D: [iurt_root_command] chroot warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. Installing /home/iurt/rpmbuild/SRPMS/perl-GSSAPI-0.280.0-25.mga9.src.rpm Building target platforms: aarch64 Building for target aarch64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.4VWyle + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf GSSAPI-0.28 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/GSSAPI-0.28.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd GSSAPI-0.28 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.tU8NbB + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd GSSAPI-0.28 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor Welcome to GSSAPI.pm setup! (Makefile.PL Version 0.03) run "perl Makefile.PL --help" to see further installation options ---------------------------------------------------------- Searching krb5-config command... using krb5-config command '/usr/bin/krb5-config'. ---------------------------------------------------------- using GSSAPI implementation Kerberos 5 release 1.19.2 ---------------------------------------------------------- Using LIBS -L/usr/lib64 -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err ---------------------------------------------------------- Using INC includeconfiguration ---------------------------------------------------------- Checking if your kit is complete... Looks good Invalid LICENSE value 'perl' ignored Generating a Unix-style Makefile Writing Makefile for GSSAPI Writing MYMETA.yml and MYMETA.json + /usr/bin/make -O -j8 V=1 VERBOSE=1 'OPTIMIZE=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables' Running Mkbootstrap for GSSAPI () chmod 644 "GSSAPI.bs" "/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- GSSAPI.bs blib/arch/auto/GSSAPI/GSSAPI.bs 644 cp GSSAPI.pm blib/lib/GSSAPI.pm cp GSSAPI/OID/Set.pm blib/lib/GSSAPI/OID/Set.pm cp GSSAPI/OID.pm blib/lib/GSSAPI/OID.pm cp GSSAPI/Status.pm blib/lib/GSSAPI/Status.pm "/usr/bin/perl5.34.0" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/home/iurt/rpmbuild/BUILD/GSSAPI-0.28/typemap' GSSAPI.xs > GSSAPI.xsc mv GSSAPI.xsc GSSAPI.c gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -DVERSION=\"0.28\" -DXS_VERSION=\"0.28\" -fPIC "-I/usr/lib64/perl5/CORE" GSSAPI.c rm -f blib/arch/auto/GSSAPI/GSSAPI.so gcc -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -L/usr/local/lib -fstack-protector-strong GSSAPI.o -o blib/arch/auto/GSSAPI/GSSAPI.so \ -L/usr/lib64 -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lperl \ chmod 755 blib/arch/auto/GSSAPI/GSSAPI.so Manifying 4 pod documents + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.gc9zdv + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 + cd GSSAPI-0.28 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 'INSTALL=/usr/bin/install -p' "/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- GSSAPI.bs blib/arch/auto/GSSAPI/GSSAPI.bs 644 Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/GSSAPI/GSSAPI.so Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/GSSAPI.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/GSSAPI/Status.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/GSSAPI/OID.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/GSSAPI/OID/Set.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/man/man3/GSSAPI::Status.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/man/man3/GSSAPI::OID::Set.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/man/man3/GSSAPI::OID.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/man/man3/GSSAPI.3pm Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/perllocal.pod + /usr/bin/find-debuginfo -j8 --strict-build-id -m -i --build-id-seed 0.280.0-25.mga9 --unique-debug-suffix -0.280.0-25.mga9.aarch64 --unique-debug-src-base perl-GSSAPI-0.280.0-25.mga9.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/GSSAPI-0.28 extracting debug info from /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/GSSAPI/GSSAPI.so objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/GSSAPI/GSSAPI.so'; reason: Permission denied objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/GSSAPI/GSSAPI.so'; reason: Permission denied dwz: ./usr/lib64/perl5/vendor_perl/auto/GSSAPI/GSSAPI.so-0.280.0-25.mga9.aarch64.debug: Unknown debugging section .debug_line_str original debug info size: 200kB, size after compression: 200kB /usr/bin/sepdebugcrcfix: Updated 0 CRC32s, 1 CRC32s did match. 272 blocks + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 0 + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/brp-remove-la-files + /usr/lib/rpm/redhat/brp-mangle-shebangs Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.m4v1o6 + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd GSSAPI-0.28 + '[' 1 -eq 1 ']' + rm -f t/inquire_cred.t + /usr/bin/make -O -j8 V=1 VERBOSE=1 test "/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- GSSAPI.bs blib/arch/auto/GSSAPI/GSSAPI.bs 644 PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.34.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1constants.t ..... ok t/2status.t ........ ok t/checkoids.t ...... ok t/importnames.t .... ok # Kerberos 5, SPNEGO t/indicatemechs.t .. ok t/pod.t ............ skipped: Test::Pod 1.00 required for testing POD t/test.t ........... ok # # # if you want to run tests that do a realworld *use* of your GSSAPI # start a kinit and try to run # # ./examples/getcred_hostbased.pl # t/zbugfixes.t ...... ok All tests successful. Files=8, Tests=142, 1 wallclock secs ( 0.08 usr 0.01 sys + 1.19 cusr 0.12 csys = 1.40 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-GSSAPI-0.280.0-25.mga9.aarch64 Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.nzZ1Ks + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd GSSAPI-0.28 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/doc/perl-GSSAPI + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/doc/perl-GSSAPI + cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/doc/perl-GSSAPI + cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64/usr/share/doc/perl-GSSAPI + RPM_EC=0 ++ jobs -p + exit 0 warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend. Provides: perl(GSSAPI) = 0.280.0 perl(GSSAPI::OID) perl(GSSAPI::OID::Set) perl(GSSAPI::Status) perl-GSSAPI = 0.280.0-25.mga9 perl-GSSAPI(aarch-64) = 0.280.0-25.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.34)(64bit) libgssapi_krb5.so.2()(64bit) libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit) libperl.so.5.34()(64bit) perl >= 0:5.005_62 perl(Carp) perl(Exporter) perl(XSLoader) perl(constant) perl(strict) perl(warnings) perl-base >= 2:5.34.0 Processing files: perl-GSSAPI-debugsource-0.280.0-25.mga9.aarch64 Provides: perl-GSSAPI-debugsource = 0.280.0-25.mga9 perl-GSSAPI-debugsource(aarch-64) = 0.280.0-25.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: perl-GSSAPI-debuginfo-0.280.0-25.mga9.aarch64 Provides: debuginfo(build-id) = 05cc8b1fac9c9eba4d3fc52cb3c4de3f75a7a6e8 perl-GSSAPI-debuginfo = 0.280.0-25.mga9 perl-GSSAPI-debuginfo(aarch-64) = 0.280.0-25.mga9 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: perl-GSSAPI-debugsource(aarch-64) = 0.280.0-25.mga9 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-GSSAPI-0.280.0-25.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-GSSAPI-debuginfo-0.280.0-25.mga9.aarch64.rpm Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-GSSAPI-debugsource-0.280.0-25.mga9.aarch64.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.BPsJln + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd GSSAPI-0.28 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-GSSAPI-0.280.0-25.mga9.aarch64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.DCc0lr + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf GSSAPI-0.28 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!