D: [iurt_root_command] chroot warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. Installing /home/iurt/rpmbuild/SRPMS/zapata-1.4.12.1-15.mga9.src.rpm Building target platforms: aarch64 Building for target aarch64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.lCM2qx + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf zaptel-1.4.12.1 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/zaptel-1.4.12.1.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd zaptel-1.4.12.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (zaptel-1.4.12.1-printf.diff):' Patch #0 (zaptel-1.4.12.1-printf.diff): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .fprintf --fuzz=0 patching file ztcfg.c + echo 'Patch #1 (zaptel-1.4.12.1-makefile.diff):' Patch #1 (zaptel-1.4.12.1-makefile.diff): + /usr/bin/patch --no-backup-if-mismatch -f -p1 -b --suffix .kernel --fuzz=0 patching file Makefile + echo 'Patch #2 (zaptel-1.4.12.1-firmware.diff):' Patch #2 (zaptel-1.4.12.1-firmware.diff): + /usr/bin/patch --no-backup-if-mismatch -f -p0 -b --suffix .firmware --fuzz=0 patching file Makefile + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/autoconf.h . + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz -C ./firmware/ zaptel-fw-oct6114-064.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz -C ./firmware/ zaptel-fw-oct6114-128.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz -C ./firmware/ zaptel-fw-tc400m.bin + for i in /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-064-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-oct6114-128-1.05.01.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-tc400m-MR6.12.tar.gz /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz + install -Dpm 644 /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz firmware/ + tar -xvf /home/iurt/rpmbuild/SOURCES/zaptel-fw-vpmadt032-1.07.tar.gz -C ./firmware/ zaptel-fw-vpmadt032.bin + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.NjEzyJ + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd zaptel-1.4.12.1 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + CFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables ' + export FCFLAGS + LDFLAGS=' -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CONFIGURE_TOP=. + '[' 1 = 1 ']' ++ find . -name config.guess -o -name config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./menuselect/config.guess + '[' -f /usr/lib/rpm/mageia/config.guess ']' ++ basename ./menuselect/config.guess + cp -af /usr/lib/rpm/mageia/config.guess ./menuselect/config.guess + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./menuselect/config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./menuselect/config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./menuselect/config.sub + for i in $(find ${CONFIGURE_TOP} -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/mageia/config.sub ']' ++ basename ./config.sub + cp -af /usr/lib/rpm/mageia/config.sub ./config.sub + /usr/lib/rpm/mageia/force-as-needed-for-shared-lib-in-libtool Forcing -Wl,--as-needed in configure/libtool to workaround libtool bug (cf http://lists.gnu.org/archive/html/libtool-patches/2004-06/msg00002.html) + /usr/lib/rpm/mageia/drop-ld-no-undefined-for-shared-lib-modules-in-libtool + /usr/lib/rpm/mageia/fix-libtool-ltmain-from-overlinking + /usr/lib/rpm/mageia/fix-libtool-from-moving-options-after-libs . + /usr/lib/rpm/mageia/fix-dlsearch-path-in-libtool-for-multilib . lib64 + ./configure --host=aarch64-mageia-linux-gnu --build=aarch64-mageia-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking for aarch64-mageia-linux-gnu-gcc... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking for GNU make... make checking for grep... /usr/bin/grep checking for sh... /bin/sh checking for ln... /usr/bin/ln checking for wget... /usr/bin/wget checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for newtBell in -lnewt... no checking for usb_init in -lusb... no configure: creating ./config.status config.status: creating build_tools/menuselect-deps config.status: creating makeopts config.status: creating build_tools/make_firmware_object configure: *** Zaptel build successfully configured *** + /usr/bin/make -O -j8 V=1 VERBOSE=1 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf"' prefix=/usr libdir=/usr/lib64 Generating input for menuselect ... make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for GNU make... make checking for asprintf... yes checking for getloadavg... yes checking for setenv... yes checking for strcasestr... yes checking for strndup... yes checking for strnlen... yes checking for strsep... yes checking for strtoq... yes checking for unsetenv... yes checking for vasprintf... yes checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking for initscr in -lncurses... yes checking for curses.h... (cached) yes checking for pkg-config... pkg-config Package gtk+-2.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `gtk+-2.0.pc' to the PKG_CONFIG_PATH environment variable Package 'gtk+-2.0', required by 'virtual:world', not found configure: creating ./config.status config.status: creating makeopts config.status: creating autoconfig.h configure: configuring in mxml configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' 'LDFLAGS=-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags' --cache-file=/dev/null --srcdir=. checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for cp... /usr/bin/cp checking for ln... /usr/bin/ln checking for mkdir... /usr/bin/mkdir checking for nroff... no checking for groff... no checking for rm... /usr/bin/rm checking for strdup... yes checking for vsnprintf... yes configure: creating ./config.status config.status: creating Makefile config.status: creating mxml.list config.status: creating mxml.pc config.status: creating config.h configure: Menuselect build configuration successfully completed make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o strcompat.o strcompat.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-attr.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-entity.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-search.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-index.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-node.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-private.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-string.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-set.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o menuselect_curses.o menuselect_curses.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o menuselect.o menuselect.c : warning: ISO C99 requires whitespace after the macro name menuselect.c: In function 'generate_makeopts_file': menuselect.c:1027:41: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 1027 | system(rmcommand); | ^~~~~~~~~~~~~~~~~ menuselect.c:1037:33: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 1037 | system(rmcommand); | ^~~~~~~~~~~~~~~~~ make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c mxml-file.c : warning: ISO C99 requires whitespace after the macro name make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[3]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' /usr/bin/rm -f libmxml.a /usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o a - mxml-attr.o a - mxml-entity.o a - mxml-file.o a - mxml-index.o a - mxml-node.o a - mxml-search.o a - mxml-set.o a - mxml-private.o a - mxml-string.o ranlib libmxml.a make[3]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect/mxml' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o mxml/libmxml.a mxml/libmxml.a -lncurses make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/menuselect' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o zonedata.o zonedata.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -c -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zonedata.lo zonedata.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztspeed.o -c ztspeed.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' Building FXO modes from: ../../wctdm.c ../../fxo_modes.h perl -n -e 'print if (/^static struct fxo_mode {$/ .. /};$/)' ../../wctdm.c ../../fxo_modes.h >wctdm_fxomodes.h || rm -f wctdm_fxomodes.h make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zttest.o -c zttest.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztspeed ztspeed.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o zttest zttest.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztscan.o -c ztscan.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' for i in zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware; do perl -I./zconf -c $i || exit 1; done zt_registration syntax OK xpp_sync syntax OK lszaptel syntax OK xpp_blink syntax OK zapconf syntax OK zaptel_hardware syntax OK touch perlcheck make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztscan ztscan.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -c -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o tonezone.lo tonezone.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -c -o tonezone.o tonezone.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' ar rcs libtonezone.a zonedata.o tonezone.o ranlib libtonezone.a make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -shared -Wl,-soname,libtonezone.so.1.0 -o libtonezone.so zonedata.lo tonezone.lo -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztmonitor.o -c ztmonitor.c : warning: ISO C99 requires whitespace after the macro name ztmonitor.c: In function 'main': ztmonitor.c:633:33: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 633 | write(afd, buf_tx, res_brx << 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ztmonitor.c:635:33: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 635 | write(afd, buf_brx, res_brx); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zt_registration > zt_registration.8 || rm -f zt_registration.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 xpp_sync > xpp_sync.8 || rm -f xpp_sync.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztmonitor ztmonitor.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 lszaptel > lszaptel.8 || rm -f lszaptel.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 xpp_blink > xpp_blink.8 || rm -f xpp_blink.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zapconf > zapconf.8 || rm -f zapconf.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' cc -o print_modes -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" print_modes.c : warning: ISO C99 requires whitespace after the macro name make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' ./print_modes >init_fxo_modes make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' pod2man --section 8 zaptel_hardware > zaptel_hardware.8 || rm -f zaptel_hardware.8 make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o fxotune.o -c fxotune.c : warning: ISO C99 requires whitespace after the macro name fxotune.c: In function 'fxotune_read': fxotune.c:115:17: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 115 | write(audio_dump_fd, buffer, len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o fxotune fxotune.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztcfg.o -c ztcfg.c : warning: ISO C99 requires whitespace after the macro name make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' gcc -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fPIC -DPIC -D_REENTRANT -Iinclude -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG="zaptel.conf" -DCONFIG_FILENAME"zaptel.conf" -o ztcfg ztcfg.o libtonezone.a -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -lm make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.nC9BC0 + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 + cd zaptel-1.4.12.1 + '[' 1 -eq 1 ']' + install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64//etc/rc.d/init.d + install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64//etc + install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/sysconfig + install -m0644 zaptel.conf.sample /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64//etc/zaptel.conf + install -m0755 zaptel.init /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64//etc/rc.d/init.d/zaptel + install -m0644 zaptel.sysconfig /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/sysconfig/zaptel + rm -rf /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 'INSTALL=/usr/bin/install -p' libdir=/usr/lib64 includedir=/usr/include PERLLIBDIR=/usr/share/perl5/vendor_perl make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' make[2]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1' mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/ctl rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/channel rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/pseudo rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/timer rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/transcode rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/253 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/252 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/251 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/250 N=1; \ while [ $N -lt 250 ]; do \ rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/dev/zap/$N; \ N=$[$N+1]; \ done [ `id -u` = 0 ] && /sbin/depmod -a 5.10.16-server-1.mga8 || : make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/sbin /usr/bin/install -p genzaptelconf zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/sbin/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/zaptel /usr/bin/install -p -m 644 ../firmwares/FPGA_1141.hex ../firmwares/FPGA_1151.hex ../firmwares/FPGA_FXS.hex ../firmwares/USB_FW.hex init_fxo_modes /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/zaptel/ /usr/bin/install -p ../init_card_1_30 ../init_card_2_30 ../init_card_3_30 ../init_card_4_30 xpp_fxloader /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/zaptel/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/man/man8 /usr/bin/install -p -m 644 genzaptelconf.8 zt_registration.8 xpp_sync.8 lszaptel.8 xpp_blink.8 zapconf.8 zaptel_hardware.8 /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/man/man8/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/hotplug/usb /usr/bin/install -p -m 644 xpp_fxloader.usermap /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/hotplug/usb/ # for backward compatibility and for hotplug users: ln -sf /usr/share/zaptel/xpp_fxloader /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/hotplug/usb/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/udev/rules.d /usr/bin/install -p -m 644 xpp.rules /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/udev/rules.d/ /usr/bin/install -p -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/perl5/vendor_perl for i in Zaptel Zaptel/Hardware Zaptel/Config Zaptel/Xpp; \ do \ /usr/bin/install -p -d "/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/perl5/vendor_perl/$i"; \ done for i in Zaptel.pm Zaptel/Chans.pm Zaptel/Hardware.pm Zaptel/Span.pm Zaptel/Utils.pm Zaptel/Xpp.pm Zaptel/Hardware/PCI.pm Zaptel/Hardware/USB.pm Zaptel/Config/Defaults.pm Zaptel/Xpp/Line.pm Zaptel/Xpp/Xbus.pm Zaptel/Xpp/Xpd.pm; \ do \ /usr/bin/install -p -m 644 "zconf/$i" "/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/perl5/vendor_perl/$i"; \ done make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/kernel/xpp/utils' install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin install fxotune ztcfg ztmonitor ztspeed zttest ztscan /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/ install -d /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/man/man8 install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/share/man/man8/ /usr/bin/install -p -D -m 644 zaptel.conf.sample /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/zaptel.conf /usr/bin/install -p -D -m 755 libtonezone.a /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib64/libtonezone.a /usr/bin/install -p -D -m 755 libtonezone.so /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib64/libtonezone.so.1.0 rm -f /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib64libtonezone.so /usr/bin/ln -sf libtonezone.so.1.0 \ /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib64/libtonezone.so.1 /usr/bin/ln -sf libtonezone.so.1.0 \ /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib64/libtonezone.so /usr/bin/install -p -D -m 644 kernel/zaptel.h /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/include/zaptel/zaptel.h /usr/bin/install -p -D -m 644 tonezone.h /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/include/zaptel/tonezone.h /usr/bin/make -C firmware hotplug-install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 HOTPLUG_FIRMWARE=yes make[1]: Entering directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/firmware' mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib/hotplug/firmware mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/lib/firmware Installing zaptel-fw-oct6114-064.bin to hotplug firmware directories Installing zaptel-fw-oct6114-128.bin to hotplug firmware directories Installing zaptel-fw-tc400m.bin to hotplug firmware directories Installing zaptel-fw-vpmadt032.bin to hotplug firmware directories make[1]: Leaving directory '/home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1/firmware' ################################################### ### ### Zaptel installed successfully. ### If you have not done so before, install init scripts with: ### ### make config ### ################################################### + mkdir -p /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib + mv /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/etc/udev /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib/ + find /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 -name '*.a' -delete + /usr/bin/find-debuginfo -j8 --strict-build-id -m -i --build-id-seed 1.4.12.1-15.mga9 --unique-debug-suffix -1.4.12.1-15.mga9.aarch64 --unique-debug-src-base zapata-1.4.12.1-15.mga9.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/zaptel-1.4.12.1 extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/fxotune extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/ztcfg extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/ztmonitor extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/ztscan extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/ztspeed extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/usr/lib64/libtonezone.so.1.0 extracting debug info from /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64/sbin/zttest dwz: ./sbin/fxotune-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: ./sbin/ztcfg-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: ./sbin/ztmonitor-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: ./sbin/ztscan-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: ./sbin/ztspeed-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: ./sbin/zttest-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: ./usr/lib64/libtonezone.so.1.0-1.4.12.1-15.mga9.aarch64.debug: Unknown debugging section .debug_line_str dwz: Too few files for multifile optimization original debug info size: 308kB, size after compression: 308kB /usr/bin/sepdebugcrcfix: Updated 0 CRC32s, 7 CRC32s did match. 432 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 0 + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/share/zaptel/xpp_fxloader from /bin/bash to #!/usr/bin/bash mangling shebang in /usr/sbin/genzaptelconf from /bin/bash to #!/usr/bin/bash Processing files: zapata-1.4.12.1-15.mga9.aarch64 warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. Provides: zapata = 1.4.12.1-15.mga9 zapata(aarch-64) = 1.4.12.1-15.mga9 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh Requires(preun): /bin/sh Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.34)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libm.so.6(GLIBC_2.27)(64bit) libm.so.6(GLIBC_2.29)(64bit) perl(File::Basename) perl(Getopt::Std) perl(Zaptel) perl(Zaptel::Config::Defaults) perl(Zaptel::Hardware) perl(Zaptel::Span) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl(strict) perl-base >= 2:5.34.0 Processing files: zapata-firmware-1.4.12.1-15.mga9.aarch64 Provides: zapata-firmware = 1.4.12.1-15.mga9 zapata-firmware(aarch-64) = 1.4.12.1-15.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: lib64zap1-1.4.12.1-15.mga9.aarch64 Provides: lib64zap1 = 1.4.12.1-15.mga9 lib64zap1(aarch-64) = 1.4.12.1-15.mga9 libtonezone.so.1.0()(64bit) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libm.so.6(GLIBC_2.29)(64bit) Processing files: lib64zap-devel-1.4.12.1-15.mga9.aarch64 Provides: lib64zap-devel = 1.4.12.1-15.mga9 lib64zap-devel(aarch-64) = 1.4.12.1-15.mga9 libzap-devel = 1.4.12.1 zapata-devel = 1.4.12.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-zapata-1.4.12.1-15.mga9.aarch64 warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. Provides: perl(Zaptel) perl(Zaptel::Chans) perl(Zaptel::Config::Defaults) perl(Zaptel::Hardware) perl(Zaptel::Hardware::PCI) perl(Zaptel::Hardware::USB) perl(Zaptel::Span) perl(Zaptel::Utils) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Line) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl-zapata = 1.4.12.1-15.mga9 perl-zapata(aarch-64) = 1.4.12.1-15.mga9 zapata-perl = 1.4.12.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl(Zaptel::Chans) perl(Zaptel::Hardware) perl(Zaptel::Hardware::PCI) perl(Zaptel::Hardware::USB) perl(Zaptel::Span) perl(Zaptel::Utils) perl(Zaptel::Xpp) perl(Zaptel::Xpp::Line) perl(Zaptel::Xpp::Xbus) perl(Zaptel::Xpp::Xpd) perl(strict) perl-base >= 2:5.34.0 Processing files: zapata-debugsource-1.4.12.1-15.mga9.aarch64 Provides: zapata-debugsource = 1.4.12.1-15.mga9 zapata-debugsource(aarch-64) = 1.4.12.1-15.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: zapata-debuginfo-1.4.12.1-15.mga9.aarch64 Provides: debuginfo(build-id) = 0270286e126b3905404f77904e3f4a5c34292305 debuginfo(build-id) = 7895dc667eadd8e34de2aab7a471ef7a8f8476e7 debuginfo(build-id) = 7d8e0f91b81c4b1cee40eda84eba1e3dcd79a76c debuginfo(build-id) = 7e806616b87dfc42757af782c08d870d8b643cff debuginfo(build-id) = 9de14d8d2355e68bd36c8a234638b59bcdfe2ed5 debuginfo(build-id) = a217c5a959d8cee96ed0e22211d53345fb82271f zapata-debuginfo = 1.4.12.1-15.mga9 zapata-debuginfo(aarch-64) = 1.4.12.1-15.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: zapata-debugsource(aarch-64) = 1.4.12.1-15.mga9 Processing files: lib64zap1-debuginfo-1.4.12.1-15.mga9.aarch64 Provides: debuginfo(build-id) = 3fe899262b9301809fe5227a7cb6f91adc326c81 lib64zap1-debuginfo = 1.4.12.1-15.mga9 lib64zap1-debuginfo(aarch-64) = 1.4.12.1-15.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: zapata-debugsource(aarch-64) = 1.4.12.1-15.mga9 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-zapata-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/lib64zap1-debuginfo-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/lib64zap-devel-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/lib64zap1-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/zapata-debugsource-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/zapata-debuginfo-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/zapata-1.4.12.1-15.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/zapata-firmware-1.4.12.1-15.mga9.aarch64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.gQqpK8 + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd zaptel-1.4.12.1 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/zapata-1.4.12.1-15.mga9.aarch64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.U7frLt + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf zaptel-1.4.12.1 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!