D: [iurt_root_command] chroot
Installing /home/iurt/rpmbuild/SRPMS/perl-Gtk3-ImageView-4.0.0-1.mga8.src.rpm
Building target platforms: aarch64
Building for target aarch64
Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.9CMME0
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Gtk3-ImageView-4
+ /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/Gtk3-ImageView-4.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Gtk3-ImageView-4
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.7S4GvY
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Gtk3-ImageView-4
+ '[' 1 -eq 1 ']'
+ '[' 1 -eq 1 ']'
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Gtk3::ImageView
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -O -j8 V=1 VERBOSE=1
cp lib/Gtk3/ImageView/Tool/Dragger.pm blib/lib/Gtk3/ImageView/Tool/Dragger.pm
cp lib/Gtk3/ImageView/Tool/Selector.pm blib/lib/Gtk3/ImageView/Tool/Selector.pm
cp lib/Gtk3/ImageView/Tool.pm blib/lib/Gtk3/ImageView/Tool.pm
cp lib/Gtk3/ImageView.pm blib/lib/Gtk3/ImageView.pm
cp lib/Gtk3/ImageView/Tool/SelectorDragger.pm blib/lib/Gtk3/ImageView/Tool/SelectorDragger.pm
Manifying 1 pod document
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.v7xGlY
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ '[' 1 -eq 1 ']'
+ '[' /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64 '!=' / ']'
+ rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64
++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64
+ mkdir -p /home/iurt/rpmbuild/BUILDROOT
+ mkdir /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64
+ cd Gtk3-ImageView-4
+ '[' 1 -eq 1 ']'
+ /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64 'INSTALL=/usr/bin/install -p'
Manifying 1 pod document
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/perl5/vendor_perl/Gtk3/ImageView.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/perl5/vendor_perl/Gtk3/ImageView/Tool.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/perl5/vendor_perl/Gtk3/ImageView/Tool/SelectorDragger.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/perl5/vendor_perl/Gtk3/ImageView/Tool/Selector.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/perl5/vendor_perl/Gtk3/ImageView/Tool/Dragger.pm
Installing /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/man/man3/Gtk3::ImageView.3pm
Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/lib64/perl5/perllocal.pod
+ /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 4.0.0-1.mga8 --unique-debug-suffix -4.0.0-1.mga8.aarch64 --unique-debug-src-base perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/Gtk3-ImageView-4

+ /usr/lib/rpm/check-buildroot
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/compress_files .xz
+ '[' -n '' ']'
+ /usr/share/spec-helper/relink_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/clean_perl
+ '[' -n '' ']'
+ /usr/share/spec-helper/lib_symlinks
+ '[' -n '' ']'
+ /usr/share/spec-helper/gprintify
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_mo
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_pamd
+ '[' -n '' ']'
+ /usr/share/spec-helper/remove_info_dir
+ '[' -n '' ']'
+ /usr/share/spec-helper/fix_eol
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_desktop_files
+ '[' -n '' ']'
+ /usr/share/spec-helper/check_elf_files
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.VJet6Z
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Gtk3-ImageView-4
+ '[' 1 -eq 1 ']'
+ xvfb-run -a /usr/bin/make -O -j8 V=1 VERBOSE=1 test
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1_basics.t ....... ok
# PNG of the shown window:
# iVBORw0KGgoAAAANSUhEUgAAASwAAADIBAMAAACg8cFmAAAABGdBTUEAALGPC/xhBQAAACBjSFJN
# AAB6JgAAgIQAAPoAAACA6AAAdTAAAOpgAAA6mAAAF3CculE8AAAAHlBMVEUAAP/29fT/AADwDwDQ
# LwDAPwBwjwBAvwAA/wD///8il637AAAAAWJLR0QJ8dml7AAAAAd0SU1FB+UBFBUpOB7vjwcAAAEk
# SURBVHja7dzLCcJAGIVRW7AFHw1YgmADojXYgdqBli1ZCZJZTLyEn3DuaiCQHLL5drNaDVsP+zlt
# ZtjYd78nLCwsLKy/Wc0nc7D6fhQWFhYWVjeraHywsLCwsCKsovHBwsLCWjJre7pO3uXQxeqJz+72
# mLz7ceSFmSbun+/Je52xsLCwFs3qiU+clWkiFhYWFlaTVTQ+WFhYWFgRVtH4YGFhYWFFWEXjg4WF
# hYUVYRWNDxYWFhZWhFU0PlhYWFhYEVbR+GBhYWFhRVhF44OFhYWFFWEVjQ8WFhYWVoRVND5YWFhY
# WBFW0fhgYWFhLZkVvzCmzeqJT/x6nUwT48PCwsJaDqsnPvFlmoiFhYWF1WQVjQ8WFhYWVoRVND5Y
# WFhYWAnWB0NlAiAy0LSLAAAAJXRFWHRkYXRlOmNyZWF0ZQAyMDIxLTAxLTIwVDIxOjQxOjU2KzAw
# OjAwULksZwAAACV0RVh0ZGF0ZTptb2RpZnkAMjAyMS0wMS0yMFQyMTo0MTo1NiswMDowMCHklNsA
# AAAASUVORK5CYII=
t/2_transparent.t .. ok
t/3_zoom.t ......... ok
t/4_select.t ....... ok
t/90_MANIFEST.t .... ok
t/91_critic.t ...... skipped: Author test.  Set $ENV{TEST_AUTHOR} to a true value to run.
All tests successful.
Files=6, Tests=53,  7 wallclock secs ( 0.07 usr  0.02 sys +  3.35 cusr  0.41 csys =  3.85 CPU)
Result: PASS
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: perl-Gtk3-ImageView-4.0.0-1.mga8.noarch
Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.B0dKX0
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Gtk3-ImageView-4
+ DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/doc/perl-Gtk3-ImageView
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/doc/perl-Gtk3-ImageView
+ cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/doc/perl-Gtk3-ImageView
+ cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64/usr/share/doc/perl-Gtk3-ImageView
+ RPM_EC=0
++ jobs -p
+ exit 0
Provides: perl(Gtk3::ImageView) perl(Gtk3::ImageView::Tool) perl(Gtk3::ImageView::Tool::Dragger) perl(Gtk3::ImageView::Tool::Selector) perl(Gtk3::ImageView::Tool::SelectorDragger) perl-Gtk3-ImageView = 4.0.0-1.mga8
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: perl(Cairo) perl(Carp) perl(Glib) >= 1.210.0 perl(Glib::Object::Subclass) perl(Gtk3) perl(Gtk3::ImageView::Tool) perl(Gtk3::ImageView::Tool::Dragger) perl(Gtk3::ImageView::Tool::Selector) perl(List::Util) perl(POSIX) perl(Readonly) perl(Scalar::Util) perl(base) perl(feature) perl(strict) perl(warnings) perl-base >= 2:5.32.0
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64
Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-Gtk3-ImageView-4.0.0-1.mga8.noarch.rpm
Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.purdAZ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ cd Gtk3-ImageView-4
+ /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-Gtk3-ImageView-4.0.0-1.mga8.aarch64
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.4LqkfZ
+ umask 022
+ cd /home/iurt/rpmbuild/BUILD
+ rm -rf Gtk3-ImageView-4
+ RPM_EC=0
++ jobs -p
+ exit 0
D: [iurt_root_command] Success!