D: [iurt_root_command] chroot
Installing /home/iurt/rpmbuild/SRPMS/perl-Jcode-2.70.0-23.mga8.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.k8ISnI
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Jcode-2.07
+ /usr/bin/bzip2 -dc /home/iurt/rpmbuild/SOURCES/Jcode-2.07.tar.bz2
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Jcode-2.07
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.8MvMzK
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Jcode-2.07
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Jcode
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8 V=1 VERBOSE=1 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
cp Jcode.pm blib/lib/Jcode.pm
cp Jcode/Nihongo.pod blib/lib/Jcode/Nihongo.pod
Manifying 2 pod documents
+ cd Unicode
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Generating a Unix-style Makefile
Writing Makefile for Jcode::Unicode
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8 V=1 VERBOSE=1 'CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables'
Running Mkbootstrap for Unicode ()
chmod 644 "Unicode.bs"
cp Unicode.pm blib/lib/Jcode/Unicode.pm
"/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Unicode.bs blib/arch/auto/Jcode/Unicode/Unicode.bs 644
"/usr/bin/perl5.32.0" "/usr/share/perl5/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/ExtUtils/typemap'  Unicode.xs > Unicode.xsc
mv Unicode.xsc Unicode.c
aarch64-mageia-linux-gnu-gcc -c   -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fasynchronous-unwind-tables -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"2.00\" -DXS_VERSION=\"2.00\" -fPIC "-I/usr/lib64/perl5/CORE"   Unicode.c
rm -f blib/arch/auto/Jcode/Unicode/Unicode.so
aarch64-mageia-linux-gnu-gcc  -lpthread -shared -Wl,--as-needed -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -L/usr/local/lib -fstack-protector-strong  Unicode.o  -o blib/arch/auto/Jcode/Unicode/Unicode.so  \
    -lperl   \
  
chmod 755 blib/arch/auto/Jcode/Unicode/Unicode.so
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.A3BzaK
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64
+ cd Jcode-2.07
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64 'INSTALL=/usr/bin/install -p'
Manifying 2 pod documents
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/perl5/vendor_perl/Jcode.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/perl5/vendor_perl/Jcode/Nihongo.pod
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/man/man3/Jcode.3pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/man/man3/Jcode::Nihongo.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/perllocal.pod
+ cd Unicode
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64 'INSTALL=/usr/bin/install -p'
"/usr/bin/perl5.32.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Unicode.bs blib/arch/auto/Jcode/Unicode/Unicode.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Jcode/Unicode/Unicode.so
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/vendor_perl/Jcode/Unicode.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/man/man3/Jcode::Unicode.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 2.70.0-23.mga8 --unique-debug-suffix -2.70.0-23.mga8.aarch64 --unique-debug-src-base perl-Jcode-2.70.0-23.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Jcode-2.07

explicitly decompress any DWARF compressed ELF sections in /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Jcode/Unicode/Unicode.so
extracting debug info from /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Jcode/Unicode/Unicode.so
objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Jcode/Unicode/Unicode.so'; reason: Permission denied
objcopy: unable to copy file '/home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/lib64/perl5/vendor_perl/auto/Jcode/Unicode/Unicode.so'; reason: Permission denied
original debug info size: 100kB, size after compression: 100kB
/usr/lib/rpm/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match.
1280 blocks
+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.iu4FmL
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Jcode-2.07
+ '[' 1 -eq 1 ']'
+ /usr/bin/make test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/append.t ... ok
t/convert.t .. ok
t/getcode.t .. ok
t/h2z.t ...... ok
t/jfold.t .... ok
t/length.t ... ok
t/mime.t ..... ok
t/new.t ...... ok
t/perl581.t .. ok
t/regex.t .... ok
t/tr.t ....... ok
All tests successful.
Files=11, Tests=244,  3 wallclock secs ( 0.15 usr  0.02 sys +  2.12 cusr  0.14 csys =  2.43 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Jcode-2.70.0-23.mga8.aarch64
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.H702wK
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Jcode-2.07
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/doc/perl-Jcode
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/doc/perl-Jcode
+ cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/doc/perl-Jcode
+ cp -pr Changes /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64/usr/share/doc/perl-Jcode
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Jcode) = 2.700.0 perl(Jcode::Unicode) = 2.0.0 perl-Jcode = 2.70.0-23.mga8 perl-Jcode(aarch-64) = 2.70.0-23.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libperl.so.5.32()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) perl >= 0:5.005 perl(Carp) perl(DynaLoader) perl(Exporter) perl(overload) perl(strict) perl(vars) perl-base >= 2:5.32.0
Processing files: perl-Jcode-debugsource-2.70.0-23.mga8.aarch64
Provides: perl-Jcode-debugsource = 2.70.0-23.mga8 perl-Jcode-debugsource(aarch-64) = 2.70.0-23.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Processing files: perl-Jcode-debuginfo-2.70.0-23.mga8.aarch64
Provides: debuginfo(build-id) = a292415a40c6be89358e29d7c9843f77d52e8c4d perl-Jcode-debuginfo = 2.70.0-23.mga8 perl-Jcode-debuginfo(aarch-64) = 2.70.0-23.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Recommends: perl-Jcode-debugsource(aarch-64) = 2.70.0-23.mga8
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Jcode-debuginfo-2.70.0-23.mga8.aarch64.rpm
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Jcode-2.70.0-23.mga8.aarch64.rpm
Wrote: /home/iurt/rpmbuild/RPMS/aarch64/perl-Jcode-debugsource-2.70.0-23.mga8.aarch64.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.CcabYI
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Jcode-2.07
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Jcode-2.70.0-23.mga8.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.JUIZMJ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Jcode-2.07
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!