D: [iurt_root_command] chroot
warning: %make is deprecated, use %make_build instead
warning: %make is deprecated, use %make_build instead
Installing /home/iurt/rpmbuild/SRPMS/perl-Sys-Syslog-0.360.0-3.mga8.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.kPEjhl
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Sys-Syslog-0.36
+ /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/Sys-Syslog-0.36.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Sys-Syslog-0.36
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.sv1H7m
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-Syslog-0.36
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Sys::Syslog
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8
Running Mkbootstrap for Syslog ()
chmod 644 "Syslog.bs"
cp Syslog.pm blib/lib/Sys/Syslog.pm
"/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Syslog.bs blib/arch/auto/Sys/Syslog/Syslog.bs 644
"/usr/bin/perl5.32.0" "/usr/share/perl5/ExtUtils/xsubpp" -noprototypes -typemap '/usr/share/perl5/ExtUtils/typemap'  Syslog.xs > Syslog.xsc
mv Syslog.xsc Syslog.c
aarch64-mageia-linux-gnu-gcc -c   -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"0.36\" -DXS_VERSION=\"0.36\" -fPIC "-I/usr/lib64/perl5/CORE"  -DUSE_PPPORT_H Syslog.c
rm -f blib/arch/auto/Sys/Syslog/Syslog.so
aarch64-mageia-linux-gnu-gcc  -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -L/usr/local/lib -fstack-protector-strong  Syslog.o  -o blib/arch/auto/Sys/Syslog/Syslog.so  \
    -lperl   \
  
chmod 755 blib/arch/auto/Sys/Syslog/Syslog.so
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.dnE8Gl
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64
+ cd Sys-Syslog-0.36
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Syslog.bs blib/arch/auto/Sys/Syslog/Syslog.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Sys/Syslog/Syslog.so
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/vendor_perl/Sys/Syslog.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/man/man3/Sys::Syslog.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 0.360.0-3.mga8 --unique-debug-suffix -0.360.0-3.mga8.aarch64 --unique-debug-src-base perl-Sys-Syslog-0.360.0-3.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Sys-Syslog-0.36

explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Sys/Syslog/Syslog.so
extracting debug info from /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Sys/Syslog/Syslog.so
objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Sys/Syslog/Syslog.so'; reason: Permission denied
objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Sys/Syslog/Syslog.so'; reason: Permission denied
original debug info size: 104kB, size after compression: 104kB
/usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
71 blocks
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.jvfzFj
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-Syslog-0.36
+ '[' 1 -eq 1 ']'
+ /usr/bin/make -O -j8 test
"/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Syslog.bs blib/arch/auto/Sys/Syslog/Syslog.bs 644
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Sys::Syslog 0.36, Perl 5.032000, /usr/bin/perl5.32.0
t/00-load.t ............. ok
t/constants.t ........... ok
t/cpan-rt-21516.t ....... ok
t/cpan-rt-21866.t ....... skipped: Test::NoWarnings not available
t/cpan-rt-25488.t ....... skipped: Test::NoWarnings not available
t/cpan-rt-55151.t ....... ok
t/cpan-rt-64287.t ....... ok
t/data-validation.t ..... skipped: POE is not available
t/distchk.t ............. skipped: Test::Distribution required for checking distribution
t/facilities-routing.t .. skipped: POE is not available
t/pod.t ................. skipped: Test::Pod v1.14 required for testing POD
t/podcover.t ............ skipped: Test::Pod::Coverage 1.06 required for testing POD coverage
t/podspell.t ............ skipped: Pod spelling: for maintainer only
t/portfs.t .............. skipped: Test::Portability::Files required for testing filenames portability
t/syslog-inet-udp.t ..... ok
t/syslog.t .............. ok
All tests successful.
Files=16, Tests=340,  4 wallclock secs ( 0.15 usr  0.05 sys +  2.89 cusr  0.26 csys =  3.35 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Sys-Syslog-0.360.0-3.mga8.aarch64
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.ICUKVl
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-Syslog-0.36
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ cp -pr MYMETA.yml /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ cp -pr eg /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64/usr/share/doc/perl-Sys-Syslog
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Sys::Syslog) = 0.360.0 perl-Sys-Syslog = 0.360.0-3.mga8 perl-Sys-Syslog(aarch-64) = 0.360.0-3.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libperl.so.5.32()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) perl >= 0:5.005 perl(Carp) perl(Config) perl(Exporter) perl(Fcntl) perl(File::Basename) perl(File::Spec) perl(POSIX) perl(Socket) perl(Test::More) perl(XSLoader) perl(constant) perl(strict) perl(vars) perl(warnings) perl(warnings::register) perl-base >= 2:5.32.0
Processing files: perl-Sys-Syslog-debugsource-0.360.0-3.mga8.aarch64
Provides: perl-Sys-Syslog-debugsource = 0.360.0-3.mga8 perl-Sys-Syslog-debugsource(aarch-64) = 0.360.0-3.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: perl-Sys-Syslog-debuginfo-0.360.0-3.mga8.aarch64
Provides: debuginfo(build-id) = cf238b4f4aabdd6dcabe9002962697f21b1cff31 perl-Sys-Syslog-debuginfo = 0.360.0-3.mga8 perl-Sys-Syslog-debuginfo(aarch-64) = 0.360.0-3.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: perl-Sys-Syslog-debugsource(aarch-64) = 0.360.0-3.mga8
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Sys-Syslog-debugsource-0.360.0-3.mga8.aarch64.rpm
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Sys-Syslog-debuginfo-0.360.0-3.mga8.aarch64.rpm
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Sys-Syslog-0.360.0-3.mga8.aarch64.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.JbZBmm
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Sys-Syslog-0.36
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Sys-Syslog-0.360.0-3.mga8.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.AhQVNm
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Sys-Syslog-0.36
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!