D: [iurt_root_command] chroot Installing /home/iurt/rpmbuild/SRPMS/perl-CPANPLUS-0.991.0-2.mga8.src.rpm Building target platforms: aarch64 Building for target aarch64 Executing(%prep): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.IcB9uY + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/iurt/rpmbuild/BUILD + rm -rf CPANPLUS-0.9910 + /usr/bin/gzip -dc /home/iurt/rpmbuild/SOURCES/CPANPLUS-0.9910.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd CPANPLUS-0.9910 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (9b698b1ea0b9318deba9803f291a1a27193ce0f4.patch):' Patch #0 (9b698b1ea0b9318deba9803f291a1a27193ce0f4.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file lib/CPANPLUS/Internals/Constants/Report.pm + rm -f t/20_CPANPLUS-Dist-MM.t + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.FvRyyV + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd CPANPLUS-0.9910 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor ### IMPORTANT! ###################################################### As of CPANPLUS 0.070, configuration during 'perl Makefile.PL' is no longer required. A default config is now shipped that should work out of the box on most machines, for priviliged and unprivileged users. If you wish to configure CPANPLUS to your environment, you can either do that from the interactive shell after installation: $ cpanp CPAN Terminal> s reconfigure Or you can invoke this program as follows, to do it now: $ /usr/bin/perl5.32.0 Makefile.PL --setup This also means that any config created by any CPANPLUS older than 0.070 will no longer work, and you are required to reconfigure. See the ChangeLog file for details. We appologize for the inconvenience. ### PLEASE NOTE ################################################### CPANPLUS also ships a 'boxed' cpanp client, so you can run it out of it's extraction dir, by typing: $ perl bin/cpanp-boxed This may help you with bootstrap issues, or other situations where you need to use CPANPLUS but can not use a system installation. You can install all of CPANPLUS' dependencies like this, before installing CPANPLUS itself by running: $ perl bin/cpanp-boxed -s selfupdate dependencies All the modules bundled are found in the 'inc/bundle' directory. If you, for whatever reason, wish to not install these from cpan, you could include them into your environment as such (using tcsh): $ setenv PERL5LIB /home/iurt/rpmbuild/BUILD/CPANPLUS-0.9910/inc/bundle ################################################################### ### IMPORTANT! ###################################################### Your site and core script locations are different. We will be put the scripts provided by this distribution in the site location. Please ensure that the site location is in your PATH. ##################################################################### Checking if your kit is complete... Warning: the following files are missing in your kit: t/20_CPANPLUS-Dist-MM.t Please inform the author. Generating a Unix-style Makefile Writing Makefile for CPANPLUS Writing MYMETA.yml and MYMETA.json Subroutine load_file redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 15. Subroutine load_string redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 31. Subroutine load_yaml_string redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 44. Subroutine load_json_string redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 52. Subroutine yaml_backend redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 62. Subroutine json_decoder redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 78. Subroutine json_backend redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 94. Subroutine _slurp redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 120. Subroutine _can_load redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 129. Subroutine LoadFile redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 146. Subroutine Load redefined at /usr/share/perl5/Parse/CPAN/Meta.pm line 151. + /usr/bin/make -O -j8 V=1 VERBOSE=1 cp lib/CPANPLUS/Error.pm blib/lib/CPANPLUS/Error.pm cp lib/CPANPLUS/Hacking.pod blib/lib/CPANPLUS/Hacking.pod cp lib/CPANPLUS/Internals/Utils.pm blib/lib/CPANPLUS/Internals/Utils.pm cp lib/CPANPLUS/Internals/Fetch.pm blib/lib/CPANPLUS/Internals/Fetch.pm cp lib/CPANPLUS/Module.pm blib/lib/CPANPLUS/Module.pm cp lib/CPANPLUS/Internals/Source/Memory.pm blib/lib/CPANPLUS/Internals/Source/Memory.pm cp lib/CPANPLUS/Internals/Source/SQLite.pm blib/lib/CPANPLUS/Internals/Source/SQLite.pm cp lib/CPANPLUS/Module/Author.pm blib/lib/CPANPLUS/Module/Author.pm cp lib/CPANPLUS/Shell/Classic.pm blib/lib/CPANPLUS/Shell/Classic.pm cp lib/CPANPLUS/Configure/Setup.pm blib/lib/CPANPLUS/Configure/Setup.pm cp lib/CPANPLUS/Shell.pm blib/lib/CPANPLUS/Shell.pm cp lib/CPANPLUS/Internals.pm blib/lib/CPANPLUS/Internals.pm cp lib/CPANPLUS/Module/Signature.pm blib/lib/CPANPLUS/Module/Signature.pm cp lib/CPANPLUS/Dist/MM.pm blib/lib/CPANPLUS/Dist/MM.pm cp lib/CPANPLUS/Internals/Constants/Report.pm blib/lib/CPANPLUS/Internals/Constants/Report.pm cp lib/CPANPLUS/Dist/Autobundle.pm blib/lib/CPANPLUS/Dist/Autobundle.pm cp lib/CPANPLUS/Selfupdate.pm blib/lib/CPANPLUS/Selfupdate.pm cp lib/CPANPLUS/Internals/Extract.pm blib/lib/CPANPLUS/Internals/Extract.pm cp lib/CPANPLUS/FAQ.pod blib/lib/CPANPLUS/FAQ.pod cp lib/CPANPLUS/Backend.pm blib/lib/CPANPLUS/Backend.pm cp lib/CPANPLUS/Config/HomeEnv.pm blib/lib/CPANPLUS/Config/HomeEnv.pm cp lib/CPANPLUS/Internals/Constants.pm blib/lib/CPANPLUS/Internals/Constants.pm cp lib/CPANPLUS/Dist/Sample.pm blib/lib/CPANPLUS/Dist/Sample.pm cp lib/CPANPLUS/Dist/Base.pm blib/lib/CPANPLUS/Dist/Base.pm cp lib/CPANPLUS/Internals/Source/SQLite/Tie.pm blib/lib/CPANPLUS/Internals/Source/SQLite/Tie.pm cp lib/CPANPLUS/Backend/RV.pm blib/lib/CPANPLUS/Backend/RV.pm cp lib/CPANPLUS/Internals/Source.pm blib/lib/CPANPLUS/Internals/Source.pm cp lib/CPANPLUS/Module/Fake.pm blib/lib/CPANPLUS/Module/Fake.pm cp lib/CPANPLUS.pm blib/lib/CPANPLUS.pm cp lib/CPANPLUS/Internals/Report.pm blib/lib/CPANPLUS/Internals/Report.pm cp lib/CPANPLUS/Module/Checksums.pm blib/lib/CPANPLUS/Module/Checksums.pm cp lib/CPANPLUS/Internals/Utils/Autoflush.pm blib/lib/CPANPLUS/Internals/Utils/Autoflush.pm cp lib/CPANPLUS/Module/Author/Fake.pm blib/lib/CPANPLUS/Module/Author/Fake.pm cp lib/CPANPLUS/Dist.pm blib/lib/CPANPLUS/Dist.pm cp lib/CPANPLUS/Internals/Search.pm blib/lib/CPANPLUS/Internals/Search.pm cp lib/CPANPLUS/Config.pm blib/lib/CPANPLUS/Config.pm cp lib/CPANPLUS/Configure.pm blib/lib/CPANPLUS/Configure.pm cp lib/CPANPLUS/Shell/Default.pm blib/lib/CPANPLUS/Shell/Default.pm cp lib/CPANPLUS/Shell/Default/Plugins/Source.pm blib/lib/CPANPLUS/Shell/Default/Plugins/Source.pm cp lib/CPANPLUS/Shell/Default/Plugins/Remote.pm blib/lib/CPANPLUS/Shell/Default/Plugins/Remote.pm cp lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm blib/lib/CPANPLUS/Shell/Default/Plugins/CustomSource.pm cp lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod blib/lib/CPANPLUS/Shell/Default/Plugins/HOWTO.pod cp bin/cpanp blib/script/cpanp "/usr/bin/perl5.32.0" "-Iinc" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpanp cp bin/cpan2dist blib/script/cpan2dist "/usr/bin/perl5.32.0" "-Iinc" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpan2dist cp bin/cpanp-run-perl blib/script/cpanp-run-perl "/usr/bin/perl5.32.0" "-Iinc" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/cpanp-run-perl Manifying 2 pod documents Manifying 33 pod documents Manifying 3 pod documents + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.480ICX + umask 022 + cd /home/iurt/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 '!=' / ']' + rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 ++ dirname /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 + mkdir -p /home/iurt/rpmbuild/BUILDROOT + mkdir /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 + cd CPANPLUS-0.9910 + '[' 1 -eq 1 ']' + /usr/bin/make install DESTDIR=/home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 'INSTALL=/usr/bin/install -p' Manifying 2 pod documents Manifying 33 pod documents Manifying 3 pod documents Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Module.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Backend.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Error.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Selfupdate.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Config.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Hacking.pod Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Configure.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Dist.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/FAQ.pod Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell/Default.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell/Classic.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell/Default/Plugins/Source.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell/Default/Plugins/HOWTO.pod Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell/Default/Plugins/CustomSource.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Shell/Default/Plugins/Remote.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Config/HomeEnv.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Dist/Sample.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Dist/Base.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Dist/MM.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Dist/Autobundle.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Configure/Setup.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Constants.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Source.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Report.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Search.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Fetch.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Utils.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Extract.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Utils/Autoflush.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Constants/Report.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Source/SQLite.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Source/Memory.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Internals/Source/SQLite/Tie.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Backend/RV.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Module/Checksums.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Module/Signature.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Module/Author.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Module/Fake.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/perl5/vendor_perl/CPANPLUS/Module/Author/Fake.pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man1/cpanp.1 Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man1/cpan2dist.1 Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Dist::Base.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Backend.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Source.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Module::Fake.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell::Default::Plugins::HOWTO.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Report.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Dist::Sample.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Module::Author.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Module::Author::Fake.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Backend::RV.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell::Default::Plugins::Source.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Dist::MM.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Source::SQLite.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::FAQ.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Hacking.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Error.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Dist::Autobundle.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Source::Memory.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Utils.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Extract.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Config::HomeEnv.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell::Default::Plugins::CustomSource.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Configure.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Search.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell::Classic.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Module.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell::Default.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Module::Checksums.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Internals::Fetch.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Dist.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Config.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Selfupdate.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/man/man3/CPANPLUS::Shell::Default::Plugins::Remote.3pm Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/bin/cpan2dist Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/bin/cpanp Installing /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/bin/cpanp-run-perl Appending installation info to /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/lib64/perl5/perllocal.pod + /usr/lib/rpm/find-debuginfo.sh -j8 --strict-build-id -m -i --build-id-seed 0.991.0-2.mga8 --unique-debug-suffix -0.991.0-2.mga8.aarch64 --unique-debug-src-base perl-CPANPLUS-0.991.0-2.mga8.aarch64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /home/iurt/rpmbuild/BUILD/CPANPLUS-0.9910 + /usr/lib/rpm/check-buildroot + '[' -n '' ']' + /usr/share/spec-helper/clean_files + '[' -n '' ']' + /usr/share/spec-helper/compress_files .xz + '[' -n '' ']' + /usr/share/spec-helper/relink_symlinks + '[' -n '' ']' + /usr/share/spec-helper/clean_perl + '[' -n '' ']' + /usr/share/spec-helper/lib_symlinks + '[' -n '' ']' + /usr/share/spec-helper/gprintify + '[' -n '' ']' + /usr/share/spec-helper/fix_mo + '[' -n '' ']' + /usr/share/spec-helper/fix_pamd + '[' -n '' ']' + /usr/share/spec-helper/remove_info_dir + '[' -n '' ']' + /usr/share/spec-helper/fix_eol + '[' -n '' ']' + /usr/share/spec-helper/check_desktop_files + '[' -n '' ']' + /usr/share/spec-helper/check_elf_files + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python3 1 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Executing(%check): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.QVoCYW + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd CPANPLUS-0.9910 + '[' 1 -eq 1 ']' + /usr/bin/make test PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/08_CPANPLUS-Backend.t ....................... ok t/00_CPANPLUS-Internals-Utils.t ............... ok t/01_CPANPLUS-Configure.t ..................... ok t/02_CPANPLUS-Internals.t ..................... ok t/031_CPANPLUS-Internals-Source-SQLite.t ...... skipped: SQLite engine not available t/032_CPANPLUS-Internals-Source-via-sqlite.t .. skipped: SQLite engine not available t/03_CPANPLUS-Internals-Source.t .............. ok t/04_CPANPLUS-Module.t ........................ ok t/05_CPANPLUS-Internals-Fetch.t ............... ok t/06_CPANPLUS-Internals-Constants.t ........... ok t/07_CPANPLUS-Internals-Extract.t ............. ok t/09_CPANPLUS-Internals-Search.t .............. ok t/10_CPANPLUS-Error.t ......................... ok t/15_CPANPLUS-Shell.t ......................... ok t/19_CPANPLUS-Dist.t .......................... ok t/21_CPANPLUS-Dist-No-Build.t ................. ok t/25_CPANPLUS.t ............................... ok t/30_CPANPLUS-Internals-Selfupdate.t .......... ok t/40_CPANPLUS-Internals-Report.t .............. ok All tests successful. Files=19, Tests=1534, 33 wallclock secs ( 0.46 usr 0.03 sys + 20.45 cusr 3.16 csys = 24.10 CPU) Result: PASS + RPM_EC=0 ++ jobs -p + exit 0 Processing files: perl-CPANPLUS-0.991.0-2.mga8.noarch Executing(%doc): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.2BygOW + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd CPANPLUS-0.9910 + DOCDIR=/home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + cp -pr ChangeLog /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + cp -pr META.json /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + cp -pr META.yml /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + cp -pr MYMETA.yml /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + cp -pr README /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64/usr/share/doc/perl-CPANPLUS + RPM_EC=0 ++ jobs -p + exit 0 Argument "0.15_02" isn't numeric in numeric eq (==) at /usr/lib/rpm/mageia/perl.req-from-meta line 28. Provides: perl(CPANPLUS) = 0.991.0 perl(CPANPLUS::Backend) = 0.991.0 perl(CPANPLUS::Backend::RV) = 0.991.0 perl(CPANPLUS::Config) = 0.991.0 perl(CPANPLUS::Config::HomeEnv) = 0.991.0 perl(CPANPLUS::Configure) = 0.991.0 perl(CPANPLUS::Configure::Setup) = 0.991.0 perl(CPANPLUS::Dist) = 0.991.0 perl(CPANPLUS::Dist::Autobundle) = 0.991.0 perl(CPANPLUS::Dist::Base) = 0.991.0 perl(CPANPLUS::Dist::MM) = 0.991.0 perl(CPANPLUS::Dist::Sample) = 0.991.0 perl(CPANPLUS::Error) = 0.991.0 perl(CPANPLUS::Internals) = 0.991.0 perl(CPANPLUS::Internals::Constants) = 0.991.0 perl(CPANPLUS::Internals::Constants::Report) = 0.991.0 perl(CPANPLUS::Internals::Extract) = 0.991.0 perl(CPANPLUS::Internals::Fetch) = 0.991.0 perl(CPANPLUS::Internals::Report) = 0.991.0 perl(CPANPLUS::Internals::Search) = 0.991.0 perl(CPANPLUS::Internals::Source) = 0.991.0 perl(CPANPLUS::Internals::Source::Memory) = 0.991.0 perl(CPANPLUS::Internals::Source::SQLite) = 0.991.0 perl(CPANPLUS::Internals::Source::SQLite::Tie) = 0.991.0 perl(CPANPLUS::Internals::Utils) = 0.991.0 perl(CPANPLUS::Internals::Utils::Autoflush) = 0.991.0 perl(CPANPLUS::Module) = 0.991.0 perl(CPANPLUS::Module::Author) = 0.991.0 perl(CPANPLUS::Module::Author::Fake) = 0.991.0 perl(CPANPLUS::Module::Checksums) = 0.991.0 perl(CPANPLUS::Module::Fake) = 0.991.0 perl(CPANPLUS::Module::Signature) = 0.991.0 perl(CPANPLUS::Selfupdate) = 0.991.0 perl(CPANPLUS::Shell) = 0.991.0 perl(CPANPLUS::Shell::Classic) = 0.991.0 perl(CPANPLUS::Shell::Default) = 0.991.0 perl(CPANPLUS::Shell::Default::Plugins::CustomSource) = 0.991.0 perl(CPANPLUS::Shell::Default::Plugins::Remote) = 0.991.0 perl(CPANPLUS::Shell::Default::Plugins::Source) = 0.991.0 perl(CPANPLUS::Shell::_Base::ReadLine) perl-CPANPLUS = 0.991.0-2.mga8 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: perl >= 0:5.006001 perl(Archive::Extract) >= 0.160.0 perl(Archive::Tar) >= 1.230.0 perl(CPANPLUS) perl(CPANPLUS::Backend) perl(CPANPLUS::Backend::RV) perl(CPANPLUS::Config) perl(CPANPLUS::Configure) perl(CPANPLUS::Configure::Setup) perl(CPANPLUS::Dist) perl(CPANPLUS::Dist::Base) perl(CPANPLUS::Error) perl(CPANPLUS::Internals) perl(CPANPLUS::Internals::Constants) perl(CPANPLUS::Internals::Constants::Report) perl(CPANPLUS::Internals::Extract) perl(CPANPLUS::Internals::Fetch) perl(CPANPLUS::Internals::Report) perl(CPANPLUS::Internals::Search) perl(CPANPLUS::Internals::Source) perl(CPANPLUS::Internals::Source::SQLite::Tie) perl(CPANPLUS::Internals::Utils) perl(CPANPLUS::Module) perl(CPANPLUS::Module::Author) perl(CPANPLUS::Module::Author::Fake) perl(CPANPLUS::Module::Checksums) perl(CPANPLUS::Module::Fake) perl(CPANPLUS::Module::Signature) perl(CPANPLUS::Selfupdate) perl(CPANPLUS::Shell) perl(Carp) perl(Config) perl(Cwd) perl(DBD::SQLite) perl(Data::Dumper) perl(Digest::SHA) perl(Exporter) perl(ExtUtils::Install) >= 1.420.0 perl(File::Basename) perl(File::Copy) perl(File::Fetch) >= 0.150.200 perl(File::Find) perl(File::Path) perl(File::Spec) >= 0.820.0 perl(File::Spec::Unix) perl(File::Temp) perl(FileHandle) perl(Getopt::Long) perl(IO::Zlib) >= 1.40.0 perl(IPC::Cmd) >= 0.360.0 perl(Locale::Maketext::Simple) >= 0.10.0 perl(Log::Message) >= 0.10.0 perl(Module::CoreList) >= 2.220.0 perl(Module::Load) >= 0.100.0 perl(Module::Load::Conditional) >= 0.500.0 perl(Module::Loaded) >= 0.10.0 perl(Module::Pluggable) >= 2.400.0 perl(Module::Signature) >= 0.60.0 perl(Object::Accessor) >= 0.440.0 perl(Package::Constants) >= 0.10.0 perl(Params::Check) >= 0.360.0 perl(Parse::CPAN::Meta) >= 1.420.0 perl(Storable) perl(Term::ReadLine) perl(Term::UI) >= 0.180.0 perl(Test::Harness) >= 2.620.0 perl(Test::More) >= 0.470.0 perl(Tie::Hash) perl(Time::Local) perl(base) perl(constant) perl(overload) perl(strict) perl(vars) perl(version) >= 0.770.0 perl(warnings) perl-base >= 2:5.32.0 Recommends: perl-CPANPLUS-Dist-Mageia Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 Wrote: /home/iurt/rpmbuild/RPMS/noarch/perl-CPANPLUS-0.991.0-2.mga8.noarch.rpm Executing(%clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.nxPPWW + umask 022 + cd /home/iurt/rpmbuild/BUILD + cd CPANPLUS-0.9910 + /usr/bin/rm -rf /home/iurt/rpmbuild/BUILDROOT/perl-CPANPLUS-0.991.0-2.mga8.aarch64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(--clean): /bin/sh -e /home/iurt/rpmbuild/tmp/rpm-tmp.hrz0rY + umask 022 + cd /home/iurt/rpmbuild/BUILD + rm -rf CPANPLUS-0.9910 + RPM_EC=0 ++ jobs -p + exit 0 D: [iurt_root_command] Success!