D: [iurt_root_command] chroot
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
Installing /home/iurt/rpmbuild/SRPMS/perl-Convert-Scalar-1.120.0-8.mga9.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.7odJJb
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Convert-Scalar-1.12
+ /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/Convert-Scalar-1.12.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Convert-Scalar-1.12
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.jzCmeC
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-Scalar-1.12
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ export PERL_CANARY_STABILITY_NOPROMPT=1
+ PERL_CANARY_STABILITY_NOPROMPT=1
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.034000, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by Convert::Scalar.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by Convert::Scalar,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of Convert::Scalar with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Convert::Scalar
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8 V=1 VERBOSE=1 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
Running Mkbootstrap for Scalar ()
chmod 644 "Scalar.bs"
"/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644
cp Scalar.pm blib/lib/Convert/Scalar.pm
"/usr/bin/perl5.34.0" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Scalar.xs > Scalar.xsc
mv Scalar.xsc Scalar.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib64/perl5/CORE" Scalar.c
rm -f blib/arch/auto/Convert/Scalar/Scalar.so
gcc -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -L/usr/local/lib -fstack-protector-strong Scalar.o -o blib/arch/auto/Convert/Scalar/Scalar.so \
-lperl \
chmod 755 blib/arch/auto/Convert/Scalar/Scalar.so
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FMKjfj
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64
+ cd Convert-Scalar-1.12
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/Convert/Scalar/Scalar.so
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/lib64/perl5/vendor_perl/Convert/Scalar.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/man/man3/Convert::Scalar.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/bin/find-debuginfo -j8 --strict-build-id -m -i --build-id-seed 1.120.0-8.mga9 --unique-debug-suffix -1.120.0-8.mga9.aarch64 --unique-debug-src-base perl-Convert-Scalar-1.120.0-8.mga9.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Convert-Scalar-1.12
extracting debug info from /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/Convert/Scalar/Scalar.so
objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/Convert/Scalar/Scalar.so'; reason: Permission denied
objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/lib64/perl5/vendor_perl/auto/Convert/Scalar/Scalar.so'; reason: Permission denied
dwz: ./usr/lib64/perl5/vendor_perl/auto/Convert/Scalar/Scalar.so-1.120.0-8.mga9.aarch64.debug: Unknown debugging section .debug_line_str
original debug info size: 96kB, size after compression: 96kB
/usr/bin/sepdebugcrcfix: Updated 0 CRC32s, 1 CRC32s did match.
65 blocks
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 0
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/brp-remove-la-files
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.YAh9xI
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-Scalar-1.12
+ '[' 1 -eq 1 ']'
+ make test
"/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Scalar.bs blib/arch/auto/Convert/Scalar/Scalar.bs 644
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.34.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.t .... ok
t/01_utf8.t .... ok
t/02_call.t .... ok
t/03_refcnt.t .. ok
All tests successful.
Files=4, Tests=30, 0 wallclock secs ( 0.07 usr 0.02 sys + 0.09 cusr 0.01 csys = 0.19 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Convert-Scalar-1.120.0-8.mga9.aarch64
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.6nuuEU
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-Scalar-1.12
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/doc/perl-Convert-Scalar
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/doc/perl-Convert-Scalar
+ cp -pr COPYING /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/doc/perl-Convert-Scalar
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/doc/perl-Convert-Scalar
+ cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/doc/perl-Convert-Scalar
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64/usr/share/doc/perl-Convert-Scalar
+ RPM_EC=0
++ jobs -p
+ exit 0
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
warning: Found bdb_ro Packages database while attempting sqlite backend: using bdb_ro backend.
Provides: perl(Convert::Scalar) = 1.120.0 perl-Convert-Scalar = 1.120.0-8.mga9 perl-Convert-Scalar(aarch-64) = 1.120.0-8.mga9
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libperl.so.5.34()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) perl-base >= 2:5.34.0
Processing files: perl-Convert-Scalar-debugsource-1.120.0-8.mga9.aarch64
Provides: perl-Convert-Scalar-debugsource = 1.120.0-8.mga9 perl-Convert-Scalar-debugsource(aarch-64) = 1.120.0-8.mga9
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: perl-Convert-Scalar-debuginfo-1.120.0-8.mga9.aarch64
Provides: debuginfo(build-id) = 26b92f9bf3ced9560b1b8226012e971d2a5190c7 perl-Convert-Scalar-debuginfo = 1.120.0-8.mga9 perl-Convert-Scalar-debuginfo(aarch-64) = 1.120.0-8.mga9
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: perl-Convert-Scalar-debugsource(aarch-64) = 1.120.0-8.mga9
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Convert-Scalar-debugsource-1.120.0-8.mga9.aarch64.rpm
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Convert-Scalar-1.120.0-8.mga9.aarch64.rpm
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Convert-Scalar-debuginfo-1.120.0-8.mga9.aarch64.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.4ENMZ9
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Convert-Scalar-1.12
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Convert-Scalar-1.120.0-8.mga9.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.RYt6IP
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Convert-Scalar-1.12
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!