D: [iurt_root_command] chroot
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
warning: %make is deprecated, use %make_build instead
warning: %make is deprecated, use %make_build instead
Installing /home/iurt/rpmbuild/SRPMS/perl-List-BinarySearch-0.250.0-5.mga9.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.0Gqwng
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf List-BinarySearch-0.25
+ /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/List-BinarySearch-0.25.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd List-BinarySearch-0.25
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.saSc1u
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd List-BinarySearch-0.25
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor

List::BinarySearch::XS is not installed.

This module will provide a performance improvement.  Though it is not required
for proper operation, it is strongly recommended that this module be installed
unless the target environment is unable to compile XS modules.

Answering 'yes' to the following question will cause most CPAN installers to
pull in the List::BinarySearch::XS module automatically.  If you are doing a
manual installation you will probably need to install List::BinarySearch::XS
separately.

Would you like to install List::BinarySearch::XS? [y] y
Warning: prerequisite List::BinarySearch::XS 0 not found.
List::BinarySearch::XS has been added to the dependency list.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for List::BinarySearch
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8
cp lib/List/BinarySearch.pm blib/lib/List/BinarySearch.pm
cp lib/List/BinarySearch/PP.pm blib/lib/List/BinarySearch/PP.pm
Manifying 2 pod documents
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.wDgye9
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64
+ cd List-BinarySearch-0.25
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64 'INSTALL=/usr/bin/install -p'
Manifying 2 pod documents
Installing /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/perl5/vendor_perl/List/BinarySearch.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/perl5/vendor_perl/List/BinarySearch/PP.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/man/man3/List::BinarySearch::PP.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/man/man3/List::BinarySearch.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/bin/find-debuginfo -j8 --strict-build-id -m -i --build-id-seed 0.250.0-5.mga9 --unique-debug-suffix -0.250.0-5.mga9.aarch64 --unique-debug-src-base perl-List-BinarySearch-0.250.0-5.mga9.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/List-BinarySearch-0.25

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 0
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.w3G1KU
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd List-BinarySearch-0.25
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j8 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.34.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-boilerplate.t .......... skipped: Set $ENV{RELEASE_TESTING} to run boilerplate check.
t/01-manifest.t ............. skipped: Author tests not required for installation
t/02-pod.t .................. skipped: Test::Pod 1.22 required, and $ENV{RELEASE_TESTING} must be set for POD tests.
t/03-pod-coverage.t ......... skipped: Set $ENV{RELEASE_TESTING} to run POD coverage test.
t/04-perlcritic.t ........... skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/06-changes.t .............. skipped: Author tests skipped.  Set $ENV{RELEASE_TESTING} to run
t/07-kwalitee.t ............. skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/09-load-prereqs.t ......... ok
t/10-load-can.t ............. ok
t/11-search.t ............... ok
t/12-positional_searches.t .. ok
t/13-pp.t ................... ok
t/14-pp-isa.t ............... ok
Can't exec "perldoc": No such file or directory at t/15-xs-isa.t line 23.
Use of uninitialized value $path in pattern match (m//) at t/15-xs-isa.t line 24.
t/15-xs-isa.t ............... skipped: List::BinarySearch::XS must be installed for interoperability tests
t/16-coverage.t ............. ok
All tests successful.
Files=15, Tests=28,  2 wallclock secs ( 0.10 usr  0.02 sys +  2.02 cusr  0.34 csys =  2.48 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-List-BinarySearch-0.250.0-5.mga9.noarch
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.jkYrmS
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd List-BinarySearch-0.25
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/doc/perl-List-BinarySearch
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/doc/perl-List-BinarySearch
+ cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/doc/perl-List-BinarySearch
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/doc/perl-List-BinarySearch
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/doc/perl-List-BinarySearch
+ cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64/usr/share/doc/perl-List-BinarySearch
+ RPM_EC=0
++ jobs -p
+ exit 0
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
Provides: perl(List::BinarySearch) = 0.250.0 perl(List::BinarySearch::PP) = 0.250.0 perl-List-BinarySearch = 0.250.0-5.mga9
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl >= 0:5.006000 perl >= 0:5.008000 perl(Carp) perl(Exporter) perl(Scalar::Util) perl(strict) perl(warnings) perl-base >= 2:5.34.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-List-BinarySearch-0.250.0-5.mga9.noarch.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.uUbOtA
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd List-BinarySearch-0.25
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-List-BinarySearch-0.250.0-5.mga9.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.Yiuw6r
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf List-BinarySearch-0.25
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!