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Mail::MboxParser) = 0.550.0 perl(Mail::MboxParser::Base) = 0.70.0 perl(Mail::MboxParser::Mail) = 0.450.0 perl(Mail::MboxParser::Mail::Body) = 0.150.0 perl(Mail::MboxParser::Mail::Convertable) = 0.60.0 perl-Mail-MboxParser = 0.550.0-12.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl >= 0:5.004 perl(Carp) perl(Exporter) perl(File::Temp) perl(IO::Seekable) perl(MIME::Words) perl(Mail::MboxParser::Base) perl(Mail::MboxParser::Mail) perl(Mail::MboxParser::Mail::Body) perl(Mail::MboxParser::Mail::Convertable) perl(Symbol) perl(base) perl(constant) perl(overload) perl(strict) perl(vars) perl-base >= 2:5.32.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64
Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-Mail-MboxParser-0.550.0-12.mga8.noarch.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.gY7Z3Z
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Mail-MboxParser-0.55
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Mail-MboxParser-0.550.0-12.mga8.x86_64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FFWuTW
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Mail-MboxParser-0.55
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!